Product listing: Dahle Model 550 Professional Rolling Trimmer - 14 1/8 Inch (DAH550) to 50" Aluminum Squeegee (SQAL50)
-
Dahle Model 550 Professional Rolling Trimmer - 14 1/8 Inch (DAH550)
- Cuts up to 20 sheets of paper at a time
- Self-sharpening blade cuts in either direction
- Blade is made of ground steel and encased in a plastic housing for safety
- Automatic paper clamp holds work securely
- Adjustable backstop
Part #: DAH550 -
Non-Expiring Wristband - Light Blue - 1000pk (06853)
- Type: Wristband - Light Blue
- Attachment Method: Adhesive
- Size: 1" x 10" (25mm x 254mm)
- Quantity: 1000
- Part Number: 06853
Part #: 06853 -
White 1/2" Gator Foam 24" x 36" Mounting Boards - 3pk (550470)
- Board Type: Gator Foam Mounting Boards (Uncoated)
- Board Thickness: 1/2"
- Board Size: 24" x 36"
- Board Color: White
- Quantity: 3 Per Box
Part #: 550470 -
Xtreme 5' x 8' Table-Top Cutting Mat (Unprinted) (CM58)
- Protect Your table Top.
- Cutting Blades Last Longer.
- Made From Virgin High Impact Polymer Blend.
- Sooper Tough.
- 60" x 96".
Part #: CM58 -
White 4mm Corrugated Plastic 20" x 30" Adhesive Boards 10pk (CWSA2030)
- Board Type: Corrugated Plastic Mounting Boards with Adhesive
- Board Thickness: 4mm
- Board Size: 20" x 30"
- Board Color: White
- Quantity: 10 Sheets Per Box
Part #: CWSA2030 -
SealerSales Portable PTFE Coated 6" Direct Heat Sealer with Temp Controller (KF-150CSTA)
- 6" Direct Heat Sealer.
- Ideal for sealing cellophane, coated aluminum foil, Kraft paper, and other thicker materials.
- Two PTFE coated, serrated jaws.
- Seal Width - 5/8" or 15mm.
- Adjustable temperature controller for wider range of settings.
Part #: KF-150CSTA -
Drytac Dynamic Plus Matte 3.2mil 54" x 150' Pressure-Sensitive Overlaminating Film (LFC2-M54150)
- Recommended for interior and exterior use where a non-glare finish is required or where specific lighting conditions cannot be controlled.
- Ideal for POP displays, exhibition graphics and promotional signage that will be viewed under direct lighting from different angles.
- Size: 54" x 150'
- Film: Matte Monomeric Soft Calendared PVC
- Adhesive: Acrylic (Pressure Sensitive)
Part #: LFC2-M54150 -
Intimus Shredder Oil - 1 Gallon Bottles (4pk) (78839)
- Item Number: 78839
- Size: 1 gallon Bottle
- Bottles per Case: 4
- Compatible Models: Intimus Shredders
- Item Number: 78839
Part #: 78839 -
Dahle Model Professional 18 Inch Guillotine Paper Cutter (534)
- Cuts up to 15 sheets of paper at a time (212-218)
- Ground self-sharpening blade made of Solingen Steel
- Sturdy blade will not fly up or drop down
- Manual paper clamp protects fingers and holds work securely
- Sturdy metal base with preprinted guides
Part #: 534 -
Destroyit MBM Shredder Oil - 1 Quart Bottle (6pk) (MB-ACCED21/6)
- Quantity: 6 Bottles (1 Quart Each)
- Part Number: ACCED21/6
- Quantity: 6 Bottles (1 Quart Each)
- Part Number: ACCED21/6
- Shredder Type: Shredder Oil
Part #: MB-ACCED21/6 -
16" x 20" Print Protector Display Sleeve - 25pk (TPHX16X20)
- Size: 16" x 20"
- Opening: 16" Side (Opening is 1/8" Larger for Easy Insertion)
- Part Number: TPHX16X20
- Quantity: 25 Per Box
- Size: 16" x 20"
Part #: TPHX16X20 -
Luxor 48" x 36" Reversible Magnetic Steel Mobile Whiteboard (MB4836WW)
- Measures 51.5"W x 20.5"D x 65.5"H with frame.
- Made of painted steel with aluminum frame.
- Both sides of the reversible whiteboard are magnetic.
- Board measures 48"W x 36"H.
- Rolling whiteboard features four casters, two with locking brakes, for easy maneuverability and stability.
Part #: MB4836WW -
Flipside 36" x 48" White Foam Project Boards - 24pk (FS-30048)
- Ideal for science fairs, art shows, business presentations and classroom projects!
- The smooth, bright white surface has a slightly glossy finish that easily accepts markers, crayons, paints and adhesives.
- Measures 36" high x 48" wide overall-side panels measure 36" high x 12" wide and the center panel measures 36" high x 24" wide.
- Back of board and core are white.
- Set of 24
Part #: FS-30048 -
28lb 8.5" x 11" 7 Hole Left Recycled Punched Paper - 1250 Sheets (MY8.5X117HLRPP28CS)
- Color: White
- Size: 8.5" x 11"
- Paper Thickness: 28lb
- Hole Pattern 7 Hole (along left side)
- Hole Size: 1/4"
Part #: MY8.5X117HLRPP28CS -
H. Wilson Black Adjustable Height 3-Shelf Steel A/V Cart (W42AE)
- Multipurpose steel utility cart perfect for use with audio/video equipment and more.
- Roll formed shelves with powder coat paint finish.
- Tables are robotically-welded for stability, with easy-access cable holes to keep the cart clean, organized and safe.
- Measures 24"W x 18"D x 42"H with adjustable height from 24" to 42" in 2" increments.
- .25" retaining lip borders flat shelves.
Part #: W42AE -
Swingline GBC Fusion 3000L 12" Laminator (SWI-1703075)
- Warms-up in only 1 minutes and 30 seconds
- Laminating speed of 19" per minute
- Intelligent Jam Alert System™ beeps until button is pressed to release jammed pouch
- Maximum document width of 12"
- Use with 3 and 5 mil thermal pouches
Part #: SWI-1703075 -
8-3/8" x 8-7/8" Crystal Clear Adhesive Vinyl Pockets 100pk (STB-1641)
- Pocket Material: High Quality Crystal Clear Vinyl
- Pocket Thickness: 8 ga.
- Adhesive Type: Permanent (Sticks To Almost Any Flat Surface)
- Opens On: Short Side With 1/4" Lip
- Inside Dimensions: 8-3/8" x 8-7/8"
Part #: STB-1641 -
Xerox Synthetic Paper 4.7mil 11" x 17" - 100pk (X3R12365)
- Weather Proof: Able to withstand water, heat and temperature variations, suitable for indoor and outdoor uses
- Durable: Tear proof, fade resistant
- Harsh Environmental Performance: Grease, solvent, chemical, blood and sweat resistant
- Restrictions: Not for use with ink jet printers
- Promotes workflow efficiency: No need to laminate
Part #: X3R12365 -
Spiel Sterling Hot Melt Glue for Perfect Binder - 10lb (Digiglue)
- High quality hot melt glue used for perfect binding.
- Ideal for offset, coated, and oil infused stock.
- Perfect for binderies, commercial, and on demand printers.
- It is packed in a 10lb box.
- High quality hot melt glue used for perfect binding.
Part #: Digiglue -
Clear Vertical Locking Plastic Card Holder - 50pk (MYBP706LT1)
- Type: Card Holder
- Color: Clear
- Orientation: Vertical
- Size: 3-3/8" x 2-1/8"
- Quantity: 50 pieces
Part #: MYBP706LT1 -
Performance Office Papers 20lb 34" x 500' Bond Engineering Roll With 3" Black Core (2 Rolls) (POPE34500)
- Paper Size: 34" x 500'
- Core Size: 3"
- Color: White
- Basis Weight: 20#
- Brightness: 92
Part #: POPE34500 -
Drytac Double-Sided Clear Silicone Release Film - 41" x 82' (CRP41082)
- Product Type: Silicone Release Paper (Double-Sided)
- Size: 41" x 82'
- Application: Picture Framing/Photography
- Part Number: CRP41082
- A transparent film coated on both sides with a superior quality silicone release agent.
Part #: CRP41082 -
Drytac Double-Sided Clear Silicone Release Film (DDSCLRSRF)
- Product Type: Silicone Release Paper (Double-Sided)
- Life Expectancy: Over ten times that of silicone release paper.
- Application: Picture Framing/Photography
- A transparent film coated on both sides with a superior quality silicone release agent.
- Used in any heated press.
Part #: DDSCLRSRF -
Black Round Slider Optibraid Lanyard with Swivel Hook - 100pk (2135-4573)
- Type: Optibraid Break-Away Lanyard
- Thickness: 1/4" (6mm) diameter
- Length: 36 Inches
- Color: Black
- Slider: Yes (Round)
Part #: 2135-4573 -
Navy Blue Diamond Slider Optibraid Lanyard with Bulldog Clip - 100pk (2135-4519)
- Type: Optibraid Break-Away Lanyard
- Thickness: 1/4" (6mm) diameter
- Length: 36 Inches
- Color: Navy Blue
- Slider: Yes (Diamond)
Part #: 2135-4519 -
Navy Blue Round Slider Optibraid Lanyard with Plastic Hook - 100pk (2135-4583)
- Type: Optibraid Break-Away Lanyard
- Thickness: 1/4" (6mm) diameter
- Length: 36 Inches
- Color: Navy Blue
- Slider: Yes (Round)
Part #: 2135-4583 -
Royal Blue Round Slider Optibraid Lanyard with Bulldog Clip - 100pk (2135-4590)
- Type: Optibraid Break-Away Lanyard
- Thickness: 1/4" (6mm) diameter
- Length: 36 Inches
- Color: Royal Blue
- Slider: Yes (Round)
Part #: 2135-4590 -
Synaps Synthetic Paper 8mil 12" x 18" - 100pk (NCSXM188)
- No special inks required for offset presses
- Dries like uncoated paper
- HP Indigo compatible
- Superior adhesion without surface treatment for Indigo presses
- Luxurious look and feel
Part #: NCSXM188 -
GBC Replacement Cutting Stick for Classicut CL800 Stack Cutter (1500CM)
- Each cutting stick has four cutting surfaces and should be replaced when worn.
- 3/8' X 15-3/4".
- 2 sticks per pack.
- Part Number: 1500CM
- Each cutting stick has four cutting surfaces and should be replaced when worn.
Part #: 1500CM -
50" Aluminum Squeegee (SQAL50)
- Light weight aluminum construction.
- Use for small and large applications.
- Large format installs on windows - vehicles - walls - floors etc.
- Comes with threaded handle for use with standard paint roller extention.
- Sooper Glide felt edges for smooth application.
Part #: SQAL50
