Aamstamp Stamping Machines

Page
  1. Aamstamp AIR-2000 Hot Foil Stamping Machine (AAM-AIR-2000)

    • AAmstamp AIR-2000 automates your printing with a half ton (1,000 lbs.) of printing pressure.
    • Digital Heat Controller for 1 degree controls 550w heater.
    • Fast and convenient foil loading.
    • Easy disposal of used foil through rear of the machine.
    • Foot switch operated.
    Part #: AAM-AIR-2000

    $3250.00

  2. Aamstamp M-2000 Electric Hot Foil Stamping Machine (AAM-M-2000)

    • Digital Heat Controller: holds temp. at + or - 1 degree.
    • Larger print area due to larger rambar.
    • Convenient foil loading.
    • Easy disposal of used foil through rear of the machine.
    • User friendly accessories: all machined to aerospace tolerances.
    Part #: AAM-M-2000

    $2070.00

  3. Aamstamp Sprite Stamping Machine (AAM-Sprite)

    • User friendly accessories: all machined to aerospace tolerances.
    • All 100% made in the U.S.A.
    • Fully warranted for 1 year.
    • 6" print width: every line can be up to 6".
    • Capable of printing full 2.5" x 6" area.
    Part #: AAM-Sprite

    $1160.00

  4. Aamstamp TITAN-2000 Stamping Machine (AAM-TITAN-2000)

    • Foot switch operated.
    • Dual OSHA Photo-Optic hand switches available.
    • Fast and convenient foil loading.
    • Easy disposal of used foil through rear of the machine.
    • Counter option available.
    Part #: AAM-TITAN-2000

    $4390.00

  5. Aamstamp Album Master Stamping Machine (AAM-Album-Master)

    • Adjustable Head Height: This machine can imprint on any product form 0" to 10" tall.
    • Extra Large 14" X 14" table plate has 8" of fine line adjustment in and out.
    • It also has a 7" total left or right adjustment to make product positioning accurate and easy.
    • The Album Master gauge bar with adjustable side stop will locate product left or right up to 17 1/2" from center.
    • Digital Temperature Control holds temperature ±1°.
    Part #: AAM-Album-Master

    $3150.00

  6. Aamstamp Soft Cushion Board (AAM-CB-SOFT)

    • Product Type: Cushion Board
    • Compatible With: Aamstamp Stamping Machines
    • Board Type: Soft (More than Four Lines)
    • Part Number: AAM-CB-SOFT
    • Product Type: Cushion Board
    Part #: AAM-CB-SOFT

    $10.95

  7. Aamstamp Medium Cushion Board (AAM-CB-MED)

    • Product Type: Cushion Board
    • Compatible With: Aamstamp Stamping Machines
    • Board Type: Medium (One to Four Lines)
    • Part Number: AAM-CB-MED
    • Product Type: Cushion Board
    Part #: AAM-CB-MED

    $10.95

  8. Aamstamp Hard Cushion Board (AAM-CB-HARD)

    • Product Type: Cushion Board
    • Compatible With: Aamstamp Stamping Machines
    • Board Type: Hard (One or Two Small Lines)
    • Part Number: AAM-CB-HARD
    • Product Type: Cushion Board
    Part #: AAM-CB-HARD

    $10.95

  9. Aamstamp Cushion Boards - Full Set (AAM-CB-FULL)

    • Product Type: Cushion Board
    • Compatible With: Aamstamp Stamping Machines
    • Board Type: Soft, Medium or Hard
    • Part Number: AAM-CB
    • Product Type: Cushion Board
    Part #: AAM-CB-FULL

    $30.00

  10. Aamstamp 5 3/8" Holding Pad (AAM-HP-538)

    • Product Type: Holding Pad
    • Compatible With: Aamstamp Stamping Machines
    • Size: 5 3/8"
    • Part Number: AAM-HP-538
    • Product Type: Holding Pad
    Part #: AAM-HP-538

    $5.00

  11. Aamstamp 9" x 11" Wooden Type Box (AAM-ATB-1)

    • Product Type: Type Box
    • Compatible With: Aamstamp Stamping Machines
    • Size: 9" x 11"
    • Compartments: 36
    • Part Number: AAM-ATB-1
    Part #: AAM-ATB-1

    $40.00

  12. Aamstamp 14.5" x 14.5" Large Deluxe Wooden Type Box (AAM-LTB-1)

    • Product Type: Type Box
    • Compatible With: Aamstamp Stamping Machines
    • Size: 14.5" x 14.5"
    • Compartments: 64
    • Part Number: AAM-LTB-1
    Part #: AAM-LTB-1

    $57.50

  13. Aamstamp 10" x 12" Work Table (AAM-WT)

    • Product Type: Work Table
    • Compatible With: Aamstamp Stamping Machines
    • Size: 10" x 12"
    • Adjustable Side Guide: Yes
    • Part Number: AAM-WT
    Part #: AAM-WT

    $165.00

  14. Aamstamp Multi-Purpose Gauge Bar (AAM-MPGB)

    • Product Type: Gauge Bar
    • Compatible With: Aamstamp Stamping Machines
    • Adjustable Side Guide: Yes
    • Part Number: AAM-MPGB
    • Product Type: Gauge Bar
    Part #: AAM-MPGB

    $95.00

  15. Aamstamp Two Hand Safety Switch (AAM-THSS)

    • Product Type: Two Hand Safety Switch
    • Compatible With: Aamstamp Stamping Machines
    • Part Number: AAM-THSS
    • Product Type: Two Hand Safety Switch
    • Prevent hands from entering pinch point.
    Part #: AAM-THSS

    $225.00

  16. Aamstamp 5" Self Centering Type Holder (AAM-SCTH-5)

    • Product Type: Self Centering Type Holder
    • Compatible With: Aamstamp Stamping Machines
    • One Line Capacity: up to 36 point type
    • Type Capacity: up to 5 inches in length
    • Part Number: AAM-SCTH-5
    Part #: AAM-SCTH-5

    $165.00

  17. Aamstamp 1" x 5" Open Chase Holder (AAM-AOC1x5)

    • Product Type: Die Holder
    • Compatible With: Aamstamp Stamping Machines
    • Size: 1" x 5"
    • Material: Solid one piece
    • Part Number: AAM-AOC1x5
    Part #: AAM-AOC1x5

    $95.00

  18. Aamstamp 1.5" x 5" Open Chase Holder (AAM-AOC1.5x5)

    • Product Type: Die Holder
    • Compatible With: Aamstamp Stamping Machines
    • Size: 1.5" x 5"
    • Material: Solid one piece
    • Part Number: AAM-AOC1.5x5
    Part #: AAM-AOC1.5x5

    $110.00

  19. Aamstamp 2.5" x 5" Open Chase Holder (AAM-AOC2.5x5)

    • Product Type: Die Holder
    • Compatible With: Aamstamp Stamping Machines
    • Size: 2.5" x 5"
    • Material: Solid one piece
    • Part Number: AAM-AOC2.5x5
    Part #: AAM-AOC2.5x5

    $140.00

  20. Aamstamp 4" x 5" Open Chase Holder (AAM-AOC4x5)

    • Product Type: Die Holder
    • Compatible With: Aamstamp Stamping Machines
    • Size: 4" x 5"
    • Material: Solid one piece
    • Part Number: AAM-AOC4x5
    Part #: AAM-AOC4x5

    $185.00

  21. Aamstamp Open Chase Holders (AAM-AOC)

    • Product Type: Die Holder
    • Compatible With: Aamstamp Stamping Machines
    • Sizes: 1" x 5", 1.5" x 5", 2.5" x 5" and 4" x 5"
    • Material: Solid one piece
    • Part Number: AAM-AOC
    Part #: AAM-AOC
  22. Aamstamp Cushion Boards (AAM-CB)

    • Product Type: Cushion Board
    • Compatible With: Aamstamp Stamping Machines
    • Board Type: Soft, Medium or Hard
    • Part Number: AAM-CB
    • Product Type: Cushion Board
    Part #: AAM-CB
  23. Aamstamp Bible/Book Clamp (AAM-AMC-1)

    • Product Type: Bible Clamp
    • Compatible With: Stamping Machines
    • Part Number: AMC-1
    • Product Type: Bible Clamp
    • Used to hold the cover down and in place while it is engraved.
    Part #: AAM-AMC-1

    $13.75

  24. Aamstamp Sprite Stamping Machine - Open Box (MYR-19-189-8)

    • User friendly accessories: all machined to aerospace tolerances.
    • All 100% made in the U.S.A.
    • Fully warranted for 1 year.
    • 6" print width: every line can be up to 6".
    • Capable of printing full 2.5" x 6" area.
    Part #: MYR-19-189-8

    $580.00

Items 1-15 of 22

Display Type List Grid

Related Categories