Akiles Modular Punch Die Set

Page
  1. Akiles VersaMac Binding Die Sets (AVM-DS)

    • Extra-High Punch Capacity: Up to 55 sheets of 20lb paper per lift. (number of sheets depends on paper weight and punch die pattern)
    • Industrial-Grade Punch Motor: Induction AC motor (400 W) with high heat resistant electromagnetic break, for years of trouble-free operation.
    • Extra Wide 14" Single punching length with Open Ends: Enables easy punching for Legal size sheets, as well as even longer sheet sizes.
    • Adjustable Depth Margin: Available for almost all punch dies, this key feature provides the correct punch margin depth for each element size.
    • Interchangeable Die with Fully Disengageable Pins: Quickly and easily change from one punch pattern to another. Fully Disengageable Pins guarantee a clean punch for any paper size.
    Part #: AVM-DS
  2. Akiles Electric Modular Interchangeable Die Binding Punch (FLEXIPUNCH-E)

    • High Volume Punching Capacity : The heavy duty electric punching mechanism can handle up to twenty sheets of 20lb paper per cycle. Plus, the FlexiPunch-E offers a foot pedal control that allows for two handed punching.
    • Heavy-Duty Punching Motor: The FlexiPunch-E offers a heavy duty commercial quality electric punching motor that provides more than enough punch power for all die sets and punching patterns.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : Allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    Part #: FLEXIPUNCH-E

    $1399.00

  3. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $440.99

  4. Akiles VersaMac Plus Interchangeable Die Binding Punch and Stacker (AKVERSAMAC+)

    • Heavy Duty Punch Motor: Punches over 500 sheets per min with 70 punch cycles per minute.
    • Interchangeable Die Sets: Quickly change punch patterns by sliding any of the 14 available die sets in and out. No tools needed.
    • Extra Large Paper Stacker: Holds up to 1500 sheets or 3 reams of 20 lb paper and includes a built-in jogger.
    • 3 Year Warranty: The VersaMac Plus is covered by our industry leading 3 year warranty and loaner program.
    • Side Margin Control: Positions your paper for a well-centered punch.
    Part #: AKVERSAMAC+

    $7000.00

Items 1-15 of 22

Display Type List Grid

Related Categories