Manual Paper Cutters

Page
  1. MBM Triumph 4305 16.875" Tabletop Manual Paper Cutter - CU0450L (MB-4305)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Patented Fast-Action Clamp : After inserting the paper stack, throw the lever on the fast-action clamp to tighten—then cut.
    • Precision Back Gauge : The cast aluminum back gauge and side guide with measurement scale allows precise paper alignment.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4305

    $1889.00

  2. Formax Cut-True 15M 17" Manual Paper Cutter (FDCT15M)

    • Guillotine cutter accurately cuts through paper stacks up to 2.15" high, up to 16.9" wide
    • LED Laser cut line for pinpoint accuracy
    • High-quality steel blade
    • Front and rear safety covers
    • Manual lever cutting arm
    Part #: FDCT15M

    $1487.50

  3. Formax Cut-True 16M 18.7" Manual Paper Cutter (FDCT16M)

    • Guillotine cutter accurately cuts through paper stacks up to 3.15" high, up to 18.7" wide
    • LED Laser cut line for pinpoint accuracy
    • High-quality steel blade
    • Front and rear safety covers
    • Manual lever cutting arm
    Part #: FDCT16M

    $2337.50

  4. Formax Cut-True 13M 14.5" Tabletop Manual Paper Cutter (Cut-True-13M)

    • Guillotine cutter accurately cuts through paper stacks up to .75" high, up to 14.5" wide
    • LED Laser cut line for pinpoint accuracy
    • High-quality steel blade
    • Front and rear safety covers
    • Two-handed cutter arm and safety switch operation
    Part #: Cut-True-13M

    $598.00

  5. MBM Triumph 4705 18.75" Tabletop Manual Paper Cutter - CU0462L (MB-4705)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Spindle Clamp With Hand Wheel : The hand wheel is used to apply even clamping pressure along the entire cutting width.
    • Measurement Scale : The precision measurement scale on the front table allows precise back gauge positioning.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4705

    $3469.00

  6. MBM Triumph 4300 16.875" Tabletop Manual Paper Cutter (MB-4300)

    • SCS (Safety Cutting System) features
    • Hinged, transparent safety guard on front table with locking device for the blade lever (a cut can only be executed if the safety guard is completely closed
    • Transparent safety cover on rear table
    • Blade change from front without removing machine covers
    • Blade changing device covers cutting edge of blade
    Part #: MB-4300

    $1049.00

  7. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter (CH-SPARTAN150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150SA

    $4745.00

  8. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA)

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  9. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  10. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  11. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  12. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  13. Dahle Model 534 Professional 18 Inch Guillotine Paper Cutter - Open Box (MYR-19-085-8)

    • Cuts up to 15 sheets of paper at a time (212-218)
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    • Sturdy metal base with preprinted guides
    Part #: MYR-19-085-8

    $58.93

  14. Lassco Wizer Cornerounder Manual Corner Cutter (CR-50)

    • The Model CR-50 Corner Rounder floor model is for large operations.
    • Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
    • Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
    • Corner Rounder Weight 50 lbs.
    • Designed to cut paper and plastic
    Part #: CR-50

    $849.15

  15. Martin Yale 18" Manual Ream Cutter (620RC)

    • Manual paper clamp allows for additional stack pressure
    • Precise hand crank back gauge
    • Standard English and metric rulers for accuracy
    • Battery operated cutting light
    • Legs adjust up to 11/2" to facilitate leveling
    Part #: 620RC

    $2429.00

  16. Dahle Model Professional 12 Inch Guillotine Paper Cutter (533)

    • Cuts up to 15 sheets of paper at a time
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    • Sturdy metal base with preprinted guides
    Part #: 533

    $84.89

  17. Dahle Model Professional 18 Inch Guillotine Paper Cutter (534)

    • Cuts up to 15 sheets of paper at a time (212-218)
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    • Sturdy metal base with preprinted guides
    Part #: 534

    $117.85

  18. Challenge Spartan 150M 15.75" Manual Heavy-Duty Paper Cutter (CH-SPARTAN150M)

    • Cutting: Manual - Hand Lever Operation
    • Clamping: Manual - Hand-Crank. The hand-crank design for clamping creates a much higher clamping force than the lever design which results in a better quality cut.
    • LED Digital Backgauge Position Indicator with +/-0.01" (+/-0.1mm) Backgauge Accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used in other brands.
    • Laser Red LED Cut Line Light - produces a very sharp, easy to see cut line without the replacement problems of incandescent bulbs.
    • Front Safety Shield interlocked with the cutting lever - provides protection for the operator during operation.
    Part #: CH-SPARTAN150M

    $2745.00

  19. MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490)

    • Transparent Safety Guard. A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0490

    $11549.00

  20. MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0491

    $13859.00

  21. Dahle Model Professional 13-3/8" Guillotine Paper Cutter (560)

    • Cuts up to 25 sheets of paper at a time
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    • Sturdy metal base with preprinted guides
    Part #: 560

    $171.99

  22. MBM Triumph 5560 21-5/8" Programmable Hydraulic Paper Cutter with VRCut Software - V (CU0493)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0493

    $17499.00

  23. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497

    $20999.00

  24. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $24999.00

  25. Challenge Refurbished Spartan 150SA Semi Automatic Electric Paper Cutter (MY150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: MY150SA

    $2995.00

  26. Swingline ClassicCut CL800pro 11.75" Guillotine Paper Cutter (SWI-1500)

    • Guillotine cutting of up to 150 sheets of 20 lb. paper at once; 11 3/4" cutting length
    • Full-width handle for ultimate leverage
    • Battery powered light illuminates cutting area to increase accuracy
    • Limited 10-year warranty
    • Cut Length: 11.75"
    Part #: SWI-1500

    $657.85

  27. Tamerica Guillo-Max 17" Guillotine Stack Paper Cutter (360 Sheets) (TGUILLOMAX)

    • Capable of smoothly cutting up to 360 sheets of printer paper at a time.
    • The all metal construction on this unit ensures durability, dependability and consistency.
    • Manually Adjustable Back Gauge.
    • Manual Cutting and Clamp Operation.
    • 1 Year Warranty.
    Part #: TGUILLOMAX

    $349.00

  28. Dahle 43" Premium Large Format Guillotine Paper Cutter (585)

    • Cuts up to 30 sheets of paper at a time
    • Industrial size guillotine equipped to handle large format work
    • Ground self-sharpening blade made of Solingen Steel is lockable to prevent unauthorized use
    • Acrylic safety shield separates hand from blade
    • Manual foot clamp holds work securely in place and prevents shifting
    Part #: 585

    $2049.50

  29. HSM G4620 18.11" Guillotine Paper Cutter (HSM-1000912)

    • 18.11" cutting length; cuts up to 20 documents/sheets of paper
    • Precise and hand-guarded side stop for accurate cutting edges
    • Handle ergonomically designed for optimal action of force
    • Solid base plate with scaling in centimeters/inches, angles, and conventional formats
    • Easy-to-handle, manual integrated clamping at the cutting edge with hand guard
    Part #: HSM-1000912

    $148.00

  30. HSM G4640 18.11" Guillotine Paper Cutter (HSM-1000914)

    • 18.11" cutting length; cuts up to 40 documents/sheets of paper
    • Precise and hand-guarded side stop for accurate cutting edges
    • Handle ergonomically designed for optimal action of force
    • Solid base plate with scaling in centimeters/inches, angles, and conventional formats
    • Easy-to-handle, manual integrated clamping at the cutting edge with hand guard
    Part #: HSM-1000914

    $222.69

Items 1-15 of 22

Display Type List Grid

Related Categories