Need Help 1-800-944-4573 1-800-944-4573

Drytac Pressure Sensitive

  1. Drytac MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-38164

    • Roll Width: 38"
    • Roll Length: 164'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $385.94

    Your Price: $270.16

    You Save: 29%

  2. Drytac MediaTac 38" x 328' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-38328

    • Roll Width: 38"
    • Roll Length: 328'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $698.70

    Your Price: $489.09

    You Save: 30%

  3. Drytac MediaTac 41" x 328' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-41328

    • Roll Width: 41"
    • Roll Length: 328'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $701.46

    Your Price: $491.02

    You Save: 30%

  4. Drytac Protac High Gloss UV 5.0mil 25.5" x 150' PS Overlaminate - Pressure Sensitive

    Part number: PLHG3255

    • Film Width: 25.5"
    • Film Length: 150'
    • Film Thickness: 5.0mil
    • Core Size: 3"

    List Price: $434.00

    Your Price: $303.80

    You Save: 30%

  5. Drytac Protac High Gloss UV 5.0mil 38" x 150' PS Overlaminate - Pressure Sensitive

    Part number: PLHG3385

    • Film Width: 38"
    • Film Length: 150'
    • Film Thickness: 5.0mil
    • Core Size: 3"

    List Price: $671.72

    Your Price: $470.20

    You Save: 30%

  6. Drytac Protac High Gloss UV 5.0mil 51" x 150' PS Overlaminate - Pressure Sensitive

    Part number: PLHG3515

    • Film Width: 51"
    • Film Length: 150'
    • Film Thickness: 5.0mil
    • Core Size: 3"

    List Price: $886.50

    Your Price: $620.55

    You Save: 30%

  7. Drytac Protac SheenTex 4.2mil 51" x 164' PS Overlaminate - Pressure Sensitive

    Part number: PS-TM51164

    • Film Width: 51"
    • Film Length: 164'
    • Film Thickness: 4.2mil
    • Core Size: 3"

    Your Price: $371.00

  8. Drytac Protac SheenTex 4.2mil 61" x 164' PS Overlaminate - Pressure Sensitive

    Part number: PS-TM61164

    • Film Width: 61"
    • Film Length: 164'
    • Film Thickness: 4.2mil
    • Core Size: 3"

    List Price: $630.00

    Your Price: $360.00

    You Save: 42%

  9. Drytac Protac Emerytex UV 5.0mil 38" x 164' PS Overlaminate - Pressure Sensitive

    Part number: PST38164

    • Features:
    • Matte PVC overlaminates with a pebble texture finish
    • Utilizes various acrylic adhesives (aqueous, solvent and HeatsetĀ®) Benefits:
    • Anti-slip properties make it suitable for floor graphics
    • Recommended for use in medium to high traffic indoor display areas

    List Price: $624.65

    Your Price: $437.26

    You Save: 29%

  10. Drytac Protac Emerytex UV 5.0mil 51" x 164' PS Overlaminate - Pressure Sensitive

    Part number: PST51164

    • Features:
    • Matte PVC overlaminates with a pebble texture finish
    • Utilizes various acrylic adhesives (aqueous, solvent and HeatsetĀ®) Benefits:
    • Anti-slip properties make it suitable for floor graphics
    • Recommended for use in medium to high traffic indoor display areas

    List Price: $800.48

    Your Price: $560.34

    You Save: 29%

  11. Drytac Protac Polycarbonate UV 10.0mil 38" x 75' PS Overlaminate - Pressure Sensitive

    Part number: PPC38075-10

    • Film Width: 38"
    • Film Length: 75'
    • Film Thickness: 10.0mil
    • Core Size: 3"

    List Price: $656.38

    Your Price: $459.47

    You Save: 29%

  12. Drytac Protac Polycarbonate UV 10.0mil 51" x 75' PS Overlaminate - Pressure Sensitive

    Part number: PPC51075-10

    • Film Width: 51"
    • Film Length: 75'
    • Film Thickness: 10.0mil
    • Core Size: 3"

    List Price: $857.92

    Your Price: $600.54

    You Save: 30%

  13. Drytac Protac Scribe 2.5mil 38" x 150' Dry-Erase PS Overlaminate - Pressure Sensitive

    Part number: PSC38150

    • Film Width: 38"
    • Film Length: 164'
    • Film Thickness: 2.5mil
    • Core Size: 3"

    List Price: $415.62

    Your Price: $290.93

    You Save: 30%

  14. Drytac Protac Scribe 2.5mil 41" x 150' Dry-Erase PS Overlaminate - Pressure Sensitive

    Part number: PSC41150

    • Film Width: 41"
    • Film Length: 164'
    • Film Thickness: 2.5mil
    • Core Size: 3"

    List Price: $448.44

    Your Price: $313.91

    You Save: 29%

  15. Drytac Protac Scribe 2.5mil 54" x 150' Dry-Erase PS Overlaminate - Pressure Sensitive

    Part number: PSC54150

    • Film Width: 54"
    • Film Length: 164'
    • Film Thickness: 2.5mil
    • Core Size: 3"

    List Price: $512.00

    Your Price: $358.40

    You Save: 30%

  16. Drytac WindowTac 41" x 164' Pressure Sensitive Mounting Adhesive

    Part number: PWD41164

    • Features:
    • Clear, double-sided mounting adhesive with an embossed release liner
    • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
    • Excellent clarity without bubbles or wrinkling
    • Provides additional UV protection for graphics printed with dye-based or pigmented inks Benefits:

    List Price: $588.35

    Your Price: $411.85

    You Save: 29%

  17. Drytac WindowTac 51" x 164' Pressure Sensitive Mounting Adhesive

    Part number: PWD51164

    • Features:
    • Clear, double-sided mounting adhesive with an embossed release liner
    • Micro-grooves in the removable adhesive allow for easy air evacuation with a squeegee
    • Excellent clarity without bubbles or wrinkling
    • Provides additional UV protection for graphics printed with dye-based or pigmented inks Benefits:

    List Price: $731.85

    Your Price: $512.30

    You Save: 29%

  18. Drytac MediaTac 51" x 164' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-51164

    • Roll Width: 51"
    • Roll Length: 164'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $454.01

    Your Price: $317.81

    You Save: 29%

  19. Drytac MediaTac 51" x 328' Pressure Sensitive Aqueous Adhesive - Mounting Adhesives

    Part number: PSA26-51328

    • Roll Width: 51"
    • Roll Length: 328'
    • Core Size: 3"
    • Laminate Type: MediaTac Adhesive

    List Price: $831.48

    Your Price: $582.04

    You Save: 29%

  20. Drytac MHL Scribe 3mil 25" x 500' Dry Erase Laminating Film - Pressure Sensitive

    Part number: MS25503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $229.48

    Your Price: $163.89

    You Save: 28%

  21. Drytac MHL Scribe 3mil 38" x 500' Dry Erase Laminating Film - Pressure Sensitive

    Part number: MS38503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $348.86

    Your Price: $244.20

    You Save: 30%

  22. Drytac MHL Scribe 3mil 51" x 500' Dry Erase Laminating Film - Pressure Sensitive

    Part number: MS51503

    • MHL overlaminating films are specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators. These high quality laminating / encapsulating films are co-extruded for a carefully balanced ratio of polyester film to adhesive. The result is higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out). MHL laminating films are Consider webbing your laminator with a gloss film on top and a luster film on the bottom supply shaft. This will allow you to change the surface finish by feeding in your image either face up or face down. Use your idler bar to increase the area of contact between the heated rollers and the film. To allow for proper heat recovery, laminators with smaller diameter rollers require a slower processing speed and / or higher operating temperature for the best results. MHL laminating films bond while they are cooling (thermoplastic). This means that it is important that you create a steady uniform tension with the pull rollers (and a cooling system for thicker films) to ensure a smooth, flat encapsulated print without waves or wrinkles.

    List Price: $468.16

    Your Price: $327.71

    You Save: 30%

  23. Drytac SureTac White 61" x 150' Premium PS Mounting Adhesive

    Part number: PSA29615

    • Roll Width: 61"
    • Roll Length: 300'
    • Core Size: 3"
    • Laminate Type: SureTac White Premium Mounting Adhesive

    List Price: $793.73

    Your Price: $555.61

    You Save: 30%

  24. Drytac FaceMount 38" x 150' Optically Clear Mounting Adhesive

    Part number: PSF38150

    • Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
    • Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
    • Suitable for indoor and short-term outdoor use.
    • Film Finish: Clear Polyester

    List Price: $875.86

    Your Price: $613.10

    You Save: 30%

  25. Drytac FaceMount 51" x 150' Optically Clear Mounting Adhesive

    Part number: PSF51150

    • Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
    • Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
    • Suitable for indoor and short-term outdoor use.
    • Film Finish: Clear Polyester

    List Price: $1,196.80

    Your Price: $837.76

    You Save: 30%

  26. Drytac FaceMount 60.2" x 150' Optically Clear Mounting Adhesive

    Part number: PSF61150

    • Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
    • Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
    • Suitable for indoor and short-term outdoor use.
    • Film Finish: Clear Polyester

    Your Price: $1,084.80

  27. Drytac FaceMount 72" x 150' Optically Clear Mounting Adhesive

    Part number: PSF72150

    • Recommended for second surface mounting (commonly referred to as face mounting) of images to clear substrates, such as PetG, Plexiglas, acrylic, polycarbonate, and glass.
    • Ideal for lenticular imaging applications, backlit display transparencies, touch screen displays, and high quality photographic and inkjet printed images.
    • Suitable for indoor and short-term outdoor use.
    • Film Finish: Clear Polyester

    List Price: $1,856.20

    Your Price: $1,299.34

    You Save: 30%

  28. Drytac ML25 Manual Hand Crank Pressure Sensitive Cold Mount Roll Laminator

    Part number: DTML25

    • Max Laminating Width: 25.5 inches (648mm)
    • Width: 27.375 inches (695.3mm)
    • Depth: 24.5 inches (622mm)
    • Height: 10.25 inches (260mm)

    Your Price: $348.99

  29. Drytac JetMounter JM18 Electric 18 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators

    Part number: DTJM18

    • Max Laminating Width: 18.25 inches (464mm)
    • Width: 25.5 inches (648mm)
    • Depth: 11.75 inches (299mm)
    • Height: 13 inches (330mm)

    Your Price: $780.95

  30. Drytac JetMounter JM26 Electric 26 Inch Pressure Sensitive Cold Mount Laminator - Roll Laminators

    Part number: DTJM26

    • Max Laminating Width: 26.25 inches (667mm)
    • Width: 33.25 inches (845mm)
    • Depth: 12.2 inches (310mm)
    • Height: 12.3 inches (312.5mm)

    List Price: $995.00

    Your Price: $994.00

    You Save: 0%