Paper Cutter Clamps

Page
  1. Premium 15 Inch Magnetic Paper Cutter Clamp Pad - 2 pk (JH-CP1000)

    • Durable foam pad
    • Strong rubberized magnetic base
    • Width: 3"
    • Length: 15"
    • Quantity: 2 per box
    Part #: JH-CP1000

    $32.00

  2. Standard Electric 17" Desktop Paper Cutter (PC-P430)

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $5490.00

  3. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450)

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $7350.00

  4. Challenge Titan 200BC 20" Hydraulic Paper Cutter with Tilt Shield (CH-TITAN200BC)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has clear plexiglass shield that you have to flip down in order for the cutter to work
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Plexiglas Safety Shield.
    Part #: CH-TITAN200BC

    $11595.00

  5. MBM Triumph 4315 16.875" Semi-Automatic Tabletop Paper Cutter (CU0451)

    • Electric blade drive
    • Soligen steel blade
    • Solid steel blade carrier and adjustable blade guides
    • Patented, lever-activated, fast-action clamp
    • Precision side guide
    Part #: CU0451

    $4599.00

  6. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  7. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  8. Challenge Titan 200BC 20" Hydraulic Paper Cutter with Light Beam (TITAN200BCLB)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has laser light beams for safety that detect if anything is in the way
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Light Beam Curtain
    Part #: TITAN200BCLB

    $13595.00

  9. Challenge Titan 230 TC 23" Hydraulic Programmable Paper Cutter w/ Color Touch Screen Control (CH-TITAN230TC)

    • 10.5" Color Touch Screen
    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    Part #: CH-TITAN230TC

    $19995.00

  10. Challenge Champion 305 TC 30.5" Programmable Paper Cutter (CH-305TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening.
    • Hydraulic clamping and cutting.
    Part #: CH-305TC

    $33295.00

  11. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  12. Standard 25" Electric Paper Cutter (PC-640)

    • Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.
    • Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
    • Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety. Simple and safe operation suitable for office use.
    • Easy Operation - Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons.
    • Double Safety Circuit -The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
    Part #: PC-640

    $10250.00

  13. MBM Triumph 4305 16.875" Tabletop Manual Paper Cutter - CU0450L (MB-4305)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Patented Fast-Action Clamp : After inserting the paper stack, throw the lever on the fast-action clamp to tighten—then cut.
    • Precision Back Gauge : The cast aluminum back gauge and side guide with measurement scale allows precise paper alignment.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4305

    $1929.00

  14. MBM Triumph 4705 18.75" Tabletop Manual Paper Cutter - CU0462L (MB-4705)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Spindle Clamp With Hand Wheel : The hand wheel is used to apply even clamping pressure along the entire cutting width.
    • Measurement Scale : The precision measurement scale on the front table allows precise back gauge positioning.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4705

    $3639.00

  15. MBM Triumph 4850 18.625" Electric Paper Cutter with Digital Display (MBM-4850)

    • SCS (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine
    • Electric blade and clamp drive
    • Solingen steel blade
    • Solid steel bade carrier and adjustable blade guides
    • Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
    Part #: MBM-4850

    $9899.00

  16. MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490)

    • Transparent Safety Guard. A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0490

    $12099.00

  17. MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0491

    $14449.00

  18. MBM Triumph 5560 21-5/8" Programmable Hydraulic Paper Cutter with VRCut Software - V (CU0493)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0493

    $18299.00

  19. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $26199.00

  20. Tamerica Guillo-Max 17" Guillotine Stack Paper Cutter (360 Sheets) (TGUILLOMAX)

    • Capable of smoothly cutting up to 360 sheets of printer paper at a time.
    • The all metal construction on this unit ensures durability, dependability and consistency.
    • Manually Adjustable Back Gauge.
    • Manual Cutting and Clamp Operation.
    • 1 Year Warranty.
    Part #: TGUILLOMAX

    $358.70

  21. Dahle Vantage Personal 12 Inch Guillotine Paper Cutter (12E)

    • Cuts up to 15 sheets of paper at a time
    • Spring action metal blade will not fall down
    • Automatic paper clamp holds work securely
    • Sturdy metal base with non-skid runner feet
    • Pre-printed grid for easy sizing of paper
    Part #: 12E

    $41.18

  22. Dahle Vantage Personal 15 Inch Guillotine Paper Cutter (15E)

    • Cuts up to 15 sheets of paper at a time
    • Spring action metal blade will not fall down
    • Automatic paper clamp holds work securely
    • Sturdy metal base with non-skid runner feet
    • Pre-printed grid for easy sizing of paper
    Part #: 15E

    $51.76

  23. Dahle Vantage Personal 18 Inch Guillotine Paper Cutter (18E)

    • Cuts up to 15 sheets of paper at a time
    • Spring action metal blade will not fall down
    • Automatic paper clamp holds work securely
    • Sturdy metal base with non-skid runner feet
    • Pre-printed grid for easy sizing of paper
    Part #: 18E

    $69.41

  24. Dahle 43" Premium Large Format Guillotine Paper Cutter (585)

    • Cuts up to 30 sheets of paper at a time
    • Industrial size guillotine equipped to handle large format work
    • Ground self-sharpening blade made of Solingen Steel is lockable to prevent unauthorized use
    • Acrylic safety shield separates hand from blade
    • Manual foot clamp holds work securely in place and prevents shifting
    Part #: 585

    $2050.25

  25. Dahle Model Professional 13-3/8" Guillotine Paper Cutter (560)

    • Cuts up to 25 sheets of paper at a time
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    • Sturdy metal base with preprinted guides
    Part #: 560

    $170.25

  26. Dahle Model 533 Professional 12 Inch Guillotine Paper Cutter (DAH533)

    • Replacement Blades: 1620022450
    • Cuts up to 15 sheets of paper at a time
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    Part #: DAH533

    $116.50

  27. Dahle Model 534 Professional 18 Inch Guillotine Paper Cutter (DAH534)

    • Replacement Blades: 1620022626
    • Cuts up to 15 sheets of paper at a time (212-218)
    • Ground self-sharpening blade made of Solingen Steel
    • Sturdy blade will not fly up or drop down
    • Manual paper clamp protects fingers and holds work securely
    Part #: DAH534

    $116.19

  28. Formax Cut-True 29A 20.5" Electric Programmable Guillotine Cutter (CutTrue 29A)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Electronically-Controlled: Paper clamp pressure and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut, allowing for precise adjustments prior to cutting
    Part #: CutTrue 29A

    $10619.75

  29. Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
    Part #: Cut-True 29H

    $16695.00

  30. Formax Cut-True 31H 28" Hydraulic Guillotine Cutter (Cut-True31H)

    • Standard Features:
    • Heavy Duty Construction: Designed for true two-shift operation.
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier.
    • Low-Friction Air-Assist Ball Deck: Makes it easy for operators to move and position heavy paper stacks.
    • High-Speed Hardened Steel Blade: Designed for accurate cuts and long life.
    Part #: Cut-True31H

    $20989.75

Items 1-15 of 22

Display Type List Grid

Related Categories