Hot Roll Laminator

Page
  1. Duralam Integra 27" Hot Roll Laminator (EGML2700)

    • True Variable Speed - allows the operator to process big sheet work at high speed, yet slow the speed as required to place small or very small workpieces on the infeed without wasting laminating film. Set the speed to suit the need pace, avoid waste and SAVE!
    • Simplicity of Controls - By design, the control panel of the Duralam Integra is simple and user friendly, reducing problems due to operator error. Users can be easily trained how to run the Duralam Integra.
    • Safety Mechanisims That Work - The chance of an operator getting burned by this laminator is virtually zero. Cut out the exorbitant cost and poor quality cold laminating.
    • Simplest Laminator to Load - Using collar mounts, you can load both rolls in under five minutes-easily.
    • Quickest Warm Up Time - Our technicians think 15 - 20 minute warmup times are a terrible waste of time and money. Warmup time for the Duralam™ Integra is only six minutes.
    Part #: EGML2700

    $1854.00

  2. Ledco Signmaster 44" Hot Roll Laminator & Mounter 110V (2044110)

    • A release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
    • Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
    • A variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed mode, a preset film speed mode and a preset pouch speed mode.
    • The feed tray is non-ferrous, so magnetic materials may be applied.
    • The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
    Part #: 2044110

    $9678.99

  3. Ledco Digital 44" Dual Hot Roll Laminator & Mounter (4400200P)

    • Quality silicone rubber laminating rollers release materials easily and maintain their flexibility for a good edge seal.
    • Two sets of rollers keep the film flat and tight while heat laminating so that the automatic fans cool and set the adhesive. When thermal films cool in a slack state, the surface of the lamination is wavy and rippled.
    • Supply roll tension is easy to adjust by simply tightening or loosening the tension control knobs on the supply roll mandrels.
    • Variable speed allows thinner films to be run faster, and enables mounting or the use of thicker films, which require slower speeds.
    • Independent temperature controls for top and bottom heaters allow the use of different materials on front and back of an image.
    Part #: 4400200P

    $18379.82

  4. Ledco Heavy Duty 20" Hot Roll Laminator with Stand (H20)

    • Variable speed. The laminator operates at any speed up to 10 feet / 3 meters per minute. Thicker hot films are generally applied better at mid-range to lower speeds, while 1.5 mil hot films should be applied at mid-range to higher speeds.
    • Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat so they’ll be protected from hot areas. It is fixed to the laminator and the machine will not run if the feed tray and safety shield are not in place.
    • Lamination pressure. The rubber rollers are spring-loaded and preset to ensure correct and even lamination pressure. The pressure is easy to adjust if required when performing routine maintenance.
    • Ease of cleaning. The heated silicone rubber laminating rollers, and the silicone rubber pull rollers of the laminator should be cleaned regularly. The safety shield (see below) on the laminator swings away in seconds, making it easy to clean the laminating rollers.
    • Precision Heat Controls. Individual top and bottom heat controls, as used on our other Digital Laminators, allow for even, consistent heating of the laminating rollers throughout the entire temperature range.
    Part #: H20

    $12186.67

  5. Ledco B64 64" Wide Format Hot Roll Laminator and Mounter (B640220A)

    • Common Applications Include:
    • Transfer tape applications.
    • Vinyl application to sign blanks.
    • Mounting and over-laminating using thermal mounting pouches.
    • One sided over lamination using pressure sensitive films.
    Part #: B640220A

    $37634.62

  6. Drylam 27" Professional Series Roll Laminator (DL-27STA)

    • Laminates up to 27" wide.
    • Up to 9.5' per minute
    • User defined Preset save speed and temperature settings
    • Usage counter with reset
    • Hand held slitter with convenient storage on the machine
    Part #: DL-27STA

    $1786.90

  7. GBC 5031TS Roll Laminator (1711718)

    • Film speed: 4 to 35 feet per minute
    • Maximum film width: 31"
    • Film gauge: 1.5 mil to 10 mil
    • Accommodates 10" diameter rolls for fewer film changes on long runs
    • Three slitters allow edge and center slitting of 2-up jobs
    Part #: 1711718

    $20487.00

  8. Royal Sovereign 15 Inch Roll Laminator with De-Curler (RSH-380SL)

    • Max. Laminating Width: 15 in. (380 mm)
    • Film Thickness: 1 - 10 mil (25 - 250 mic)
    • Max. Laminating Speed: 14.8 ft./min. (4.5 m/min.)
    • Speed Control: 9 Digital Settings
    • Drive Motor: DC Geared
    Part #: RSH-380SL

    $2071.43

  9. Tamerica Versalam 2700-HC 27" Hot and Cold Roll Laminator (VERSALAM-2700-HC)

    • Accommodates up to 10mil film thickness.
    • Laminates up to 27" in width and mounts up to 1/4".
    • Laminates up to 5' per minute.
    • Allows for one sided and two sided laminating.
    • Variable speed and temperature controls.
    Part #: VERSALAM-2700-HC

    $3999.00

  10. SEAL 65 Pro MD 65" Wide Format Roll Laminator (SEAL-65ProMD)

    • Dual IR Quartz heated rollers capable of running both hot and cold films.
    • 65" working width to handle a wide range of media.
    • Maximum operating speed of 15’/minute.
    • 2" nip with precision pneumatic rollers for even speed and pressure to ensure smooth, wrinkle-free graphics.
    • Bi-directional operation allows for efficient operating.
    Part #: SEAL-65ProMD

    $45645.60

  11. Akiles ProLam R27 Heavy Duty 27" Roll Laminator (AKPROLAMR27)

    • Laminates up to 27": Desktop design is perfect for small work areas and laminates documents up to 27" wide.
    • Easy to Use Control Panel: LED display gives you precise control of heat and speed, while giving you the versatility to start, stop, and reverse the rollers.
    • Multiple Safety Features: Built-in sleep mode shuts off the heat if machine is idle for two hours. Safety latches on the heat shield and feed tray make sure the R27 only operates when ready.
    • Large Heated Rollers: Large 2.17" heated rollers give you a perfect seal even when laminating multiple items.
    • Safety Shield with Lock.
    Part #: AKPROLAMR27

    $1999.00

  12. GBC 620os -1 Roll Laminator and Cutter (3600262)

    • Semi-automatic feed table and dual gates automatically set the overlap
    • Automatic separator
    • Speeds up to 45' per minute
    • Pneumatically controlled pressure ensures superior adhesion
    • Teflon coated heat roller for even heat distribution
    Part #: 3600262

    $31167.79

  13. Tamerica TCC1200 Wide Format 45" Hot and Cold Roll Laminator (TP-TCC1200)

    • Take up bar for cold lamination.
    • Tension adjustment.
    • Silicon rollers for enhanced laminating.
    • Vacuumed table for smooth feeding.
    • 1-side & 2-side lamination.
    Part #: TP-TCC1200

    $7299.00

  14. Phoenix 44" Wide Format Hot and Cold Roll Laminator (4400-DHP)

    • Production:
    • 8 feer per minute.
    • 4.5" heated silicone coated rollers.
    • PSA liner rewind.
    • Sleep mode and auto shut-off.
    Part #: 4400-DHP

    $7095.00

  15. GBC Discovery 80 High Speed 31" Laminator (1711710)

    • Memory function convenienty saves and recalls up to nine different set-up positions for speed and temperature.
    • Swing away heat shoes allow for safe and easy cleaning. Teflon coating reduces film scratching.
    • Variable film speed control from one to twenty feet per minute.
    • Handles rolls up to 2000 feet for continuous operation
    • Standard 2-1/4" core easily adapts for 1" and 3" core film
    Part #: 1711710

    $6876.76

  16. Drylam 27" Professional Series Complete Laminator System (DL-20007)

    • Laminates up to 27" wide.
    • Up to 9.5' per minute
    • User defined Preset save speed and temperature settings
    • Usage counter with reset
    • Hand held slitter with convenient storage on the machine
    Part #: DL-20007

    $2501.50

  17. Ledco Educator 25" School Laminator (9025100D)

    • Preset lamination pressure and speed. Makes the machine easier to use and eliminates many possible sources of problems.
    • Enclosed laminating and pull rollers. Helps you avoid time-consuming jams and wrap-arounds.
    • Forced air cooling. Allows laminating with 3 and 5-mil films, as well as the 1.5 mil film often used by schools. Without a film cooling system, thicker films will warp and ripple because they are still hot and partly melted when they come out of the laminator.
    • Fixed-position lamination rollers. Provides a stable platform for uniform roll pressure which provides the highest quality lamination available in a school laminator.
    • Attached safety shield. The safety shield is fixed to the machine and is placed so that the operator will naturally put it in the guard position before laminating. The shield is made of clear polycarbonate so users can see their work and will not be tempted to try to laminate without the shield in its safe position.
    Part #: 9025100D

    $2127.00

  18. Hot Pink Metallic 12" x 500' Toner Fusing/Sleeking Foil - 3" Core (PNK-50-3-12)

    • Add an array of optical effects to your project without the trouble and expense of foil die creation
    • Sleeking is a new and improved way of foil stamping. It gives you the option to apply gloss or matte metallic colored film overlays, and holographic effects for full image, spot image and background image printing.
    • Can be used with a roll laminator with 3 inch core for sleeking applications.
    • Perfect for making business cards, invitations, greetings cards, certificates, and more
    • Color: Hot Pink Metallic
    Part #: PNK-50-3-12

    $85.345

  19. Hot Pink Metallic 21" x 500' Toner Fusing/Sleeking Foil - 3" Core (PNK-50-3-21)

    • Add an array of optical effects to your project without the trouble and expense of foil die creation
    • Sleeking is a new and improved way of foil stamping. It gives you the option to apply gloss or matte metallic colored film overlays, and holographic effects for full image, spot image and background image printing.
    • Can be used with a roll laminator with 3 inch core for sleeking applications.
    • Perfect for making business cards, invitations, greetings cards, certificates, and more
    • Color: Hot Pink Metallic
    Part #: PNK-50-3-21

    $197.30

  20. GBC Octiva Hot Mount Adhesive 38" x 150' (3" Core) (9300712)

    • Film Type: GBC Hot Mount Adhesive
    • Thickness: n/a
    • Roll Width: 38"
    • Roll Length: 150'
    • Film Finish: n/a
    Part #: 9300712

    $429.49

  21. GBC Octiva Hot Mount Adhesive 51" x 150' (3" Core) (9300713)

    • Film Type: GBC Hot Mount Adhesive
    • Thickness: n/a
    • Roll Width: 51"
    • Roll Length: 150'
    • Film Finish: n/a
    Part #: 9300713

    $360.77

  22. GBC Octiva Hot Mount Adhesive (3" Core) (GBCHMA3)

    • Film Type: GBC Hot Mount Adhesive
    • Roll Width: 38" - 51"
    • Roll Length: 150'
    • Core Size: 3"
    • 38" and 51" widths available
    Part #: GBCHMA3

    $360.77

  23. Xyron 4400 Two-Sided Matte Thermal Laminate - 300' (100139)

    • Roll Set Type: Matte Two Sided Lamination
    • Length: 300'
    • Width: 43"
    • Thickness: 2 mil
    • Hot or Cold: Cold
    Part #: 100139

    $411.41

  24. Xyron 4400 Matte Laminate / High Tack Adhesive 42" x 300' (624668)

    • Roll Set Type: One Side Matte Laminate / One Side High Tack Adhesive
    • Length: 300'
    • Width: 42"
    • Thickness: 2 mil
    • Hot or Cold: Cold
    Part #: 624668

    $667.00

  25. Hot Pink Metallic Toner Fusing/Sleeking Foil - 3" Core (PNK-50-3)

    • Add an array of optical effects to your project without the trouble and expense of foil die creation
    • Sleeking is a new and improved way of foil stamping. It gives you the option to apply gloss or matte metallic colored film overlays, and holographic effects for full image, spot image and background image printing.
    • Can be used with a roll laminator with 3 inch core for sleeking applications.
    • Perfect for making business cards, invitations, greetings cards, certificates, and more
    • Color: Hot Pink Metallic
    Part #: PNK-50-3

    $85.35

  26. Hot Pink Metallic 8" x 100' Laminating / Toner Fusing Foil (PNK-50-8)

    • Item: PNK-50-8
    • Color: Hot Pink Metallic
    • Width: 8"
    • Roll Length: 100'
    • Core Size: 1/2"
    Part #: PNK-50-8

    $28.82

  27. Hot Pink Metallic 12" x 100' Laminating / Toner Fusing Foil (PNK-50-12)

    • Item: PNK-50-12
    • Color: Hot Pink Metallic
    • Width: 12"
    • Roll Length: 100'
    • Core Size: 1/2"
    Part #: PNK-50-12

    $45.79

  28. Hot Pink Metallic 24" x 500' Laminating / Toner Fusing Foil (PNK-50-24)

    • Item: PNK-50-24
    • Color: Hot Pink Metallic
    • Width: 24"
    • Roll Length: 500'
    • Core Size: 1"
    Part #: PNK-50-24

    $143.88

  29. Hot Pink Metallic Laminating / Toner Fusing Foil (MYPNK-50)

    • Color: Hot Pink Metallic
    • Width: 8", 12", or 24"
    • Roll Length: 100'
    • Core Size: 1/2"
    • 8", 12", or 24" widths available
    Part #: MYPNK-50

    $28.82

  30. PoleTape 20mil 1/2" x 200' Roll for Hanging Pole Banners (POLE0520)

    • Aggressive pure adhesive film use to make pole pocket hems.
    • Super strong adhesive.
    • Goes on like tape but sticks like hot melt glue.
    • Just apply PoleTape along the top and bottom edge of your banner.
    • Dimensions: 1/2" x 200'
    Part #: POLE0520

    $75.00

Items 1-15 of 22

Display Type List Grid

Related Categories