Industrial Laminator

Page
  1. Ledco HD 25 Workhorse 25" Laminator with Stand (7025500)

    • Intelligent heat controllers. These heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
    • Laminating and pull rollers. These rollers are covered with quality silicone rubber for superior release quality, higher lamination quality, and easier cleaning. The laminating rollers and pull rollers are interchangeable.
    • Removable heat shoes. These shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
    • Built-in retractable slitters. These slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
    • Dual tension knobs. The dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
    Part #: 7025500

    $10794.00

  2. Ledco Heavy Duty 20" Hot Roll Laminator with Stand (H20)

    • Variable speed. The laminator operates at any speed up to 10 feet / 3 meters per minute. Thicker hot films are generally applied better at mid-range to lower speeds, while 1.5 mil hot films should be applied at mid-range to higher speeds.
    • Attached safety shield. The polycarbonate shield is clear so operators can see their work. It does not conduct heat so they’ll be protected from hot areas. It is fixed to the laminator and the machine will not run if the feed tray and safety shield are not in place.
    • Lamination pressure. The rubber rollers are spring-loaded and preset to ensure correct and even lamination pressure. The pressure is easy to adjust if required when performing routine maintenance.
    • Ease of cleaning. The heated silicone rubber laminating rollers, and the silicone rubber pull rollers of the laminator should be cleaned regularly. The safety shield (see below) on the laminator swings away in seconds, making it easy to clean the laminating rollers.
    • Precision Heat Controls. Individual top and bottom heat controls, as used on our other Digital Laminators, allow for even, consistent heating of the laminating rollers throughout the entire temperature range.
    Part #: H20

    $12186.67

  3. Ledco Heavy Duty 15" Roll Laminator with Automatic Feeder (HDF-15)

    • HD 15 Features:
    • Independent, intelligent heat controls display both set and actual temperature. Control microprocessor learns to anticipate the heat demand of each job and maintains within a few degrees of the set temperature.
    • Driven, interchangeable silicone laminating and pull rollers provide superior release, high laminating quality, and easy cleaning while avoiding the wrinkling that can occur with only one driven roller.
    • Built in retractable slitters save labor time by automatically trimming side scrap during the laminating process. Slitter head can be adjusted precisely and independently.
    • Large film roll capacity.
    Part #: HDF-15

    $13616.47

  4. Hop Industries 27" School Roll Laminator (TCC-EASY1)

    • Laminates up to 27" wide
    • Accommodates film thicknesses 1.5-3mil.
    • Easy preset temperature settings.
    • Laminates up to 60" per minute.
    • Reverse function.
    Part #: TCC-EASY1

    $998.99

  5. Polar Smart 38" Manual Cold Laminator/Mounter (CL38PS)

    • Media guide bar both helps to separate liners on laminating film as well as hold prints in place for bubble-free results.
    • Spring loaded rolls which insures proper pressure for mounting and laminating.
    • A single knob to easily adjust the roll height, set the same roll height every time. It’s easy to insures consistent parallel roll pressure.
    • Mount boards up to 1/4" thick.
    • Uses films on industry standard 3" cores.
    Part #: CL38PS

    $1348.00

  6. Z-Straps Black 1/2" x 23" Hook & Loop Vinyl Roll Straps - 10/Pack (ZS10BLK)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS10BLK

    $19.00

  7. Z-Straps Red 1/2" x 23" Hook & Loop Vinyl Roll Straps - 10/Pack (ZS10RED)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS10RED

    $19.00

  8. Z-Straps Blue 1/2" x 23" Hook & Loop Vinyl Roll Straps - 10/Pack (ZS10BLU)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS10BLU

    $19.00

  9. Z-Straps Yellow 1/2" x 23" Hook & Loop Vinyl Roll Straps - 10/Pack (ZS10YLW)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS10YLW

    $19.00

  10. Z-Straps 1/2" x 23" Hook & Loop Vinyl Roll Straps - 10/Pack (ZS10)

    • Available in 4 different colors.
    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    Part #: ZS10

    $19.00

  11. Z-Straps Black 7/16" x 23" Hook & Loop Vinyl Roll Straps - 5/Pack (ZS5BLK)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS5BLK

    $11.00

  12. Z-Straps Red 7/16" x 23" Hook & Loop Vinyl Roll Straps - 5/Pack (ZS5RED)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS5RED

    $11.00

  13. Z-Straps Blue 7/16" x 23" Hook & Loop Vinyl Roll Straps - 5/Pack (ZS5BLU)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS5BLU

    $11.00

  14. Z-Straps Yellow 7/16" x 23" Hook & Loop Vinyl Roll Straps - 5/Pack (ZS5YLW)

    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects.
    • High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS5YLW

    $11.00

  15. Z-Straps 7/16" x 23" Hook & Loop Vinyl Roll Straps - 5/Pack (ZS05)

    • Available in 4 different colors.
    • Great way to keep your valuable vinyl rolls off the ground and clean.
    • Specifically designed for the sign industry
    • Superior to masking tape, which can leave residue and causes print defects. High quality die-cut hook & loop material is adjustable and reusable.
    • Slotted for extra strength.
    Part #: ZS05

    $11.00

  16. Drytac ArmourPrint Emerytex 54" x 75' 15mil Clear Slip-Resistant Counter Mat Overlaminate (ARP54075)

    • A clear, 15 mil (381µ) heavyduty, slip resistant monomeric PVC film with a matte pebble textured finish on one side and a smooth printable surface on the other side.
    • Works together perfectly with ArmourGrab to create a counter mat solution ideal for fast food and retail industries.
    • By reverse-printing onto ArmourPrint Emerytex and pairing it with ArmourGrab, you can create eye-catching advertising mats for counters.
    • Non-slip for Convenience on Counters.
    • Certified for Incidental Food Contact.
    Part #: ARP54075

    $547.86

  17. Mactac Permacolor PermaTrans 61" x 150' Optically Clear Mounting Film (PUV2161W61L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2161W61L150

    $1515.75

  18. Mactac Permacolor PermaTrans 51" x 265' Optically Clear Mounting Film (PUV2151W51L265)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2151W51L265

    $1752.00

  19. Mactac Permacolor PermaTrans 51" x 150' Optically Clear Mounting Film (PUV2151W51L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2151W51L150

    $1124.00

  20. Mactac Permacolor PermaTrans 41" x 150' Optically Clear Mounting Film (PUV2141W41L150)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: PUV2141W41L150

    $958.00

  21. Mactac Permacolor PermaTrans Optically Clear Mounting Film (MACTAC-PUV21)

    • Features and Benefits:
    • Industry’s best clarity.
    • UV inhibitors reduce color fade.
    • Aggressive solvent acrylic adhesive.
    • Clear liners for inspection of product before lamination.
    Part #: MACTAC-PUV21

    $958.00

Items 1-15 of 22

Display Type List Grid

Related Categories