Modular Interchangeable Die Binding Punch

Page
  1. Akiles Electric Modular Interchangeable Die Binding Punch (FLEXIPUNCH-E)

    • High Volume Punching Capacity : The heavy duty electric punching mechanism can handle up to twenty sheets of 20lb paper per cycle. Plus, the FlexiPunch-E offers a foot pedal control that allows for two handed punching.
    • Heavy-Duty Punching Motor: The FlexiPunch-E offers a heavy duty commercial quality electric punching motor that provides more than enough punch power for all die sets and punching patterns.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : Allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    Part #: FLEXIPUNCH-E

    $1399.00

  2. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $440.99

  3. GBC MP2500ix Modular InterChangable Die Punch (7704300)

    • Also known as the Ibico 640ID Interchangeable Die Punch
    • Vertical punch throat eliminates punching skew, providing a more consistent punch.
    • Three LED's indicate Power ON, correct die placement, and chip tray full warning.
    • Choose your preferred punching method from an ergonomic palm switch or hands-free foot pedal.
    • Ten die sets interchange in seconds without tools or levers.
    Part #: 7704300

    $1852.67

  4. Rhin-O-Tuff ONYX Heavy Duty Punch (4000PLUS)

    • The OD ONYX 4000PLUS Punch Comes With An Auto Reversing Feature That Prevents Jams.
    • All Dies for the ONYX 4000PLUS Feature Rhin-O-Tuff's Ingenious Patented Swing Away Die Pin Retainer System. Allows Quick Access to all Die Punch Pins while Holding them Firmly in Place. Easily Disengage Any Die Punch Pin.
    • 12 Standard Interchangeable Die Patterns Available. Including dies for comb binding, wire binding, plastic coil binding, Velobind and 3 hole loose leaf
    • Easy, "Paper to Pin" Sight Alignment, For Balanced Hole to Edge Margins on Odd-Sized Applications.
    • Punching Capacity Rated up to 20 Sheets of 20 lb. or 80gsm. The Number of Sheets Depends on the Paper Weight and Punch Pattern Used.
    Part #: 4000PLUS

    $1848.85

  5. Tamerica Versabind-E Modular Electric Binding Machine (TP-VERSABINDE)

    • Punch Capacity of 20 sheets of 20lb paper
    • Comes with 4 die sets
    • Punch and Binding length up to 14" (13" with 4:1 Coil Binding)
    • 24 Fully Disengageable Pins
    • Interchangeable Die set system (Plastic Combs, 3:1 Wire, 2:1 Wire, 4:1 Coil)
    Part #: TP-VERSABINDE

    $1619.00

  6. Tamerica Versabind Modular Manual Binding Machine (TP-VersaBindM)

    • Punch Capacity of 20 sheets of 20lb paper
    • Punch and Binding length up to 14" (13" with 4:1 Coil Binding)
    • 24 Fully Disengageable Pins
    • Comes with 4 die sets
    • Interchangeable Die set system (Plastic Combs, 3:1 Wire, 2:1 Wire, 4:1 Coil)
    Part #: TP-VersaBindM

    $1159.00

  7. GBC Magnapunch Pro Colorcoil 4:1 .2475 Pitch Die Set (7705649)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a 4:1 (.2475) coil binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Ensures that punched holes do not overrun top and bottom of page.
    Part #: 7705649

    $799.89

  8. GBC Magnapunch Pro Colorcoil 4:1 .250 Pitch Die Set (7705650)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a 4:1 (.250) coil binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Punch Pattern: Colorcoil 4:1 .250 Pitch
    Part #: 7705650

    $799.89

  9. GBC Magnapunch Pro Colorcoil 4:1 Oversized Oval Die Set (7705651)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a 4:1 (.2475) coil binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Oversized oval punch holes for spines over 20 mm; required for DigiCoil.
    Part #: 7705651

    $1714.89

  10. GBC Magnapunch Pro CombBind 19-Hole Die Set (7705644)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a 19-hole comb binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 39 sheets at a time with a 14 inch maximum document width.
    • Used with GBC Magnapunch Pro Item #7705643 sold separately.
    Part #: 7705644

    $799.89

  11. GBC Magnapunch Pro WireBind 3:1 Square Hole Die Set (7705645)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Square punch pattern; required for spine up to 9/16".
    Part #: 7705645

    $768.57

  12. GBC Magnapunch Pro WireBind 3:1 Round Hole Die Set (7705647)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a round 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 34 sheets at a time with a 14 maximum document width.
    • Round punch pattern; required for spine up to 9/16".
    Part #: 7705647

    $799.89

  13. GBC Magnapunch Pro WireBind 2:1 Square Hole Die Set (7705646)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square 2:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 34 sheets at a time with a 14 maximum document width.
    • Square punch pattern; required for spine over 5/8".
    Part #: 7705646

    $799.89

  14. GBC Magnapunch Pro WireBind 2:1 Round Hole Die Set (7705648)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a round 2:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 34 sheets at a time with a 14 maximum document width.
    • Round punch pattern; required for spine over 5/8"
    Part #: 7705648

    $799.89

  15. GBC Magnapunch Pro Wire Calendar 3:1 Square Hole Die Set (4401994)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square punch pattern with half-circle cut out in center 3:1 wire binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 29 sheets at a time with a 14 maximum document width.
    • Square punch pattern with half-circle cut out in center. Wire.
    Part #: 4401994

    $799.89

  16. GBC Magnapunch Pro Proclick Pronto 3:1 Die Set (7705652)

    • Locks right into the GBC Magnapunch Pro Interchangeable Die Punch for a perfect punch every time.
    • Punches clean, professional holes in paper and plastic covers with a square binding punch pattern.
    • Designed with a durable metal construction for lasting reliability.
    • Punches up to 24 sheets at a time with a 12" maximum document width.
    • For use with ProClick Pronto Binding Systems.
    Part #: 7705652

    $799.89

Items 1-15 of 22

Display Type List Grid

Related Categories