One Hole Paper Punch

Page
  1. Swingline High Capacity Heavy Duty 3-Hole Punch (SWI-74550)

    • Manual punch operation delivers 3-hole punching of clean 9/32" holes
    • 75 sheet paper punch capacity
    • One-touch punch pad adjustment extends punch head life
    • Removable chip tray
    • Antimicrobial product protection
    Part #: SWI-74550

    $108.14

  2. Swingline High Capacity Adjustable 2-3 Hole Punch (SWI-74650)

    • Specially engineered to make manual punching 30% easier than with comparable models
    • Impressive 160 sheet paper punch capacity; 2 or 3-holes
    • One-touch punch pad adjustment extends punch head life
    • Adjustable paper guide and removable chip tray
    • Able to punch either 9/32" or 11/32" holes. Replacement punch head kits are available.
    Part #: SWI-74650

    $194.34

  3. Akiles Electric Modular Interchangeable Die Binding Punch (FLEXIPUNCH-E)

    • High Volume Punching Capacity : The heavy duty electric punching mechanism can handle up to twenty sheets of 20lb paper per cycle. Plus, the FlexiPunch-E offers a foot pedal control that allows for two handed punching.
    • Heavy-Duty Punching Motor: The FlexiPunch-E offers a heavy duty commercial quality electric punching motor that provides more than enough punch power for all die sets and punching patterns.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : Allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    Part #: FLEXIPUNCH-E

    $1399.00

  4. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $440.99

  5. Master Hole Punch by Martin Yale (EP312)

    • Designed for easy use and hand held operation if desired
    • Enough power to last more than one year of average use
    • Easy to use button on top- just push and punch effortlessly
    • Punches 9/32" holes, fitting a standard 3-ring binder allowing for easy page turning with less tearing
    • Adjustable paper guide built in base, also has a large chip holder
    Part #: EP312

    $41.70

  6. Carl Medium-Duty 1/4" 1-Hole Punch (CUI61005)

    • Punches one 1/4" hole.
    • Features removable chip tray and 2" reach.
    • Removable chip receptacle and Comfortable foam handle.
    • Limited Lifetime Warranty.
    • Paper Punch Capacity: 10 Sheet
    Part #: CUI61005

    $11.35

  7. Business Source Handheld Ticket/Paper 1-Hole Punch (BSN62895)

    • Punches one 1/4" hole with a quick squeeze.
    • Chip receptacle for mess-free punching.
    • Nickel-plated.
    • Silver.
    • Product Type: Manual Hole Punch
    Part #: BSN62895

    $2.56

  8. Master Duo Hole Punch by Martin Yale (DP20)

    • One side is dedicated 2-hole punch, one side is dedicated 3-hole punch.
    • Punches up to 20 sheets of 20 lb. bond paper.
    • Punches two holes with the standard 2.75" from the centers of the holes.
    • High-capacity chip pan.
    • One side is dedicated 2-hole punch, one side is dedicated 3-hole punch
    Part #: DP20

    $31.05

  9. Filepecker FP-1B Manual Paper Hole Drill (MYFP1B)

    • Simple and easy multi-hole punching process by sliding the table
    • Punch up to an impressive 300 sheet of document at one time
    • Very little pressure needed to operate
    • Features a sliding table with adjustable stops providing an efficient work environment
    • Heavy-duty die-cast aluminium construction
    Part #: MYFP1B

    $257.30

  10. FP 1-XLS Paper Hole Drill with Moving Table (MYFP1XLS)

    • Simple and easy multi-hole punching process by sliding the table
    • Punch up to an impressive 300 sheet of document at one time
    • Very little pressure needed to operate
    • Capable to handle up to 14" wide paper
    • Features a sliding table with adjustable stops providing an efficient work environment
    Part #: MYFP1XLS

    $364.00

  11. James Burn BB400P Speedbind Automatic Inline Punch and Wire Binding Machine (04JBBB400P)

    • Binding speed up to 3,000 documents per hour, depending on the application and operator, making it one of the fastest automatic wire machines in its category.
    • Simple control panel for job setup.
    • Fully automatic punching and binding is completed with just 1 operator.
    • Maximum punching thickness of 4 mm.
    • Handles paper sizes from 4 5/8" x 4 5/8" up to 15 5/8" x 15 5/8".
    Part #: 04JBBB400P

    $114999.00

  12. GBC V800pro Velobind System One Binding Machine (9707023)

    • Binds documents up to 1" thick.
    • The lever on the System One manually punches holes into the document and activates the binding process.
    • The pressure bar firmly holds the document for a secure, professional bind.
    • An indicator light flashes during the binding process and goes out when the binding is complete.
    • Debris tray catches paper chips and binding strip fragments for easy disposal.
    Part #: 9707023

    $1757.00

  13. C-Line Red Two-Pocket Poly Portfolio Folder with Three-Hole Punch 25pk (CLI-32934)

    • Two-pocket heavyweight polypropylene folders with three-hole punch hold papers and resist tearing
    • Features three-hole punching for secure storage in standard 3-ring binders
    • Cut-outs at the top and bottom keep portfolio from being caught in binder open-close mechanism
    • Comes in 25/BX
    • This product will be cheerfully replaced with one of equal value if defective in materials, manufacturing or packaging at the time of purchase. Except for such replacement, this product is sold without warranty or liability even though defect, damage or loss is caused by negligence or other fault.
    Part #: CLI-32934

    $16.34

  14. C-Line Blue Two-Pocket Poly Portfolio Folder with Three-Hole Punch 25pk (CLI-32935)

    • Two-pocket heavyweight polypropylene folders with three-hole punch hold papers and resist tearing
    • Features three-hole punching for secure storage in standard 3-ring binders
    • Cut-outs at the top and bottom keep portfolio from being caught in binder open-close mechanism
    • Comes in 25/BX
    • This product will be cheerfully replaced with one of equal value if defective in materials, manufacturing or packaging at the time of purchase. Except for such replacement, this product is sold without warranty or liability even though defect, damage or loss is caused by negligence or other fault.
    Part #: CLI-32935

    $27.89

  15. Avery Assorted 7-Hole Punched Mini Plastic Binder Pockets for 5.5" x 8.5" Binders 5pk (AVE-75307)

    • Store papers in 5-1/2" x 8-1/2" binder without punching holes.
    • Holds up to 20 sheets.
    • Durable, non-stick polypropylene material resists tearing.
    • Includes one green, blue and clear pocket.
    • Color: Assorted
    Part #: AVE-75307

    $3.36

  16. Avery Assorted 7-Hole Punched Mini Plastic Fold Out Binder Pockets for 5.5" x 8.5" Binders 3pk (AVE-75308)

    • Store papers in 5-1/2" x 8-1/2" binder without punching holes.
    • Holds up to 20 sheets.
    • Durable, non-stick polypropylene material resists tearing.
    • Includes one green, blue and clear pocket.
    • Color: Assorted
    Part #: AVE-75308

    $5.21

  17. C-Line White Two-Pocket Poly Portfolio Folder with Three-Hole Punch 25pk (CLI-33937)

    • Two-pocket heavyweight polypropylene folders with three-hole punch hold papers and resist tearing
    • Features three-hole punching for secure storage in standard 3-ring binders
    • Cut-outs at the top and bottom keep portfolio from being caught in binder open-close mechanism
    • Comes in 25/BX
    • This product will be cheerfully replaced with one of equal value if defective in materials, manufacturing or packaging at the time of purchase. Except for such replacement, this product is sold without warranty or liability even though defect, damage or loss is caused by negligence or other fault.
    Part #: CLI-33937

    $27.89

  18. GBC Magnapunch Pro VeloBind 11-Pin Die Set (7705653)

    • Fits perfectly into the GBC MagnaPunch Pro and locks in for safe, consistent punches.
    • Designed with a durable metal construction for lasting reliability.
    • Punch holes are compatible with GBC Velobind spines.
    • Punches up to 49 sheets of 20lb paper at one time with a 15" maximum document width.
    • Punch Pattern: VeloBind 11-Pin
    Part #: 7705653

    $711.56

  19. GBC Magnapunch Pro SureBind 10-Pin Die Set (7705654)

    • Fits perfectly into the GBC MagnaPunch Pro and locks in for safe, consistent punches.
    • Designed with a durable metal construction for lasting reliability.
    • Punch holes are compatible with GBC Velobind spines.
    • Punches up to 49 sheets of 20lb paper at one time with a 15" maximum document width.
    • Punch Pattern: SureBind 10-Pin
    Part #: 7705654

    $711.56

  20. Avery Manila Untabbed Double Pocket Dividers 5pk (AVE-03075)

    • Each divider features two convenient pockets, one on each side
    • Durable pockets offer ample room to store important papers
    • Tabless design lets you organize your papers without the distraction of tabs
    • Get free software and templates at avery.com
    • Three-hole punched for immediate use
    Part #: AVE-03075

    $2.55

  21. Avery Protect 'N Tab Tabbed Sheet Protectors Clear 5-Tab (AVE-74160)

    • Acid free and archival safe, won't lift print from your papers
    • Protects three-hole punched 8-1/2" x 11" papers
    • Five convenient tabs help you find your place quickly
    • Each sheet protector holds one sheet of paper
    • Includes five tabbed sheet protectors
    Part #: AVE-74160

    $5.21

  22. Avery Protect 'N Tab Tabbed Sheet Protectors Clear 8-Tab (AVE-74161)

    • Acid free and archival safe, won't lift print from your papers
    • Protects three-hole punched 8-1/2" x 11" papers
    • Eight convenient tabs help you find your place quickly
    • Each sheet protector holds one sheet of paper
    • Includes five tabbed sheet protectors
    Part #: AVE-74161

    $8.28

Items 1-15 of 22

Display Type List Grid

Related Categories