Product listing: James Burn Table-Top Electric Automatic Coil Inserter and Crimper (KOILMATIC) to Morgana RDC Rotary Die Cutter (MOR-RDC)

View by: Our Choices  |  Best Seller  |  Title (A-Z)  |  Title (Z-A)  |  Popularity  |  All-Round Favorites  |  Price (High-to-Low)  |  Price (Low-to-High)
  1. James Burn Table-Top Electric Automatic Coil Inserter and Crimper (KOILMATIC)

    • Comes Complete: - Set of 13 Spine Formers. - Photo Instruction Manual & Training DVD.
    • Productivity. Up to 450 books/hour
    • Coil Capabilities. 8 mm to 20 mm (1/8" to 5/8" book thickness)
    • Binding Edge Capabilities. 8.5" / 11" / A5 / A4.
    • Troubleshooting. Onboard electronic diagnostic capabilities.
    Part #: KOILMATIC


  2. Royal Sovereign Rollover Flexi 61" x 132" Flatbed Applicator for Mounting and Laminating (10315)

    • Key Features:
    • Comprising all the essential qualities of the existing line of Rollover Classic Flatbed Applicators
    • Offers quick dismantling to facilitate entering of premises having difficult access.
    • Having no overhead gantry above the roller, the access to media and substrates while working is superior.
    • Ideal for rigid panel application and laminating digital prints.
    Part #: 10315


  3. Proton T-4 Automatic Hard Drive and Magnetic Media Degausser (PROTONT-4IG)

    • Listed on the National Security Agency’s Evaluated Products List (NSA EPL-Degausser) and complies with DoD requirements for destroying classified information on magnetic media.
    • Internal software requires all parameters (capacitor voltage, switch, etc.) are present prior to the “Go” LED display. If any problem exists that will compromise degaussing, the “Go” LED will not display. This software guarantees that each degauss cycle delivers sufficient strength and consistent performance.
    • Patented “Reverse Polarity” Electro Magnetic Pulse (EMP) technology.
    • Fully automatic operation: no drawer to open and close, simply insert media into top slot and push start button.
    • Lightweight and portable design enables table top or floor operation.
    Part #: PROTONT-4IG


  4. Proton 104 Multimedia Shredder (PDS-104)

    • Allows compliance with recognized security standards and regulations, including NIST, HIPAA, FACTA, PCI DSS, GLBA, PIPEDA, IRS, GDPR, etc.
    • Can be used to deform hard drive platters to NSA standards per NSAEPL for Hard Drive Destroyers.
    • Hardened, solid-steel cutting rollers for performance and durability.
    • Energy efficient; low-power energy savings mode after five (5) minutes of idle running.
    • Specific function modes for various types of materials and throughput.
    Part #: PDS-104


  5. Formax FD 2200-15 Data Integrity Scanning System (FD-2200-15)

    • Single-camera system for Output Scanning on tabletop inserters or pressure sealers.
    • Integrity and productivity reporting.
    • Sequence check (incrementing or decrementing).
    • Rated Speed: up to 40,000 items per hour.
    • Report of all codes read.
    Part #: FD-2200-15


  6. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497


  7. Ledco Digital 44" Dual Hot Roll Laminator & Mounter (4400200P)

    • Quality silicone rubber laminating rollers release materials easily and maintain their flexibility for a good edge seal.
    • Two sets of rollers keep the film flat and tight while heat laminating so that the automatic fans cool and set the adhesive. When thermal films cool in a slack state, the surface of the lamination is wavy and rippled.
    • Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
    • Variable speed allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds.
    • Independent temperature controls for top and bottom heaters allow the use of different materials on front and back of an image.
    Part #: 4400200P


  8. Formax High-Speed Digital Color Printer with 3' Conveyor Stacker (ColorMax8C)

    • Operating Features:
    • 7" Color Touchscreen: Intuitive control panel interface with image preview, system status, and access to common functions and settings.
    • Fast Processing: Prints up to 8,000 #10 envelopes per hour.
    • Addressing and Variable Data: Letterhead, invitations, window/non-window envelopes, invoices, postage, barcodes and more.
    • Accommodates Media Up to 3/8" Thick: Wide, flat paper path handles stuffed envelopes, 10x13 flats, chipboard, corrugated cardboard, cartons, padded envelopes, pharmaceutical pill packs, and more.
    Part #: ColorMax8C


  9. Spiel Sterling Wiremaster Semi-Automatic Double Loop Wire Binding Machine (WM-SEMI)

    • Economical solution for wire binding.
    • Capable of binding books at the brisk pace of 1,200 per hour.
    • It changes over in about five minutes.
    • The operator hangs the book on the wire and the Wiremaster Semi delivers the book to the closing station, and then to the delivery conveyor.
    • Can bind up to 4 skips.
    Part #: WM-SEMI


  10. Graphtec 47.2" x 36" Flatbed Vinyl Cutter and Plotter (FCX2000-120VC)

    • Stronger Media Hold Down. Distance between the holes has been improved from 30 mm on FC2250 Series to 20 mm on FCX2000 Series, as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
    • Improved Vacuum Suction! holds media with the use of external electric vacuum pump. This is the preferred method for heavier and thicker media. The Redesigned Cutting Table has increased hold-down capability by its increased number of vacuum holes. This redesign is significantly valuable when cutting smaller objects that have less of surface area.
    • Dual tool holder with 500 gf on tool 1 and 1,000 gf on tool 2
    • Provided tools suitable for many applications.
    • The FCX2000 series has 2 tool holder in the carriage.
    Part #: FCX2000-120VC


  11. Standard Horizon BQ-160 PUR Single-Clamp Perfect Binder (BQ-160PUR)

    • Suitable to produce personalized photo book production such as wedding albums and travel albums.
    • Perfect binding, tape binding and lining binding (for case binding) can be performed.
    • Up to 40mm thickness of book can be produced.
    • Optional CRB-160 impact creaser can be on-line to prepare creased (up to 8 line) cover.
    • Optional VS-160 fume extractor is available for clean operation.
    Part #: BQ-160PUR


  12. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494


  13. Plastikoil PBS 3000 QS Automatic Coil Inserter and Crimper (PBS-3000QS)

    • Comes Complete: - Set of 15 Spine Formers - Tool Kit - Photo Instruction Manual & Instructional DVD
    • Productivity. - As high as 600 books/hour (Available in .2475" OR 4:1 OR 6 mm Pitch) - For diameters from 6 mm to 20 mm
    • Recommended Wider 3:1 OR 2.5:1 Pitch For larger diameters up to 30 mm
    • Coil Capabilities. - 6 mm through 20 mm - Up to 30 mm in wider pitch options
    • Available Formats. - 12"/A4 model (Binding edges from 5" to 12"/12.7 to 30.5 cm) - 17"/A3 model (Binding edges from 5" to 17"/12.7 to 43 cm)
    Part #: PBS-3000QS


  14. Formax Multi-Function Slitter-Cutter-Creaser (Atlas-TRIO15)

    • High-Speed Cutting/Slitting: Up to eight 12" x 18" sheets per minute (24-up business cards)
    • High-Speed Creasing: Up to 5,000 letter-size sheets per hour
    • Powerful Feed System: Upper belt tri-suction feeding accurately handles large and heavy stocks
    • 4" Color Touchscreen: Program and make adjustments easily with graphics-based menus and three modes - preset, manual and custom/flex
    • Pre-Set and Programmable Jobs: Up to 150 custom jobs can be saved for quick recall
    Part #: Atlas-TRIO15


  15. Count AccuCreaser Air Modular Digital Creasing Machine w/ KF200 Knife Folder (ACTREG/KF200)

    • Count AccuCreaser Details:
    • Provides modes for creasing, perforating or feeding.
    • Bottom vacuum feed with sheet spacing control.
    • CAM actuated compression creasing ensures maximum crease accuracy.
    • Automated distance recognition allows auto setups for your most common creases and corresponding folds, including perfect bind.
    Part #: ACTREG/KF200


  16. Vivid Matrix 13" Pneumatic Single Sided Roll Laminator (MX-370P)

    • Pneumatic pressure.
    • Retrofits to existing models.
    • Easy-to-use control panel.
    • Anti-curl technology.
    • Semi-automatic feed.
    Part #: MX-370P


  17. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC


  18. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X


  19. Formax Atlas C300 High-Speed Automatic Creaser and Folder (Atlas-C300)

    • Color touchscreen control panel.
    • Fully automatic setup.
    • Processes up to 6,000 sheets per hour.
    • Handles sheets up to 27.5" x 15.1".
    • Contoured floating knives prevent marking of digital prints.
    Part #: Atlas-C300


  20. Graphic Whizard Wizard PT 335 SCC Multi Slitter/Cutter/Creaser (PT335SCC)

    • 4" deep pile feeder.
    • Multi accessory output.
    • 9" colour touchscreen.
    • Interchangeable crease/ perf dies.
    • Built in job creator.
    Part #: PT335SCC


  21. Intimus HDD Gladiator Hard Drive Shredder (Gladiator-HDD)

    • Shreds HDD and SSD drives as well as various other form of media, like CDs, DVDs, Blu-Ray disk, VHS, DLT tapes, Cell Phones, etc.
    • Automatic reverse when overloading.
    • Split Shredding Chamber for Multi Media optimization.
    • High Performance shredder for optical and magnetic media.
    • Continuous manual material feed.
    Part #: Gladiator-HDD


  22. Morgana DigiFold Pro 385 High Speed Automatic Creaser and Folder with Deep Pile Feeder (DigiFold-Pro-385)

    • Crease and fold sheets up to 0.02" without cracking.
    • Intuitive SmartScreen touch screen control.
    • Suction fed top feeder.
    • Deep pile 17.72" capacity feeder.
    • SmartStep table drop.
    Part #: DigiFold-Pro-385


  23. Truline Preferred Pack 2 Belt Fully Automatic Side Sealer (Int-30)

    • Touch screen automatically adjusts side seal, inverting head and infeed conveyor.
    • Option 3' or 6' flighted or belted infeed conveyors.
    • Front load film cradle with adjustable pin-perf wheels.
    • No mantaince side seal, seals virtually all films.
    • Seal Area: 30" Cross Seal x 8"H
    Part #: Int-30


  24. Truline Preferred Pack Right Angle Fully Automatic Sleeve Wrapper with Attached Tunnel (SFE-1100AU)

    • Speed: 5 to 15 PPM (Depending on product size and film thickness.)
    • Electrical: 220 Volt, 3 Phase, 60 Amp
    • Seal Size: 41 3/4"
    • Max Roll Width: 39"
    • Max Package Length: 19.5"
    Part #: SFE-1100AU


  25. SEAL 65 Pro MD 65" Wide Format Roll Laminator (SEAL-65ProMD)

    • Dual IR Quartz heated rollers capable of running both hot and cold films.
    • 65" working width to handle a wide range of media.
    • Maximum operating speed of 15’/minute.
    • 2" nip with precision pneumatic rollers for even speed and pressure to ensure smooth, wrinkle-free graphics.
    • Bi-directional operation allows for efficient operating.
    Part #: SEAL-65ProMD


  26. HSM SP 5080 Level 3 Shredder Baler Combination (HSM-365520)

    • Optimized cutting device technology destroys 500-550 sheets of paper, creating 150 particles per page;
    • Compresses 4-9 bales per hour.
    • Also shreds staples, paper clips, credit/store cards, CDs/DVDs, floppy disks, and USB sticks.
    • Obliterates large quantities such as archives and bulk storage.
    • Material feed via electronic conveyor belt.
    Part #: HSM-365520


  27. Formax 7500 Series High-Volume Folder and Inserter (FD7500)

    • Operating Features:
    • Modular Design: Flexibility to add feeders, up to 11 feed stations.
    • Intuitive User Interface: Widescreen color touchscreen control.
    • Quick and Easy Setup: Automatic job setup with document & envelope library.
    • Programmable Jobs: Unlimited.
    Part #: FD7500


  28. Tec Lighting MegaCoat XL 63" Wide Format UV Coater (MC6063-2)

    • Precise coating up to 63" wide
    • Process speed to 70 fpm.
    • UV process ready indicator.
    • Digital speed controls ensure repeatable performance.
    • Advanced curing unit design features parabolic reflector and short run out engineering.
    Part #: MC6063-2


  29. Royal Sovereign 67" Calender Heat Transfer System With 22" Oil Drum (RHPO-1855)

    • Extra-long self-contained oil heated drum to ensure complete heat distribution and coverage.
    • Finely tuned sensors to ensure consistent temperatures throughout the transfer process.
    • Universal core adapters and shaft-less unwinding technology.
    • Images are permanent and do not peel or fade.
    • Bonding of the dye to the synthetic fibers creates extraordinarily vivid colors.
    Part #: RHPO-1855


  30. Morgana RDC Rotary Die Cutter (MOR-RDC)

    • Die cut, kiss cut, score and perforate in one pass.
    • Flexible dies for custom shaped products.
    • 4,500 sheets per Hour.
    • Top sheet, air suction, deep pile feeder.
    • Simple and quick die changeover.
    Part #: MOR-RDC


Items 1-15 of 22

Display Type List Grid
Page:   1   10   20   30   40   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80