Paper Cutter with Clamp

Page
  1. Challenge Spartan 150A 15.75" Automatic Electric Paper Cutter w/ Power Clamp (CH-SPARTAN150A)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Automatic Power Clamping: Automatic power clamping improves productivity and makes cutting simple. All you need to do is lower the safety shield and press the two cutting buttons..
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150A

    $5245.00

  2. Challenge Spartan 185SA 18.5" Semi Automatic Electric Paper Cutter (CH-SPARTAN185SA)

    • Cutting: Powered by a 1-1/2 HP gear drive motor
    • Manual Clamping: The hand wheel design provides a strong clamping force resulting in high quality cuts.
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185SA

    $8995.00

  3. Challenge Spartan 185A 18.5' Automatic Electric Paper Cutter (CH-SPARTAN185A)

    • Electric Power Clamping: Generates over 3000 lbs (1,360 kg) of clamping force
    • Independent Clamping Function: Allows for a "clamp only" operation
    • Manual Backgauge Control: Hand Wheel Control
    • LED Digital Backgauge Position Indicator: With +/-0.01" (+/-0.1mm) backgauge accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used with other brands.
    • Laser Red LED Cut Line Light: produces a bright easy to see cut line.
    Part #: CH-SPARTAN185A

    $10395.00

  4. Standard Electric 17" Desktop Paper Cutter (PC-P430)

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $4770.00

  5. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450)

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $6390.00

  6. Standard 17.7" Programmable Electric Paper Cutter (APC-450)

    • Control Panel:
    • Job recall function. Frequent jobs, for example A3 cut to A4 can be recalled with the push of a button. Three “Quick Call” buttons are available to program frequent jobs.
    • Programming function. Repeat jobs can be conveniently saved to memory. The capacity of job memory is 30 courses and 99 steps (total 300 points).
    • Operator Safety:
    • Standard Equipped Area Sensors. If the area sensors detect any objects, the cutting motion will stop immediately. These sensors meet the high level of safety in Category 4 according to ISO13849-1.
    Part #: APC-450

    $11900.00

  7. Challenge Spartan 150SA 15.75" Semi Automatic Electric Paper Cutter (CH-SPARTAN150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: CH-SPARTAN150SA

    $4745.00

  8. Challenge Titan 200BC 20" Electric Paper Cutter with Tilt Shield (CH-TITAN200BC)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has clear plexiglass shield that you have to flip down in order for the cutter to work
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Plexiglas Safety Shield.
    Part #: CH-TITAN200BC

    $11595.00

  9. MBM Triumph 4315 16.875" Semi-Automatic Tabletop Paper Cutter (CU0451)

    • Electric blade drive
    • Soligen steel blade
    • Solid steel blade carrier and adjustable blade guides
    • Patented, lever-activated, fast-action clamp
    • Precision side guide
    Part #: CU0451

    $4599.00

  10. Challenge Champion 305 Manual Backgauge 30.5" Electric Paper Cutter (CH-305X)

    • 30-1/2" Cutting Width, 4" Clamp Opening
    • Hydraulic Clamping & Cutting
    • Adjustable Clamp Pressure
    • Manual Foot Pedal Clamping
    • Backgauge Position Indicator
    Part #: CH-305X

    $28995.00

  11. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  12. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  13. Challenge Titan 200BC 20" Electric Paper Cutter with Light Beam (TITAN200BCLB)

    • 20" Cutting Width, 3-1/4" Clamp Opening.
    • Hydraulic Clamping & Cutting.
    • Has laser light beams for safety that detect if anything is in the way
    • Adjustable Clamp Pressure.
    • Cutting Area Protection - Light Beam Curtain
    Part #: TITAN200BCLB

    $13595.00

  14. Challenge Titan 230 TC 23" Hydraulic Programmable Paper Cutter w/ Color Touch Screen Control (CH-TITAN230TC)

    • 10.5" Color Touch Screen
    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    Part #: CH-TITAN230TC

    $19995.00

  15. Challenge Champion 305 TC 30.5" Programmable Paper Cutter (CH-305TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening.
    • Hydraulic clamping and cutting.
    Part #: CH-305TC

    $33295.00

  16. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  17. Standard 24" Programmable Hydraulic Paper Cutter (APC-610)

    • Hydraulic clamping and cutting mechanism ensures powerful and accurate cutting quality.
    • The servo-motor driven backgauge assures accurate positioning and repeatability for consistent quality production.
    • The color touchscreen is intuitive and icon-based for user-friendly operation. Operation, setting and information screens are used for efficient and accurate operation.
    • The Simple Program Setting screen displays sheet rotating direction and cutting order graphically.
    • The APC-610 is activated only when the two cut buttons are simultaneously pressed for operator safety.
    Part #: APC-610

    $28100.00

  18. Standard 25" Electric Paper Cutter (PC-640)

    • Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.
    • Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
    • Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety. Simple and safe operation suitable for office use.
    • Easy Operation - Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons.
    • Double Safety Circuit -The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
    Part #: PC-640

    $9900.00

  19. MBM Triumph 4305 16.875" Tabletop Manual Paper Cutter - CU0450L (MB-4305)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Patented Fast-Action Clamp : After inserting the paper stack, throw the lever on the fast-action clamp to tighten—then cut.
    • Precision Back Gauge : The cast aluminum back gauge and side guide with measurement scale allows precise paper alignment.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4305

    $1929.00

  20. MBM Triumph 4705 18.75" Tabletop Manual Paper Cutter - CU0462L (MB-4705)

    • Transparent Safety Guard : A cut can only be executed if the hinged safety guard is in the closed position and the blade safety catch is released.
    • Hand Crank : The calibrated hand crank and front table measurement scale ensure precise back gauge positioning
    • Spindle Clamp With Hand Wheel : The hand wheel is used to apply even clamping pressure along the entire cutting width.
    • Measurement Scale : The precision measurement scale on the front table allows precise back gauge positioning.
    • Safe Blade Changes : Blade changes can be made without removing the machine covers. The handy blade changing device covers the cutting edge of blade.
    Part #: MB-4705

    $3639.00

  21. MBM Triumph 4850 18.625" Electric Paper Cutter with Digital Display (MBM-4850)

    • SCS (Safety Cutting System) package: hinged, transparent electronically controlled front safety guard; transparent safety cover on rear table; main switch and safety lock with key; electronically controlled, true two-hand operation; 24 volt controls (low voltage); patented IDEAL safety drive; automatic blade return from every position; automatic clamp return from every position; disc brake for instant blade stop; blade and cutting stick can be changed without removing covers; blade changing device covers cutting edge of blade; blade depth adjustment from outside of machine
    • Electric blade and clamp drive
    • Solingen steel blade
    • Solid steel bade carrier and adjustable blade guides
    • Automatic clamp is guided on both sides to apply even pressure along entire cutting width (can be lowered or raised independently from blade)
    Part #: MBM-4850

    $9899.00

  22. Challenge Spartan 150M 15.75" Manual Heavy-Duty Paper Cutter (CH-SPARTAN150M)

    • Cutting: Manual - Hand Lever Operation
    • Clamping: Manual - Hand-Crank. The hand-crank design for clamping creates a much higher clamping force than the lever design which results in a better quality cut.
    • LED Digital Backgauge Position Indicator with +/-0.01" (+/-0.1mm) Backgauge Accuracy - provides for easier operator interface, higher productivity, and easier repeatable accuracy than a hard to read indicator on a scale as is used in other brands.
    • Laser Red LED Cut Line Light - produces a very sharp, easy to see cut line without the replacement problems of incandescent bulbs.
    • Front Safety Shield interlocked with the cutting lever - provides protection for the operator during operation.
    Part #: CH-SPARTAN150M

    $2745.00

  23. MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490)

    • Transparent Safety Guard. A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0490

    $12099.00

  24. MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0491

    $14449.00

  25. Dahle 36" Large Format Guillotine Paper Cutter - Model 136 - Open Box (MYR-3285)

    • Cuts up to 40 sheets of paper at a time
    • Patented beveled blade made of Solingen Steel is lockable to prevent unauthorized use
    • Self-adjusting clamp holds material securely
    • Metal fan guard seperates hand from blade
    • Lockable T-square guide assures accuracy
    Part #: MYR-3285

    $714.50

  26. MBM Triumph 5560 21-5/8" Programmable Hydraulic Paper Cutter with VRCut Software - V (CU0493)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0493

    $18299.00

  27. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497

    $21999.00

  28. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $26199.00

  29. Challenge Refurbished Spartan 150SA Semi Automatic Electric Paper Cutter (MY150SA)

    • Power Cutting: Electric power - 1/2HP Gear Drive Motor
    • Manual Clamping: Hand crank wheel system provides over 200% more clamping force than the lever clamping system. RESULT - a better cut.
    • Safety Guards: Safety covers over the front table (the cutting area) and rear table.
    • Safety Dual Cut Buttons: Requires the simultaneous use of both hands to operate.
    • Construction: Heavy Duty Steel, Cast Iron, and Cast Aluminum Construction gives it "Challenge durability". Hardened steel components and bronze bearings on most wear surfaces increase the life of the machine.
    Part #: MY150SA

    $2995.00

  30. Premier Heavy Duty 36" Wood Paper Trimmer With Clamp - WC36 - Open Box (MYR-16-527)

    • Heavy-duty 3/4" thick wood base
    • Self-sharpening stainless steel blades cut up to 20 sheets at once
    • Cutting length: 36"
    • Accurately cuts paper, mat board, cardboard, film, tissue and textiles
    • Permanent 1/2" grid and dual English and metric rulers
    Part #: MYR-16-527

    $206.02

Items 1-15 of 22

Display Type List Grid

Related Categories