Paper Binding Tools

Page
  1. GBC Electric VeloBind Punch V110e Binding Machine (7704260)

    • Easy push-button punching for enhanced productivity (24 sheets)
    • Compatible with GBC EVB Reclosable 4 Pin Velobind Strips
    • Includes an opening and closing tool for Reclosable Velobind Strips
    • Swingline GBC VeloBind spines bind 200 sheets
    • Extra large throat accommodates standard and oversized paper
    Part #: 7704260

    $282.79

  2. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $622.49

  3. Fastbind Hard Cover Toolkit for Secura, Elite and Optima Perfect Binders (HDTKSTD)

    • Consist of a hardcover nipping bar and a special paper guide.
    • For use with Fastbind Secura, Elite and Optima Perfect Binders.
    • Speed up your work.
    • Easy placement for correct offset.
    • Nipping tools for hard and soft covers.
    Part #: HDTKSTD

    $189.00

  4. Fastbind Hard Cover Toolkit for Elite XT Perfect Binder (HDTKXT)

    • Consist of a hardcover nipping bar and a special paper guide.
    • For use with Elite XT Perfect Binder.
    • Speed up your work.
    • Easy placement for correct offset.
    • Nipping tools for hard and soft covers.
    Part #: HDTKXT

    $219.00

  5. Tamerica 6 in 1 Heavy Duty Corner Cutter (RCC-110)

    • With paper guide
    • With chip tray and tool/dies storage tray
    • Perfect for paper, binding covers, laminated badges, books & loose-leaf sheets
    • Packaged with 6 interchangeable dies (1/8", 1/4", 3/8", Straight, Half-moon, and 1/4") and 1 paper guide
    • Specially designed to cut through multiple sheets at a time with ease and minimal die wear
    Part #: RCC-110

    $204.79

Items 1-15 of 22

Display Type List Grid