Manual Challenge Paper Cutter

Page
  1. Challenge Spartan 150M 15.75" Manual Heavy-Duty Paper Cutter (CH-SPARTAN150M)

    • Cutting: Manual - Hand Lever Operation
    • Clamping: Manual - Hand-Crank. The hand-crank design for clamping creates a much higher clamping force than the lever design which results in a better quality cut.
    • LED Digital Backgauge Position Indicator with +/-0.01" (+/-0.1mm) Backgauge Accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used in other brands.
    • Laser Red LED Cut Line Light - produces a very sharp, easy to see cut line without the replacement problems of incandescent bulbs.
    • Front Safety Shield interlocked with the cutting lever - provides protection for the operator during operation.
    Part #: CH-SPARTAN150M

    $2745.00

  2. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  3. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  4. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  5. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  6. Challenge Spartan 185AEP 18.5' Electronic Programmable Cutter (CH-SPARTAN185AEP)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Electric Powered Backgauge: Controlled by the electronic console with handwheel for micro adjustments
    • 3" Lighted LCD Display: Displays backguague location with +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Programmable: Operator friendly software uses soft key menu prompts for easy programming. During a program the 3" LCD displays up to 5 consecutive cuts to aid the operator in navigating a job.
    Part #: CH-SPARTAN185AEP

    $11495.00

  7. Challenge Titan 200 20" Hydraulic Programmable Cutter with Shield (CH-TITAN200)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200

    $14995.00

  8. Challenge Titan 200 20" Hydraulic Programmable Cutter with Light Beams (CH-TITAN200L)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200L

    $16695.00

Items 1-15 of 22

Display Type List Grid

Related Categories