Akiles Die Sets

Page
  1. Akiles FlexiPunch-M 2:1 Pitch Wire Binding Die Set (FLEXIPUNCH21DM)

    • Type : Akiles FlexiPunch-M Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 2:1 Pitch (Two Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH21DM

    $259.00

  2. Akiles FlexiPunch-M 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DM)

    • Type: Akiles FlexiPunch-M Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DM

    $259.00

  3. Akiles FlexiPunch-M 4:1 Pitch Coil Binding Die Set (FLEXIPUNCH41DM)

    • Type: Akiles FlexiPunch-M Die Set
    • Punching Pattern: Spiral Coil Binding
    • Pitch: 4:1 Pitch (0.2475") (Four Holes Per Inch)
    • Hole Shape: Round
    • Length: Twelve Inches
    Part #: FLEXIPUNCH41DM

    $259.00

  4. Akiles FlexiPunch-M Binding Die Sets (FLEXIPUNCHBDS-M)

    • Type : Akiles FlexiPunch-M Die Set
    • Punching Pattern: Varies
    • Pitch: Varies
    • Hole Shape: Varies
    • Length: Twelve Inches
    Part #: FLEXIPUNCHBDS-M

    $259.00

  5. Akiles FlexiPunch-E Plastic Comb Binding Die Set (FLEXIPUNCHPBDE)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Plastic Comb Binding
    • Pitch: 9/16" On Center
    • Hole Shape: Rectangle
    • Length: Twelve Inches
    Part #: FLEXIPUNCHPBDE

    $259.00

  6. Akiles FlexiPunch-E 2:1 Pitch Wire Binding Die Set (FLEXIPUNCH21DE)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 2:1 Pitch (Two Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH21DE

    $259.00

  7. Akiles FlexiPunch-E 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DE)

    • Type: Akiles FlexiPunch-E Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DE

    $259.00

  8. Akiles FlexiPunch-E 4:1 Pitch Coil Binding Die Set (FLEXIPUNCH41DE)

    • Type: Akiles FlexiPunch-E Die Set
    • Punching Pattern: Spiral Coil Binding
    • Pitch: 4:1 Pitch (0.2475") (Four Holes Per Inch)
    • Hole Shape: Round
    • Length: Twelve Inches
    Part #: FLEXIPUNCH41DE

    $259.00

  9. Akiles FlexiPunch-E Binding Die Sets (FLEXIPUNCHBDS-E)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Varies
    • Pitch: Varies
    • Hole Shape: Varies
    • Length: Twelve Inches
    Part #: FLEXIPUNCHBDS-E

    $259.00

  10. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $592.77

  11. Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter (Coilmac-ER+)

    • Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
    • High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
    • Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
    • Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.
    • Side Margin Control : Provides an evenly centered punch for all document sizes.
    Part #: Coilmac-ER+

    $499.12

Items 1-15 of 22

Display Type List Grid

Related Categories