3:1 Wire Bind Punch Pattern

Page
  1. GBC MP2000W3 Modular Series 3:1 Fixed Die Wire Binding Punch (7706050)

    • Punches the 3:1 Twin Loop pattern for documents from 1/4" to 9/16" thick (125 sheets).
    • The ergonomic vertical punch throat speeds up productivity and prevents mispunches.
    • Choose your preferred punching method from a palm switch or hands-free foot pedal.
    • Auto-reverse prevents downtime due to punching too much paper.
    • Adjustable edge guide allows for easy alignment of paper and covers.
    Part #: 7706050

    $1594.00

  2. Akiles Electric Modular Interchangeable Die Binding Punch (FLEXIPUNCH-E)

    • High Volume Punching Capacity : The heavy duty electric punching mechanism can handle up to twenty sheets of 20lb paper per cycle. Plus, the FlexiPunch-E offers a foot pedal control that allows for two handed punching.
    • Heavy-Duty Punching Motor: The FlexiPunch-E offers a heavy duty commercial quality electric punching motor that provides more than enough punch power for all die sets and punching patterns.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : Allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    Part #: FLEXIPUNCH-E

    $1499.00

  3. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $440.99

  4. Akiles FlexiPunch-M 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DM)

    • Type: Akiles FlexiPunch-M Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DM

    $235.00

  5. Akiles FlexiPunch-E 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DE)

    • Type: Akiles FlexiPunch-E Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DE

    $235.00

  6. Rhin-O-Tuff 3:1 Wire Square 36-Hole Die Set For Tornado Autopunch EX (T1136)

    • Recommended Paper Sizes: All STD Sizes
    • Punching Pattern: 3:1 Wire Square Hole, 36-Holes
    • Pitch: .3333" Pitch (Center-to-Center Hole Spacing)
    • Hole Size: .156"
    • Edge Margin: .179"
    Part #: T1136

    $2495.00

  7. Rhin-O-Tuff 3:1 Wire Round 36-Hole Die Set For Tornado Autopunch EX (T1736)

    • Recommended Paper Sizes: All STD Sizes
    • Punching Pattern: 3:1 Wire Round Hole, 36-Holes
    • Pitch: .3333" Pitch (Center-to-Center Hole Spacing)
    • Hole Diameter: .171"
    • Edge Margin: .168"
    Part #: T1736

    $1995.00

  8. Manual 3:1 Pitch Wire Binding Machine (MINIWIRE)

    • Punches 3:1 pitch 32 pin square hole pattern.
    • Punches up to 8-10 sheets of 20lb paper.
    • Quality construction compact design.
    • Manual punch for wire binding.
    • Crimper incorporated into machine.
    Part #: MINIWIRE

    $114.95

  9. GBC Magnapunch Pro Wire Calendar 3:1 Square Hole Die Set (4401994)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square punch pattern with half-circle cut out in center 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Square punch pattern with half-circle cut out in center. Wire.
    Part #: 4401994

    $711.56

  10. GBC Magnapunch Pro WireBind 3:1 Square Hole Die Set (7705645)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Square punch pattern; required for spine up to 9/16".
    Part #: 7705645

    $768.57

  11. GBC Magnapunch Pro WireBind 3:1 Round Hole Die Set (7705647)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a round 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 34 sheets at a time with a 14 maximum document width.
    • Round punch pattern; required for spine up to 9/16".
    Part #: 7705647

    $711.56

  12. Tamerica 4-in-1 Electric Punch and Manual Binder (VERSABIND-Ei)

    • Plastic Comb Plastic Coil (4:1) and Wire (3:1 and 2:1) Electric Punch and Manual Binding Machine.
    • Fully disengageable pins for all die systems for custom punch patterns.
    • Margin depth control for different binding thicknesses.
    • Side margin control allows easy punch centering.
    • Foot pedal punch control.
    Part #: VERSABIND-Ei

    $2359.00

  13. Performance Office Papers 24lb Pre Punched 3:1 Twin Wire 32-Hole 8.5" X 11" Paper - Case (POP81471)

    • Color: White
    • Size: 8.5" x 11"
    • Paper Thickness: 24lb
    • Hole Pattern 3:1 Twin Wire 32-Hole (along left side)
    • Hole Size: 4mm x 4mm (square holes)
    Part #: POP81471

    $94.27

  14. James Burn EX380 / EPX700 3:1 Round Hole Wire Die Set (04JBEX38031R)

    • Type: EX380 / EPX700 Interchangeable Die Set
    • Punching Pattern: 3:1 Pitch Wire
    • Hole Shape: Round
    • Hole Size: 4mm
    • Usage: For Wire-O documents from 1/8" to 1/2"
    Part #: 04JBEX38031R

    $2900.00

  15. James Burn EX380 / EPX700 3:1 Square Hole Wire Die Set (04JBEX3831SQ)

    • Type: EX380 / EPX700 Interchangeable Die Set
    • Punching Pattern: 3:1 Pitch Wire
    • Hole Shape: Square
    • Hole Size: 4mm
    • Usage: For Wire-O documents from 1/8" to 1/2"
    Part #: 04JBEX3831SQ

    $3500.00

  16. James Burn EX380 / EPX700 3:1 Square Hole Wire Die Set w/ Thumbcut (04JBEX3831ST)

    • Type: EX380 / EPX700 Interchangeable Die Set
    • Punching Pattern: 3:1 Pitch Wire
    • Hole Shape: Square
    • Hole Size: 4mm
    • Usage: For Wire-O documents from 1/8" to 1/2"
    Part #: 04JBEX3831ST

    $4000.00

  17. James Burn EX610 / EPX700 3:1 Round Hole Wire Die Set (04JBEX61031R)

    • Type: EX610 / EPX700 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Round
    • Hole Size: 4mm
    • Part Number: 04JBEX61031R
    Part #: 04JBEX61031R

    $3400.00

  18. James Burn EX610 / EPX700 3:1 Square Hole Wire Die Set (04JBEX61031S)

    • Type: EX610 / EPX700 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Square
    • Hole Size: 4mm
    • Part Number: 04JBEX61031S
    Part #: 04JBEX61031S

    $4800.00

  19. James Burn EX610 / EPX700 3:1 Square Hole Wire Die Set w/ Thumbcut (04JBEX61031ST)

    • Type: EX610 / EPX700 Interchangeable Die Set
    • Punching Pattern : 3:1 Pitch
    • Hole Shape: Square
    • Hole Size: 4mm
    • Part Number: 04JBEX61031ST
    Part #: 04JBEX61031ST

    $5500.00

Items 1-15 of 22

Display Type List Grid

Related Categories