Product listing: Daige Speedcote 12.5" Wax Coater (Speedcote12) to Drytac MHA 51" x 328' Multi Heat Activated Mounting Adhesive (MHA51328)
-
Daige Speedcote 12.5" Wax Coater (Speedcote12)
- Features:
- Automatically warm up in 40 minutes
- Applies a full adhesive wax coating in seconds (2 sec./ft)
- Will not effect heat sensitive media
- No clean up, no maintenance at all
Part #: Speedcote12 -
Akiles Coilmac ECI+ Oval Hole Coil Binding Machine (Coilmac-ECI+)
- Fully Disengageable Punch Pins: For a clean punch with virtually any document length.
- Punching Margin Control: Provides the correct punch-margin-depth for each coil size and maximizes the document's tear resistance.
- Open Punching Throat and Continuous Punching Guide: For an easy alignment and punching of longer documents.
- Side Margin Control: Provides an evenly centered punch for all document sizes.
- Oval Punching holes to help improve spiral coil inserting.
Part #: Coilmac-ECI+ -
GBC MC12 12" Manual Twin Loop Wire Closer (1770600)
- Spine-size adjustment knobs.
- Durable, heavy-duty design.
- Non-slip rubber feet.
- Bind sheets up to 12".
- Fully compatible with both 2:1 Pitch and 3:1 Pitch Wire Binding Spines
Part #: 1770600 -
Duplo 400 Upper High Speed Steel Replacement Blade (JH-10089HSS)
- Type of Blade: High Speed Steel
- Dimensions (L x W x T): 16.125" x 2.610" x .470"
- Holes/Slots: 10
- Hole Size: 2M6/6M4
- Type of Blade: High Speed Steel
Part #: JH-10089HSS -
Pivano 103-1 FG103 Replacement Blade (JH-42870)
- Compatible Models: Pivano 103-1, FG 103
- Material: Standard Inlay
- Holes: 30
- Length: 51.85"
- With: 5.708"
Part #: JH-42870 -
Martin Yale 12" Commercial Stack Cutter (7000E)
- Includes all the heavy-duty features needed to cut large stacks of paper
- Cuts a stack of paper up to 12" wide and 1 1/2" thick
- Adjustable paper stop
- Positive clamp holds paper in place, eliminating shifting and tearing
- Heavy-duty wood base
Part #: 7000E -
Akiles DuoMac 421 4:1 Coil and 2:1 Wire Binding Machine (AKDUOMAC421)
- With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
- Punch handles
- Punch Throat & Ruler
- Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
- Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
Part #: AKDUOMAC421 -
Akiles DuoMac 431 4:1 Coil and 3:1 Wire Binding Machine (AKDUOMAC431)
- With two independent punching die sets , this versatile & easy to use combo binder allows you to punch & bind multiple systems and or different pitches.
- Punch handles
- Punch Throat & Ruler
- Depth Margin Control: Provides the correct punch margin depth for each wire/comb size. Maximizes document tear resistance.
- Open Punching Throat & Continuous Punching Guide: For an easy alignment & punching of longer documents.
Part #: AKDUOMAC431 -
GBC WireBind 2:1 Square Hole MP2500ix Die Set (7704500)
- Type: GBC MP2500ix / Ibico 640ID Die Set
- Manufacturer: GBC (General Binding Corporation)
- Punching Pattern: GBC WireBind
- Pitch: 2:1 Pitch
- Hole Shape: Square
Part #: 7704500 -
Fletcher-Terry F-60 62" Semi-Rigid Flexible Substrate Cutter (04-722)
- Features a unique plastic knife blade cartridge allowing quick and safe blade changes.
- Cutting head equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
- Lock down pressure clamp - securely holds material in place while cutting ridge substrates.
- Table-top or wall-mounted cutting.
- Cutting head unit equipped with "Lock & Cut" feature - cutting head lowers and locks during cutting process.
Part #: 04-722 -
Challenge Paddy Wagon Heavy Duty Padding Press (CH-PADDYWAGON)
- High Capacity: Holds up to 31" of paper for production padding environments
- Simple 1-2-3 Operation: Ease of operations turns padding service into a value-added profit center.
- Tilt & Load: With the double doors locked, tilt the PADDY WAGON back. The 30 Degrees table slant allows gravity to do all the work of aligning stock and keeping it square. Load up to 15,000 8 1/2" x 11" sheets of 20# bond - even more with smaller sheets.
- Clamp: After loading is complete, aligned stacks are clamped in just seconds. Place the clamping bar on top or your paper, slide the self-locking, quick-release clamps down to the bar and tighten the screws.
- Tilt & Pad: Tilt the PADDY WAGON back to the upright position, lift the doors to unlock and swing them open for complete access to your padding surface.
Part #: CH-PADDYWAGON -
Akiles CoilMac ECI 4:1 Coil Binding Machine w/ Electric Inserter (COILMACECI41)
- Die Disengagement Pins: For a clean punch with multiple paper sizes.
- Punching Margin Control: Provides the correct punch-margin-depth for each coil size and maximizes the document's tear resistance.
- Open Punching Throat and Continuous Punching Guide: For an easy alignment and punching of longer documents.
- Side Margin Control: Provides an evenly centered punch for all document sizes.
- Electric Roller Inserter (Foot Pedal Operated): Allows the free use of both hands and grants the operator complete rotating control of the roller. Drastically reduces time and costs by making the inserting surprisingly fast and easy.
Part #: COILMACECI41 -
Tamerica 3:1 Wire and 4:1 Coil Punch Binding Machine (Opticombo-341)
- Manual Punch for 4:1 Coil & 3:1 Wire.
- Electric Coil Inserter via Foot Pedal Operation or switch.
- Wire Hanger & Closer.
- Punches up to 20 sheets per lift (20 lbs paper).
- 16.5" Punch Length with open throat.
Part #: Opticombo-341 -
SEAL 51" x 400' 4mil Print Shield Standard UV Matte Pressure-Sensitive Laminating Film (SPS62228)
- Premium-grade vinyl with an advanced water-based acrylic adhesive technology.
- Delivers reduced silvering and extended outdoor durability.
- Offers affordable protection against harmful UV rays, dirt and abrasion.
- Extend the life of your universal indoor applications for up to five years and outdoor applications for up to three years.
- Matte finish and comes with a single paper release liner.
Part #: SPS62228 -
Keencut Big Bench Xtra 53" Cutting Table Workstation (60928)
- Position or remove your Javelin Xtra cutter in seconds without using a single tool.
- Lift & hold levers allow a single operator to feed, align and cut materials with ease.
- Aluminum base-plate with metric parallel indents and cut groove.
- Full length Metric & Imperial scale.
- Full-length grip strip for clamping.
Part #: 60928 -
Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator (DTJM18)
- Max Laminating Width: 18.25 inches (464mm)
- Width: 25.5 inches (648mm)
- Depth: 11.75 inches (299mm)
- Height: 13 inches (330mm)
- Weight: 51 lbs (23 kg)
Part #: DTJM18 -
Baumfolder Lawson 52" MPU-52 Pacemaker III IV Blade (JH-39450)
- Compatible Models: Baumfolder, Lawson 52", MPU-52, Pacemaker III, Pacemaker IV
- Material: Standard Inlay
- Holes: 33
- Length: 64"
- With: 5"
Part #: JH-39450 -
Black 3/16" Foam Core Permanent Adhesive 40" x 60" Mounting Boards - 25pk (550463B)
- Board Type: Adhesive Coated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 40" x 60"
- Board Color: Black
- Quantity: 25 Per Box
Part #: 550463B -
Quartet 4' x 16' Porcelain Magnetic Classroom Whiteboard (QRT-PPA416)
- Porcelain whiteboard surface will not stain, ghost, scratch or dent
- Magnetic quality allows whiteboard to also be used as a magnetic bulletin board
- Designed for heavy use in busy educational environments
- Easy-to-clean writing surface requires minimal use of Quartet® cleaning solutions
- Cradle to CradleCM Silver certified porcelain, certified for material content, recyclability and sustainable manufacturing processes
Part #: QRT-PPA416 -
3mil Matte Low Melt Laminating Film - 25" x 2000' (3 Inch Core) (CBD3M252000-3)
- Film Type: Premium Low Melt
- Thickness: 3 Mil
- Roll Width: 25"
- Roll Length: 2000'
- Film Finish: Matte / Satin
Part #: CBD3M252000-3 -
Dahle Premium 21.5 Inch Heavy Duty Guillotine Cutter (567)
- Cuts up to 35 sheets of paper at a time
- Ground self-sharpening blade made of Solingen Steel
- Sturdy blade will not fly up or drop down unexpectantly
- Rotary guard covers the blade throughout the entire cutting process-The ultimate safety device
- Automatic paper clamp (models 561/565)
Part #: 567 -
Keencut 124" Simplex Sheet Material Cutter (60459)
- Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
- Fully equipped and ready to work with 100 medium duty blades included. Accepts standard utility blades.
- The lightweight extrusion design makes the Simplex an ideal general purpose cutter.
- Quick fit thread cap for easy accessory attachment.
- Blade locking thumb screw adds safety and convenience.
Part #: 60459 -
Cardinal HOLDit! 3 x 5 Index Card Pocket 2000pk - CB (CRD-21150)
- Color(s): Clear
- Quantity: 2000
- Size: 3" x 5"
- Orientation: Top Load
- Post-Consumer Recycled Content Percent : 0%
Part #: CRD-21150 -
Drytac Visual Magnetics POLYsatin 11mil 42" x 100' Magnetic Receptive Print Media (VMPSTN-42100)
- Premium satin print coating optimized for solvent, latex and UV-Cured print devices.
- Polypropylene base. Economical with quality "hand."
- Water/Smudge resistant print surface – Easy to clean.
- 100% opaque – No show through.
- Easy to install – No frames, wraps or stretching necessary.
Part #: VMPSTN-42100 -
MBM Triumph 1071 28.5" Tabletop Paper Cutter - KU0474 (MB-1071)
- Solingen steel blade set may be resharpened
- Transparent Lexan ® safety guard
- Solid hand clamp, independent of blade handle
- Precision side guides scaled in inches and metric system
- Lockable back gauge
Part #: MB-1071 -
Black 3/16" Foam Core 48" x 96" Mounting Boards - 25pk (550440)
- Board Type: Uncoated Foam Core Mounting Boards
- Board Thickness: 3/16"
- Board Size: 48" x 96"
- Board Color: Black
- Quantity: 25 Per Box
Part #: 550440 -
Drytac MediaShield Heatset Satinex UV 3mil 51" x 328' Overlaminate (SX51328)
- Film Width: 51"
- Film Length: 328'
- Film Thickness: 3.0mil
- Core Size: 3"
- Finish: Semi-Gloss
Part #: SX51328 -
Swingline ClassicCut CL800pro 11.75" Guillotine Paper Cutter (SWI-1500)
- Guillotine cutting of up to 150 sheets of 20 lb. paper at once; 11 3/4" cutting length
- Full-width handle for ultimate leverage
- Battery powered light illuminates cutting area to increase accuracy
- Limited 10-year warranty
- Cut Length: 11.75"
Part #: SWI-1500 -
Wilson Jones 2" Black Casebound 9.5" x 6" Ring Binders 12pk (W345-42)
- Binder Type: Casebound Ring Binder
- Ring Style: Standard Round Ring
- Manufacturer: Wilson Jones
- Number of Rings: 3 Heavy Duty
- Outside Centers: 7"
Part #: W345-42 -
Drytac MHA 51" x 328' Multi Heat Activated Mounting Adhesive (MHA51328)
- Film Width: 51"
- Film Length: 328'
- Core Size: 3"
- Filmic Carrier: None
- Adhesive Bond: Permanent:
Part #: MHA51328
