Mactac Brands

Page
  1. Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Self-Wetting Rem Mounting Film (CT2554W54L150)

    • Physical Properties Property Typical Values Test Method Thickness, inches (µm) Carrier plus adhesive Total product 0.0032 (81) 0.007 (178) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Glass - 30 minutes 4.6 (17.5) 1.0 (5.2) 5.2 (22.7) 1.0 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 300°F (-29° to 150°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Durability CT2500 will give satisfactory performance for up to 3 years outdoor. Indoor durability can be up to 20 years under standard conditions and with high quality printing inks.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    Part #: CT2554W54L150

    $628.29

  2. Mactac Permacolor ColorTrans Optically Clear 61" x 150' Perm/Rem Mounting Film (CT2261L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2261L150

    $631.90

  3. Mactac Permacolor ColorTrans Optically Clear 54" x 150' Perm/Rem Mounting Film (CT2254L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2254L150

    $561.49

  4. Mactac Permacolor ColorTrans Optically Clear 51" x 150' Perm/Rem Mounting Film (CT2251L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2251L150

    $531.49

  5. Mactac Permacolor ColorTrans Optically Clear 41" x 150' Perm/Rem Mounting Film (CT2241L150)

    • Physical Properties Property Typical Values Test Method Thickness in inches Carrier plus adhesive Total product 0.0037 (94) 0.0067 (170) ASTM D-645 Quick Tack lb. /in² (N/25mm) Stainless Steel Permanent Removable 2.8 (12.3) 2.5 (11) Mactac CTM-25 Peel Adhesion lb./in. (N/25 mm) Stainless Steel - 30 minutes Stainless Steel – 24 hours 4.0 (17.5) 1.2 (5.2) 5.2 (22.7) 1.6 (7.0) PSTC - 3 Shear, Hours to Fail Stainless Steel 100+ 24+ PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -40° to 185°F (-40° to 85°C)
    • Shelf Life Two years when stored at 75°F (24°C) and 50% relative humidity or less. Note: Mactac recommends that rolls be stored on end or suspended from the core.
    • Removability This product has 6 month removability after application from glass, Plexiglas and acrylic sheeting. The removability of CT2500 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.
    • Limitations 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide. 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations. 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.
    • General Comments
    Part #: CT2241L150

    $431.19

  6. Mactac Permacolor PermaPrint White 54" x 150' Perm/Perm Back Mounting Film (IP5040)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5040

    $562.89

  7. Mactac Permacolor PermaPrint White 51" x 400' Perm/Perm Back Mounting Film (IP5001)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5001

    $1058.89

  8. Mactac Permacolor PermaPrint White 51" x 150' Perm/Perm Back Mounting Film (IP5002)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5002

    $445.89

  9. Mactac Permacolor PermaPrint White 38" x 150' Perm/Perm Back Mounting Film (IP5008)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5008

    $340.59

  10. Mactac Permacolor PermaPrint White 37" x 150' Perm/Perm Back Mounting Film (IP5007)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5007

    $333.59

  11. Mactac Permacolor PermaPrint White 25" x 150' Perm/Perm Back Mounting Film (IP5015)

    • Features and Benefits:
    • One paper release liner allows for fast lamination
    • Typical Uses:
    • Mounting of images to black gator, Sintra and other typical mounting substrates
    • Physical Properties Property Typical Values Test Method Thickness mils (mm) Adhesive Carrier and Adhesive 1/1 (0.028/0.028) 4.5 (0.114) ASTM D-645 Peel Adhesion, lb. /in. (N/25 mm) Stainless Steel - 30 min. - 24 hr. 3.5 (19) 4.0 (22) PSTC - 3 Quick Tack lb. /in² (N/25mm) Stainless Steel 4.4 (17.5) MACtac CTM-25 Shear, Hours to Fail Stainless Steel 150 PSTC - 7 Temperature Ranges Application for best results: End Use: 50° to 120°F (10° - 49°C) -20° to 200°F (-30° to 93°C) Adhesive pH Neutral TAPPI-529
    Part #: IP5015

    $237.69

  12. Mactac Permacolor ColorGard LUV 3.2mil 60" x 150' Gloss Clear Digital PS Overlaminate (LUV8060W60L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8060W60L150

    $356.50

  13. Mactac Permacolor ColorGard LUV 3.2mil 38" x 150' Gloss Clear Digital PS Overlaminate (LUV8038W38L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8038W38L150

    $233.11

  14. Mactac Permacolor ColorGard LUV 3.2mil 51" x 150' Gloss Clear Digital PS Overlaminate (LUV8051W51L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8051W51L150

    $306.01

  15. Mactac Permacolor ColorGard LUV 3.2mil 54" x 150' Gloss Clear Digital PS Overlaminate (LUV8054W54L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8054W54L150

    $322.86

  16. Mactac Permacolor ColorGard LUV 3.2mil 60" x 150' Matte Clear Digital PS Overlaminate (LUV8238W38L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8238W38L150

    $233.11

  17. Mactac Permacolor ColorGard LUV 3.2mil 38" x 150' Matte Clear Digital PS Overlaminate (LUV8251W51L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8251W51L150

    $233.11

  18. Mactac Permacolor ColorGard LUV 3.2mil 51" x 150' Matte Clear Digital PS Overlaminate (LUV8254W54L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8254W54L150

    $322.86

  19. Mactac Permacolor ColorGard LUV 3.2mil 54" x 150' Matte Clear Digital PS Overlaminate (LUV8260W60L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8260W60L150

    $356.50

  20. Mactac Permacolor ColorGard LUV 3.2mil 60" x 150' Lustre Clear Digital PS Overlaminate (LUV8360W60L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8360W60L150

    $233.11

  21. Mactac Permacolor ColorGard LUV 3.2mil 38" x 150' Lustre Clear Digital PS Overlaminate (LUV8338W38L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8338W38L150

    $306.01

  22. Mactac Permacolor ColorGard LUV 3.2mil 51" x 150' Lustre Clear Digital PS Overlaminate (LUV8351W51L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8351W51L150

    $322.86

  23. Mactac Permacolor ColorGard LUV 3.2mil 54" x 150' Lustre Clear Digital PS Overlaminate (LUV8354W54L150)

    • Features and Benefits:
    • Five to seven year outdoor durability
    • Excellent adhesive wet-out for no silvering
    • Suitable for UV, solvent, latex and eco-solvent printed graphics
    • Protection against UV light, moisture and abrasion
    Part #: LUV8354W54L150

    $356.50

  24. Mactac Permacolor PromoGard 3.5mil 60" x 150' Gloss Clear Digital PS Overlaminate (PG7060)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7060

    $250.00

  25. Mactac Permacolor PromoGard 3.5mil 54" x 150' Gloss Clear Digital PS Overlaminate (PG7054)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7054

    $226.99

  26. Mactac Permacolor PromoGard 3.5mil 51" x 150' Gloss Clear Digital PS Overlaminate (PG7051)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7051

    $215.49

  27. Mactac Permacolor PromoGard 3.5mil 60" x 150' Matte Clear Digital PS Overlaminate (PG7260)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7260

    $250.00

  28. Mactac Permacolor PromoGard 3.5mil 54" x 150' Matte Clear Digital PS Overlaminate (PG7254)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7254

    $226.99

  29. Mactac Permacolor PromoGard 3.5mil 51" x 150' Matte Clear Digital PS Overlaminate (PG7251)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7251

    $215.49

  30. Mactac Permacolor PromoGard 3.5mil 60" x 150' Lustre Clear Digital PS Overlaminate (PG7360)

    • Features and Benefits:
    • Suitable for use over solvent, eco-solvent, UV and latex printed wide-format graphics
    • Up to four years outdoor durability
    • Typical Uses:
    • Protection of short-term indoor and outdoor graphics
    Part #: PG7360

    $250.00

Items 1-15 of 22

Display Type List Grid

Related Categories