Electric Paper Cutter

Page
  1. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  2. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter (CH-SPARTAN150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150SA

    $4745.00

  3. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  4. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA)

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  5. Formax Cut-True 22S 17" Electric Paper Cutter (FDCT22S)

    • Guillotine cutter accurately cuts through paper stacks up to 1.75" high, up to 16.9" wide
    • Semi-automatic with electronically-controlled two-hand operation
    • LED Laser cut line for pinpoint accuracy
    • High-quality hardened steel blade
    • Spindle-guided back gauge with LED display
    Part #: FDCT22S

    $3188.00

  6. Formax Cut-True 27S 19" Semi-Automatic Electric Paper Cutter (FD-CT27S)

    • Cutter accurately cuts through paper stacks up to 3.15" high, up to 18.9" wide
    • Semi-automatic with electronically-controlled two-hand operation
    • LED Laser cut line for pinpoint accuracy
    • High-quality hardened steel blade
    • Spindle-guided back gauge with LED display
    Part #: FD-CT27S

    $7785.00

  7. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450)

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $6390.00

  8. Standard 17.7" Programmable Electric Paper Cutter (APC-450)

    • Control Panel:
    • Job recall function. Frequent jobs, for example A3 cut to A4 can be recalled with the push of a button. Three “Quick Call” buttons are available to program frequent jobs.
    • Programming function. Repeat jobs can be conveniently saved to memory. The capacity of job memory is 30 courses and 99 steps (total 300 points).
    • Operator Safety:
    • Standard Equipped Area Sensors. If the area sensors detect any objects, the cutting motion will stop immediately. These sensors meet the high level of safety in Category 4 according to ISO13849-1.
    Part #: APC-450

    $11900.00

  9. MBM Triumph 4350 16.875" Electric Paper Cutter With Digital Display (MB-4350)

    • SCS (Safety Cutting System) package.
    • Hinged, transparent electronically controlled front safety guard.
    • Transparent safety cover on rear table.
    • Main switch and safety lock with key.
    • Electronically controlled, true two-hand operation.
    Part #: MB-4350

    $5499.00

  10. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  11. Standard 25" Electric Paper Cutter (PC-640)

    • Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.
    • Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
    • Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety. Simple and safe operation suitable for office use.
    • Easy Operation - Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons.
    • Double Safety Circuit -The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
    Part #: PC-640

    $9900.00

  12. Standard Electric 17" Desktop Paper Cutter (PC-P430)

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $4770.00

  13. Formax Cut-True 31A 28" Electric Guillotine Cutter (Cut-True31A)

    • Standard Features:
    • Heavy Duty Construction: Designed for true two-shift operation.
    • High-Speed Hardened Steel Blade: Designed for accurate cuts and long life.
    • Electronically-Controlled: Paper clamp pressure and blade carrier.
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use.
    Part #: Cut-True31A

    $19346.00

  14. MBM Triumph 4850 18.625" Electric Paper Cutter with Digital Display (MBM-4850)

    • SCS (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine
    • Electric blade and clamp drive
    • Solingen steel blade
    • Solid steel bade carrier and adjustable blade guides
    • Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
    Part #: MBM-4850

    $9899.00

  15. Challenge Titan 200BC 20" Hydraulic Paper Cutter with Tilt Shield (CH-TITAN200BC)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has clear plexiglass shield that you have to flip down in order for the cutter to work
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Plexiglas Safety Shield.
    Part #: CH-TITAN200BC

    $11595.00

  16. MBM Triumph 4315 16.875" Semi-Automatic Tabletop Paper Cutter (CU0451)

    • Electric blade drive
    • Soligen steel blade
    • Solid steel blade carrier and adjustable blade guides
    • Patented, lever-activated, fast-action clamp
    • Precision side guide
    Part #: CU0451

    $4599.00

  17. MBM Triumph 4815 18.625" Electric Paper Cutter With Digital Display (MBM-CU0418)

    • Transparent Safety Guard : A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Back Gauge Hand Crank : The calibrated hand crank is used to set the spindle-guided back gauge. The LED display ensures precise positioning.
    • Easy Cut Blade Activation Bars : Patented EASY CUT blade activation bars ensure true, two-hand operation.
    • Optical Cutting Line : A bright, LED optical cutting line indicates the exact position of cut and helps to perfectly position trim marks.
    • Tool Holder : Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0418

    $8149.00

  18. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  19. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  20. Challenge Titan 200BC 20" Hydraulic Paper Cutter with Light Beam (TITAN200BCLB)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has laser light beams for safety that detect if anything is in the way
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Light Beam Curtain
    Part #: TITAN200BCLB

    $13595.00

  21. Challenge Titan 230 TC 23" Hydraulic Programmable Paper Cutter w/ Color Touch Screen Control (CH-TITAN230TC)

    • 10.5" Color Touch Screen
    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    Part #: CH-TITAN230TC

    $19995.00

  22. Challenge Champion 305 TC 30.5" Programmable Paper Cutter (CH-305TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening.
    • Hydraulic clamping and cutting.
    Part #: CH-305TC

    $33295.00

  23. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  24. Standard 24" Programmable Hydraulic Paper Cutter (APC-610)

    • Hydraulic clamping and cutting mechanism ensures powerful and accurate cutting quality.
    • The servo-motor driven backgauge assures accurate positioning and repeatability for consistent quality production.
    • The color touchscreen is intuitive and icon-based for user-friendly operation. Operation, setting and information screens are used for efficient and accurate operation.
    • The Simple Program Setting screen displays sheet rotating direction and cutting order graphically.
    • The APC-610 is activated only when the two cut buttons are simultaneously pressed for operator safety.
    Part #: APC-610

    $28100.00

  25. Challenge Champ 150 15" Fully Hydraulic Paper Cutter (MY04CHLCHAMP150)

    • Hydraulic knife drive.
    • Hydraulic clamp drive.
    • Front safety tilt shield covers cutting area.
    • Clamp only cycle or clamp and cut cycle.
    • Digital display of cut length setting.
    Part #: MY04CHLCHAMP150

    $8495.00

  26. YUL Programmable 19" Electric Paper Cutter with Wifi/3G Option (EPC019)

    • Performance:
    • Fully programmable up to 100 programs x 100 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC019

    $9650.00

  27. YUL Programmable 26" Electric Paper Cutter with Wifi/3G Option (EPC026)

    • Performance:
    • Fully programmable up to 100 programs x 100 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC026

    $21428.57

  28. YUL Programmable 22" Electric Paper Cutter with Wifi/3G Option (EPC022 )

    • Performance:
    • Fully programmable up to 1000 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC022

    $15000.00

  29. YUL Programmable 17" Electric Paper Cutter with Wifi/3G Option (EPC017)

    • Performance:
    • Fully programmable up to 1000 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC017

    $7750.00

  30. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

Items 1-15 of 22

Display Type List Grid

Related Categories