Low Temperature Adhesive

Page
  1. White 24" x 36" Thermal Adhesive Gator Boards - 10pk (MYB62340G)

    • 3/16" thick Gator foam board
    • Resists bowing and is stronger than regular Foam Board
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: 24" x 36"
    Part #: MYB62340G

    $404.89

  2. White Thermal Adhesive Gator Boards (MYBTAGAT-WHT)

    • 3/16" thick Gator foam board
    • Resists bowing and is stronger than regular Foam Board
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBTAGAT-WHT

    $404.89

  3. Black Thermal Adhesive Gator Boards (MYBTAGAT-BLK)

    • 3/16" thick Gator foam board
    • Resists bowing and is stronger than regular Foam Board
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBTAGAT-BLK

    $433.79

  4. MountCor Low Temp Heat Activated Mounting Board - 24" x 36" White 3/16" Foam 25pk (80MCBW3162436)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCBW3162436

    $177.99

  5. MountCor Low Temp Heat Activated Mounting Board - 25" x 37" White 3/16" Foam 10pk (80MCBW3162537)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCBW3162537

    $135.19

  6. MountCor Low Temp Heat Activated Mounting Board - 32" x 40" White 3/16" Foam 25pk (80MCBW3163240)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCBW3163240

    $251.09

  7. MountCor Low Temp Heat Activated Mounting Board - 36" x 48" White 3/16" Foam 25pk (80MCBW3163648)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCBW3163648

    $355.99

  8. MountCor Low Temp Heat Activated Mounting Board - 40" x 60" White 3/16" Foam 25pk (80MCBW3164060)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCBW3164060

    $449.19

  9. MountCor Low Temp Heat Activated Mounting Boards - White 3/16" Foam (MY80MCBW316)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: MY80MCBW316

    $135.19

  10. MountCor Low Temp Heat Activated Mounting Board - 24" x 36" Black 3/16" Foam 25pk (80MCB3162436)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: 80MCB3162436

    $257.79

  11. MountCor Low Temp Heat Activated Mounting Boards - Black 3/16" Foam (MY80MCBB316)

    • Low 130°F Temperature.
    • Runs up to three times faster then other heat activated boards.
    • 3/16" thick foam board.
    • Permanent bond adhesive.
    • Safe for all types of digital images.
    Part #: MY80MCBB316

    $257.79

  12. White ProSeal 18.5" x 25" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC18WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 220 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 18.5" width
    Part #: MYBC18WHT

    $112.99

  13. White ProSeal 36" x 48" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC36WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 220 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36" width
    Part #: MYBC36WHT

    $336.99

  14. White ProSeal 25" x 37" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM25WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBM25WHT

    $211.99

  15. White ProSeal 36" x 48" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM36WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBM36WHT

    $378.39

  16. Black ProSeal 25" x 37" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC25BLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25" width
    Part #: MYBC25BLK

    $208.79

  17. Black ProSeal 36" x 48" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC36BLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36" width
    Part #: MYBC36BLK

    $385.49

  18. White 25" x 37" Thermal Activated Foam Core Mounting Boards - 10pk (MB25)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MB25

    $129.79

  19. White 36" x 48" Thermal Activated Foam Core Mounting Boards - 10pk (MB36)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MB36

    $250.59

  20. White ProSeal 41" x 61" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC41WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 41" width
    Part #: MYBC41WHT

    $467.29

  21. White 24" x 36" Heavy Duty 1/4" Thick Gloss Pouch Laminating Boards - 10pk (MYB62305HD)

    • 1/4" thick Heavy Duty foam board
    • Resists bowing and is stronger than regular Foam Board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    Part #: MYB62305HD

    $335.19

  22. White 24" x 36" Gloss Gator Pouch Boards - 10pk (MYB62305G)

    • 3/16" thick Gator foam board
    • Resists bowing and is stronger than regular Foam Board
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: 24" x 36"
    Part #: MYB62305G

    $529.69

  23. White 36" x 48" Gloss Gator Pouch Boards - 5pk (MYB62306G)

    • 3/16" thick Gator foam board
    • Resists bowing and is stronger than regular Foam Board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    Part #: MYB62306G

    $490.99

  24. White 36" x 48" Heavy Duty 1/4" Thick Gloss Pouch Laminating Boards - 5pk (MYB62306HD)

    • 1/4" thick Heavy Duty foam board
    • Resists bowing and is stronger than regular Foam Board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    Part #: MYB62306HD

    $341.79

  25. Black ProSeal Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBCBLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBCBLK

    $208.79

  26. White ProSeal 11.5" x 17.5" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM1117WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 11.5 inch width
    Part #: MYBM1117WHT

    $40.69

  27. White Heavy Duty 1/4" Thick Gloss Pouch Laminating Boards (MYB6230HD)

    • 1/4" thick Heavy Duty foam board
    • Resists bowing and is stronger than regular Foam Board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    Part #: MYB6230HD

    $335.19

  28. Black ProSeal 36" x 48" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM36BLK)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBM36BLK

    $425.19

  29. White ProSeal 11.5" x 17.5" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM11WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 11.5 inch width
    Part #: MYBSM11WHT

    $44.79

  30. White ProSeal 18.5" x 25" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM18WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 18.5 inch width
    Part #: MYBSM18WHT

    $275.79

Items 1-15 of 22

Display Type List Grid