Drytac Laminating
-
Drytac Eraser Block (ACC9010)
- Size: 1 3/8" x 1 3/8" x 6"
- Part Number: ACC9010
- Size: 1 3/8" x 1 3/8" x 6"
- Specially designed for multi-heat laminators, this large, rubber cleaning block removes adhesive residue from roller surfaces.
- Quantity: 1
Part #: ACC9010 -
Drytac Foam Overlay Blanket - 1/2" x 54" x 56" (FO7040)
- Size: 1/2" x 54" x 56"
- Designed For: Lamination Processs
- Compatible With: Pre-perforated ArtShield UV HeatSet laminating Films
- Finish: Blemish-Free
- Part Number: FO7040
Part #: FO7040 -
Drytac Foam Overlay Blanket - 1/2" x 65" x 120" (FO7055)
- Size: 1/2" x 65" x 120"
- Designed For: Lamination Processs
- Compatible With: Pre-perforated ArtShield UV HeatSet laminating Films
- Finish: Blemish-Free
- Part Number: FO7055
Part #: FO7055 -
Drytac Foam Overlay Blanket - 1/4" x 65" x 110" (FO65110-Q)
- Size: 1/4" x 65" x 110"
- Designed For: Lamination Processs
- Compatible With: Pre-perforated ArtShield UV HeatSet laminating Films
- Finish: Blemish-Free
- Part Number: FO65110-Q
Part #: FO65110-Q -
Drytac Foam Overlay Blanket (DFOLB)
- Sizes: 1/2" x 54" x 56", 1/2" x 65" x 120", and 1/4" x 65" x 110"
- Designed For: Lamination Processs
- Compatible With: Pre-perforated ArtShield UV HeatSet laminating Films
- Finish: Blemish-Free
- Sizes: 1/2" x 54" x 56", 1/2" x 65" x 120", and 1/4" x 65" x 110"
Part #: DFOLB -
Drytac 12" Dust Removal System Roller (ACC9050)
- Size: 12"
- Warning: Not suitable with Epson Printers
- Part Number: ACC9050
- Size: 12"
- Warning: Not suitable with Epson Printers
Part #: ACC9050 -
Drytac Tac Cloth (25pk) (ACC9602)
- Size: Package of 25
- Part Number: ACC9602
- Quantity:: Package of 25
- Designed to wipe down foam board, GatorFoam, MDF, hardboard and other mounting substrates
- Improves finishing results and minimizes imperfections due to surface contaminants
Part #: ACC9602 -
Drytac Zippy Cutter Replacement Blade (12pk) (ZC8011)
- Size: Package of 12
- Part Number: ZC8011
- Quantity: Package of 12
- Fully enclosed by a moulded plastic handle to protect fingers and silicone rollers
- Color: Silver
Part #: ZC8011 -
Drytac Dust Removal System Pad - (50 sheets/pad) (PCRPAD)
- Qty: 50 Sheets/Pad
- Warning: Is not suitable with Epson Printers
- Part Number: PCRPAD
- Roller is not included
- Qty: 50 Sheets/Pad
Part #: PCRPAD -
Drytac Magnetic Laminator Caddy - 1pk (ACC6000)
- Keeps gloves, eraser blocks, tape measures, Zippy Cutters and pencils close at hand, yet away from the laminator nip and emergency stops.
- Strong rubber covered magnets attach the back basket firmly while protecting the surface finish
- Quantity: 3
- Part Number: ACC6000
- Keeps gloves, eraser blocks, tape measures, Zippy Cutters and pencils close at hand, yet away from the laminator nip and emergency stops.
Part #: ACC6000 -
Drytac 41" x 328' Single-Sided Release Paper (GRP41328)
- Product Type: Single-Sided Release Paper
- Size: 41" x 328'
- Application: Picture Framing/Photography
- Can be used in: Drytac HotPress or Roll Laminators.
- Part Number: GRP41328
Part #: GRP41328 -
Drytac ML25 Manual Hand Crank Pressure Sensitive Cold Mount Roll Laminator (DTML25)
- Max Laminating Width: 25.5 inches (648mm)
- Width: 27.375 inches (695.3mm)
- Depth: 24.5 inches (622mm)
- Height: 10.25 inches (260mm)
- Roller Diameter: 2.5 inches (63.5mm)
Part #: DTML25 -
Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator (DTJM18)
- Max Laminating Width: 18.25 inches (464mm)
- Width: 25.5 inches (648mm)
- Depth: 11.75 inches (299mm)
- Height: 13 inches (330mm)
- Weight: 51 lbs (23 kg)
Part #: DTJM18 -
Drytac JetMounter JM26 Electric 26 Inch Pressure Sensitive Cold Mount Laminator (DTJM26)
- Max Laminating Width: 26.25 inches (667mm)
- Width: 33.25 inches (845mm)
- Depth: 12.2 inches (310mm)
- Height: 12.3 inches (312.5mm)
- Weight: 53 lbs (24 kg)
Part #: DTJM26 -
Drytac MediaTac 25.5" x 164' Pressure Sensitive Aqueous Adhesive (PSA26-25164)
- Roll Width: 25.5"
- Roll Length: 164'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-25164 -
Drytac MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive (PSA26-38164)
- Roll Width: 38"
- Roll Length: 164'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-38164 -
Drytac MediaTac 38" x 328' Pressure Sensitive Aqueous Adhesive (PSA26-38328)
- Roll Width: 38"
- Roll Length: 328'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-38328 -
Drytac MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive (PSA26-41328)
- Roll Width: 41"
- Roll Length: 328'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-41328 -
Drytac SureTac White 51" x 300' Premium PS Mounting Adhesive (PSA29510)
- Roll Width: 51"
- Roll Length: 300'
- Core Size: 3"
- Laminate Type: SureTac White Premium Mounting Adhesive
- Filmic Carrier: 1.1mil (28 micron) white polypropylene
Part #: PSA29510 -
Drytac SureTac White 61" x 150' Premium PS Mounting Adhesive (PSA29615)
- Roll Width: 61"
- Roll Length: 300'
- Core Size: 3"
- Laminate Type: SureTac White Premium Mounting Adhesive
- Filmic Carrier: 1.1mil (28 micron) white polypropylene
Part #: PSA29615 -
Drytac MHL Frost UV 6mil 38" x 250' Low Temp Laminating Film (MZ38206)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MZ38206 -
Drytac MHL Frost UV 6mil 51" x 250' Low Temp Laminating Film (MZ51206)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MZ51206 -
Drytac MHL Impervo UV 5mil 25" x 250' Hardcoat Laminating Film (MLL25205)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MLL25205 -
Drytac MHL Impervo UV 5mil 38" x 250' Hardcoat Laminating Film (MLL38205)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MLL38205 -
Drytac MHL Impervo UV 5mil 43" x 250' Hardcoat Laminating Film (MLL43205)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MLL43205 -
Drytac MHL Impervo UV 5mil 51" x 250' Hardcoat Laminating Film (MLL51205)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MLL51205 -
Drytac MediaTac 51" x 164' Pressure Sensitive Aqueous Adhesive (PSA26-51164)
- Roll Width: 51"
- Roll Length: 164'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-51164 -
Drytac MediaTac 51" x 328' Pressure Sensitive Aqueous Adhesive (PSA26-51328)
- Roll Width: 51"
- Roll Length: 328'
- Core Size: 3"
- Laminate Type: MediaTac Adhesive
- Filmic Carrier: 0.5 mil (13 micron) clear polyester
Part #: PSA26-51328 -
Drytac JetMounter Electric 34 Inch Pressure Sensitive Cold Mount Laminator (JM34)
- Max Laminating Width: 34.25" (86.9 cm)
- Max Board Thickness: .75" (1.9 cm)
- Unpacked Weight: 70.5 lbs (32 kg)
- Width: 41.33" (105 cm)
- Depth: 11.8" (30 cm)
Part #: JM34 -
Drytac MHL Frost UV 6mil Low Temp Laminating Film (MZ206)
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
Part #: MZ206
Related Categories
- Drytac Laminating Accessories
- Black Drytac Laminating Accessories
- White Drytac Laminating Accessories
- Clear Drytac Laminating Accessories
- Clear Drytac Laminating Film
- Drytac Laminator Film
- Drytac Laminating Equipment
- Drytac Laminating Sheets
- Drytac Frost Laminating Film
- Mhl Impervo UV Hardcoat Laminating Film
- Drytac Mhl
- Drytac Mhl Impervo
