Product listing: Fujipla Clear ALM Laminator Roll Film - 1.5mil Matte 12.6" x 984' (DL-AM1U-15) - 2 Rolls (SAP38MATT) to Martin Yale 400 Tabletop Jogger (MY400)

Page
View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. Fujipla Clear ALM Laminator Roll Film - 1.5mil Matte 12.6" x 984' (DL-AM1U-15) - 2 Rolls (SAP38MATT)

    • Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP38MATT

    $464.27

  2. SEAL 38" x 200' 2mil Write Clear Gloss Pressure Sensitive Laminating Film (SW2082A)

    • 2mil glossy, pressure-sensitive polypropylene film.
    • Affords high washability.
    • Allowing you to turn virtually any image into a write-on/wipe-off chart or display.
    • Get 1 roll on every order.
    • Roll Width: 38"
    Part #: SW2082A

    $466.69

  3. 1-3/8" Black 4:1 Metal Spiral Coil Binding Spines - 100pk (MYMSC138BK)

    • Color: Black
    • Material: Nylon Coated Steel
    • Diameter Size: 1-3/8"
    • Pitch: 4:1
    • Capacity: 310 Sheets (20# Bond)
    Part #: MYMSC138BK

    $469.09

  4. Quartet 4' x 10' Porcelain Magnetic Classroom Whiteboard (QRT-PPA410)

    • Porcelain whiteboard surface will not stain, ghost, scratch or dent
    • Magnetic quality allows whiteboard to also be used as a magnetic bulletin board
    • Designed for heavy use in busy educational environments
    • Easy-to-clean writing surface requires minimal use of Quartet® cleaning solutions
    • Cradle to CradleCM Silver certified porcelain, certified for material content, recyclability and sustainable manufacturing processes
    Part #: QRT-PPA410

    $470.29

  5. Luxor Black 30 Tablet and Laptop Computer Charging Cart (LLTM30-B)

    • Meets ANSI/BIFMA standards.
    • Safely stores, charges, and transports up to 30 tablets, Chromebooks, or small laptops.
    • Ideal for businesses, hospitals, and schools with large classes.
    • Flexible dividers adjust to perfectly fit each device.
    • Bottom shelf creates additional storage.
    Part #: LLTM30-B

    $473.39

  6. Clear 29" x 43" Print Protector Display Sleeve - 25pk (TPHX29X43)

    • Size: 29" x 43"
    • Opening: 29" Side (Opening is 1/8" Larger for Easy Insertion)
    • Part Number: TPHX29X43
    • Quantity: 25 Per Box
    • Size: 29" x 43"
    Part #: TPHX29X43

    $475.79

  7. Fellowes Galaxy E Electric Plastic Comb Binding Machine (5218301)

    • Effortless electric operation - just push the button to punch!
    • Punches up to 25 sheets at a time with a minimum of effort.
    • Binds up to 425 sheets with a 2" comb
    • Removable binding mechanism can be used separately for increased productivity.
    • Releasable dies for different document sizes.
    Part #: 5218301

    $476.11

  8. Luxor 56" Teak Pneumatic Adjustable-Height Standing Desk (SPN56F-BK/TK)

    • Lever-activated pneumatic air cylinder easily adjusts height anywhere between 27.5" and 44.5".
    • Raises and lowers up to 150 lbs., easily housing a CPU, monitors and other office accessories.
    • Sturdy, scratch-resistant desktop with a teak finish.
    • Constructed with two sturdy steel legs, each reinforced with durable inner legs.
    • Chamfered edges keep forearms comfortable while typing and working.
    Part #: SPN56F-BK/TK

    $476.25

  9. HSM Signature Series DuraFlex Shred Console - Maple (HSM36DFMA23)

    • Anti-phishing paper deflector and self-closing lock ensure documents remain secure at all times.
    • Available in 3 attractive colors to complement your office decor.
    • Ergonomic Rigid Insert offers lightweight design and power grips on both ends to allow for easy emptying. Balanced grip allows for easier handling than traditional console bag.
    • Modular base protects carpets and console from damage, slides easily on car pet.
    • Only ergonomic design verified as preferred for usability by third party study from Humantech.
    Part #: HSM36DFMA23

    $476.29

  10. Quartet 48" Double Sided Black Garment Rack (QRT-20314)

    • Freestanding garment rack is double-sided and includes a top shelf
    • Great for high capacity storage needs in public spaces, meeting rooms or office lobbies
    • 48"W x 61.5"H
    • Neatly holds up to 64 hangers (sold separately)
    • Perforated top shelf provides additional storage
    Part #: QRT-20314

    $477.29

  11. Swingline Ingento 30" x 30" Maple Guillotine Cutter (SWI-1172)

    • Guillotine cutting of up to 15 sheets at once; 30" cutting length
    • Steel tension spring keeps guillotine blade arm in place during active use
    • Alignment grid and dual scale ruler for precise measuring
    • Protective guard rail safety feature plus blade latch hook to lock blade while in storage
    • Limited 10-year warranty
    Part #: SWI-1172

    $478.09

  12. Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2251L150

    $479.51

  13. Mactac Permacolor ColorTrans CT2200 Series Optically Clear Perm/Rem Mounting Films (MACTAC-CT22)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: MACTAC-CT22

    $479.51

  14. Quartet Infinity Glass 8' x 4' White Magnetic Frameless Dry-Erase Board (QRT-G9648W)

    • Tempered dry-erase marker board with 15 year warranty will not stain, ghost, scratch or dent
    • Ideal for heavy use in spaces with moderate traffic
    • Magnetic quality allows secure hanging of papers from glass surface with rare earth magnets
    • Frameless board design blends seamlessly into any environment
    • White colored glass board surface clearly displays any color dry-erase ink
    Part #: QRT-G9648W

    $481.79

  15. Scotch 12 Inch Professional Cold Laminating Machine (LS1000VAD)

    • Maximum Document Size: 12" Wide
    • Maximum Document Thickness: 9.2 mil
    • Adjustability Features: Laminate 2 Sides, Or 1 Side W/Permanent Adhesive On Other
    • Electric/Manual/Battery: Manual
    • For Use With: Laminate Artwork;Laminate Banners;Laminate Maps;Laminate Menus;Laminate Signs
    Part #: LS1000VAD

    $482.79

  16. Lassco Wizer Cornerounder CR-177 Corner Cutter with 1/4" and 3/8" Die & Blades (CR-177A)

    • Designed to handle paper and plastic products
    • Long handle and 5" wide grip for added leverage and comfort
    • Can handle up to a 1" stack of product
    • 15" x 15" Table Size
    • Improved with a new Alignment Guide for quick set up and adjustment
    Part #: CR-177A

    $484.79

  17. Black 1/2" Gator Foam 40" x 60" Mounting Boards - 3pk (SGP-BG4060-3)

    • Board Type: Gator Foam Mounting Boards (Uncoated)
    • Board Thickness: 1/2"
    • Board Size: 40" x 60"
    • Board Color: Black
    • Quantity: 3 Per Box
    Part #: SGP-BG4060-3

    $485.19

  18. GBC Octiva Clear Gloss 3mil 61" x 500' (3" Core) (3020597)

    • Film Type: GBC Octiva Gloss
    • Thickness: 3mil
    • Roll Width: 61"
    • Roll Length: 500'
    • Film Finish: Gloss
    Part #: 3020597

    $485.39

  19. Keencut 60" Table Edge Rotary Cutter (TE) - ARCTE150 (60631)

    • Keencut cutters are the most accurate on the market
    • Guaranteed 1.0mm straightness over the full length of the cut
    • Specifically designed for cutting paper and film
    • Precision scissor cutting action for a professional finish on delicate materials
    • Unobstructed view of cut line
    Part #: 60631

    $485.55

  20. Quartet InvisaMount 85" x 48" Magnetic Glass Dry-Erase Board (QRT-G8548IMW)

    • Tempered glass surface dry-erase board is stain and ghost resistant to ensure clean erasability and top notch durability
    • Glass is magnetic and offers a smooth writing surface. Use with dry-erase makers and rare earth magnets to write messages and post papers.
    • Frameless design fits in seamlessly with modern office space decor, and allows boards to be lined up side-by-side for an extended writing platform
    • 85" x 48" board size is wide format to match 16:9 aspect ratio projection screens and televisions
    • Writing in all colors is easily visible on the white glass board surface and glass is easy to keep clean with Quartet whiteboard cleaning supplies
    Part #: QRT-G8548IMW

    $485.69

  21. GBC Smartcut S618pro 18" Rotary Trimmer (1690040)

    • Replacement Blades: 1690060
    • Model Number: GBC SmartCut S618pro
    • Length: 18 ”
    • Warranty: 1 Year
    • GBC Part Number: 1690040 , G1690040
    Part #: 1690040

    $485.99

  22. Drytac Clear MHA 38" x 328' Multi Heat Activated Mounting Adhesive (MHA38328)

    • Film Width: 38"
    • Film Length: 328'
    • Core Size: 3"
    • Filmic Carrier: None
    • Adhesive Bond: Permanent:
    Part #: MHA38328

    $487.39

  23. MBM Side Tables for Triumph 4815, 4850, 4860, 5255, 5260, 6655, and 6660 Paper Cutters (CU0495)

    • Compatible Cutters: Triumph 4815 , 4850 , 4860, 5255 , 5260 , 6655 , and 6660 Paper Cutters
    • Width: 32"
    • Part Number: CU0495
    • Increase work surface
    • Compatible Cutters: Triumph 4815, 4850, 4860, 5255, 5260, 6655, and 6660 Paper Cutters
    Part #: CU0495

    $489.00

  24. Drytac Clear MHA 41" x 328' Multi Heat Activated Mounting Adhesive (MHA41328)

    • Film Width: 41"
    • Film Length: 328'
    • Core Size: 3"
    • Filmic Carrier: None
    • Adhesive Bond: Permanent:
    Part #: MHA41328

    $490.79

  25. GBC / Swingline CombBind C210e Electric Comb Binding Machine (7708175)

    • 330 sheet binding capacity.
    • 20 sheet punch capacity.
    • For letter size documents.
    • Accommodates oversize covers.
    • 1 1/2" maximum comb spine size.
    Part #: 7708175

    $491.79

  26. Drytac Clear Trimount 51" x 300' Dry Mounting Tissue (Roll) (TR51300)

    • Size: 51" x 300
    • Carrier: Paper/off-white
    • Adhesive Bond: Permanent
    • Adhesive Base: Solvent acrylic
    • Initial Tack: None
    Part #: TR51300

    $492.99

  27. Quartet Blue 6-Panel Exhibition Display System (QRT-VSB93516Q)

    • Easy to set up, remove from included carry bag, stack and lock panels into place
    • Panels are gray on one side and blue on other to complement any environment
    • Accepts latch and key fasteners, tape, tacks or push-pins to attach display materials
    • Perfect for trade shows, lobbies, professional offices or schools
    • 6-panel system can be used as an easy-to-view floor display
    Part #: QRT-VSB93516Q

    $493.79

  28. GBC Octiva Clear LM Textured Satin 5mil 38" x 250' (9301583)

    • Film Type: GBC Octiva Lo-Melt Textured Satin
    • Thickness: 5mil
    • Roll Width: 38"
    • Roll Length: 250'
    • Film Finish: Textured Satin
    Part #: 9301583

    $494.09

  29. Logan F602 Frame Shop in a Box (LOGAN-F602)

    • Framing kit for artists, photographers and home framers
    • Allow you to cut, sand, join and finish your own wood moulding frames in a professional way
    • Save you money over having it done professionally
    • Included in the kit:
    • F100-5 Saw Fence Kit-To be adapted to most 7 1/4" to 10" (19 cm to 26 cm) power miter saws. (saw not included)
    Part #: LOGAN-F602

    $494.74

  30. Martin Yale 400 Tabletop Jogger (MY400)

    • Helps eliminate static electricity and paper sticking, for easier processing
    • Great companion for high speed copiers, folding machines, printing presses, cutters and perforators
    • Jogs a ream of 8 1/2" x 11" or a half of a ream of 8 1/2" x 14"
    • Dimensions: 15.25" x 11.5" x 15.25"
    • Weight: 20 lbs.
    Part #: MY400

    $494.78

Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80