Akiles Comb Binding
Part #: ALPHABIND-CM
- Punching Length : 12" with open throat for longer documents.
- High-Volume Punch Capacity : With its unique punching mechanism, you can punch up to 25 sheets of 20 lbs paper per lift.
- Binding Capacity : Up to 2".
- Die Disengagement Pins : Allows punching of all paper sizes without any partially punched holes.
- Depth Margin Control : Adjustable depth margins (4 steps) offers the best margin distance for each book size.
Part #: CBM650
- The CBM650 modular unit is designed to work as a stand alone unit, as well as a mounted module to one of our comb binding punches such as CombMac-24E, DuoMac and VersaMac.
- The unique ambidexterous design of CBM650 means its handle can be installed on either the left or right side, allowing an efficient operation whether you are left or right handed.
- User-friendly design and heavy-duty all metal construction guarantee maximum productivity and durability.
- Has unique ambidexterous design that allows the handle on either side
- 480 sheet binding capacity
Part #: FLEXIPUNCHPBDE
- Type : Akiles FlexiPunch-E Die Set
- Punching Pattern: Plastic Comb Binding
- Pitch: 9/16" On Center
- Hole Shape: Rectangle
- Length: Twelve Inches
Part #: ECOBIND-C
- Punching Capacity : Up to twenty sheets of 20lb bond paper per lift
- Punch Length : Twelve inch punching throat with an open throat for longer documents.
- Binding Capacity : The EcoBind-C can be used with combs that are up to 2 inches in diameter.
- Ergonomic Punching Handle : The unique design of the punching handle allows an operator to use either hand for punching. That makes this machine an excellent choice for an office environment where both left handed and right hand users will be using the binding machine.
- Fully Disengageable Pins : Allows for punching all paper sizes without any partially punched holes.
Part #: FLEXIPUNCH-M
- High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
- Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
- Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
- Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
- Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.