Count Tabletop

Page
  1. Count NumberPro Touch 18" Numbering Machine (CNUMPRO18)

    • Easily program to number, perforate or score, individually or at the same time.
    • Offers a reliable top-load friction paper feed.
    • Includes a sheet counter (for both batch and total sheet count).
    • Includes reliable electric, Gothic wheel reverse numbering heads - with 7 digits, 4 drop zeros and multiple repeats.
    • Apply numbers virtually anywhere on a sheet - from lead edge, place numbers within 1 mm of previous number.
    Part #: CNUMPRO18

    $8238.00

  2. Count Auto Pro Touch 18" Numbering Machine (CAUTOPRO1)

    • Easily program to number, perforate or score, individually or at the same time.
    • Offers a reliable bottom friction feed paper feed.
    • Includes a sheet counter (for both batch and total sheet count).
    • Includes reliable pneumatic, Gothic wheel reverse numbering heads - with 7 digits, 4 drop zeros and multiple repeats.
    • Apply numbers virtually anywhere on a sheet - from lead edge, place numbers within 1 mm of previous number.
    Part #: CAUTOPRO1

    $10653.00

  3. Count Tablematic Plus Tabletop Numbering Machine (CTABLEM)

    • Full 11-1/2" x 16" work base
    • Accommodates single sheets, crash numbers, and multipart forms up to 6 parts magnetic backstop and built-in side rails for positive registration
    • Six digit numbering head
    • Tablematic offers a user friendly attitude and flexability
    • 14" wide unit is designed to do high-quality numbering
    Part #: CTABLEM

    $1938.00

  4. Count Friction-Fed Digital Creasing/Perforating/Numbering Machine (FC114)

    • Simple programming allows you to number, perforate or crease individually.
    • Creasing:
    • Rotary-actuated impact creasing.
    • Two-sided creasing die - one side has a narrow crease and the other a wide crease for heavier stock to change, simply remove the die and flip it over.
    • Automated Distance Recognition - allows auto setups for your most common creases and corresponding folds.
    Part #: FC114

    $13015.00

  5. Count PerfMaster Sprint 18" Perforating and Scoring Machine (CPMASTER18F)

    • Removable receiving tray and side rails make for easy mobility and tabletop use.
    • Quickly change from perforating to scoring in just seconds.
    • 18" wide paper feed capacity.
    • Easily set Perf/Score depth control.
    • Feeds single sheets, coated stock or multi-part open or glued edges.
    Part #: CPMASTER18F

    $5875.00

  6. Count PerfMaster Dash Hand Crank Perforating and Scoring Machine (CPMASTERDASH)

    • Easy-to-use hand crank operation is simple and affordable.
    • Removable receiving tray and magnetic guide rails make for easy mobility and tabletop use.
    • Quickly change from perforating to scoring in seconds.
    • Easily set Perf/Score depth control.
    • 18" wide feed capacity.
    Part #: CPMASTERDASH

    $3513.00

  7. Standard PF-40L Auto Suction Feed Tabletop Folder with Stand (PF-40L-MT-40L)

    • Quick and Easy Setup. Simply select sheet size and fold pattern and each section sets-up automatically. The folder is equipped with 2 buckles to meet a variety of folds. Fine-tune adjustment can be done at 0.1 mm for accurate folding.
    • Simple Operation Panel. User friendly operator console for easy operation and setting. Programming such as pre-set counting and job memory can be set-up for efficient production.
    • High Performance Suction Rotor Feeding. Uniquely designed suction rotor feeding is employed to meet high speed production up to 390 sheets per minute, wide range of paper stock can be fed with ease.
    • High Capacity Feeder. High capacity feed table (1,300 sheets of 64 gsm can be loaded) to minimize sheet loading during longer production runs.
    • Crisp Tight Fold Quality. Crisp tight fold quality is ensured with uniquely designed combination of soft polyurethane foam rubber and steel rollers. Roller gap can be adjusted with a simple dial to fold thinner to thicker sheets.
    Part #: PF-40L-MT-40L

    $13050.00

  8. Baum 714XAPA Autofold Air Feed Tabletop Paper Folder (BAUM714XA)

    • Capability to feed and fold 25.5 inch long paper for tri-folding brochures etc. (The 714XA is the only machine in this size and price range that can do this).
    • Multiple job memory of 20 custom entry folds with easy recall.
    • PLC touch screen control panel with color display and easy to follow pictographs.
    • Batch counter that can count up or count down.
    • BAUM Turbo Wheel air/vacuum feeding technology.
    Part #: BAUM714XA

    $15255.00

Items 1-15 of 22

Display Type List Grid

Related Categories