Programmable Paper Cutters

Page
  1. Challenge Champion 370 TC 37" Programmable Paper Cutter (CH-370TC)

    • Up to 24 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • Electronically-adjustable and programmable clamp pressure.
    • Low-pressure pre-clamping protects operator from injury (less than 66 PSI).
    Part #: CH-370TC

    $44250.00

  2. Challenge Titan 265 TC 26.5" Hydraulic Programmable Paper Cutter (TITAN265TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Solid 1-inch thick metal table offers the strong work surface required in production environments.
    • Trim business cards with the false clamp plate installed – reducing unwanted waste.
    • Low-pressure pre-clamping reduces operator injury (less than 66 PSI).
    Part #: TITAN265TC

    $26995.00

  3. Challenge Titan 230 23" Hydraulic Programmable Paper Cutter (TITAN230PC)

    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    • Optional electronic clamp pressure adjustment.
    Part #: TITAN230PC

    $18295.00

  4. Challenge Titan 230 TC 23" Hydraulic Programmable Paper Cutter w/ Color Touch Screen Control (CH-TITAN230TC)

    • 10.5" Color Touch Screen
    • Fully hydraulic cutting and clamping.
    • Solid cast iron and steel construction ensure years of trouble-free operation.
    • Solid 1-inch thick tool grade aluminum table offers the strong work surface required in production environments.
    • Bright red LED line light is easy to see and needs no future replacement.
    Part #: CH-TITAN230TC

    $19995.00

  5. Challenge Champion 305 TC 30.5" Programmable Paper Cutter (CH-305TC)

    • Up to 26 cuts per minute.
    • Virtually maintenance-free design.
    • Fully-adjustable knife bar gibs (front and rear).
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening.
    • Hydraulic clamping and cutting.
    Part #: CH-305TC

    $33295.00

  6. MBM Triumph 5255 20.375" Electric Programmable Paper Cutter (MBM-CU0490)

    • Transparent Safety Guard. A cut can only be executed if the hinged, electronically controlled safety guard is in the closed position.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0490

    $12099.00

  7. MBM Triumph 6655 25.5" Electric Programmable Paper Cutter (MBM-CU0491)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: MBM-CU0491

    $14449.00

  8. Formax Cut-True 29A 20.5" Electric Programmable Guillotine Cutter (CutTrue 29A)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Electronically-Controlled: Paper clamp pressure and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut, allowing for precise adjustments prior to cutting
    Part #: CutTrue 29A

    $12895.00

  9. Formax 20.5" Hydraulic Programmable Guillotine Cutter (Cut-True 29H)

    • Hardened Steel Blade: Designed for accurate cuts and long life
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use
    • Touchscreen Control Panel: Easily set, adjust and program jobs
    • LED Cutting Line: Bright red LED line indicates exactly where the blade will cut
    Part #: Cut-True 29H

    $16695.00

  10. Tamerica 19.29" Programmable Paper Stack Cutter (TPI-4900E)

    • Programmability: 100 programs x 96 settings.
    • Micro Glide Back Gauge.
    • 5" Touch Screen.
    • Back Gauge Control Knob.
    • Optical Cut Line.
    Part #: TPI-4900E

    $6399.00

  11. Standard 17.7" Programmable Electric Paper Cutter (APC-450)

    • Control Panel:
    • Job recall function. Frequent jobs, for example A3 cut to A4 can be recalled with the push of a button. Three “Quick Call” buttons are available to program frequent jobs.
    • Programming function. Repeat jobs can be conveniently saved to memory. The capacity of job memory is 30 courses and 99 steps (total 300 points).
    • Operator Safety:
    • Standard Equipped Area Sensors. If the area sensors detect any objects, the cutting motion will stop immediately. These sensors meet the high level of safety in Category 4 according to ISO13849-1.
    Part #: APC-450

    $11900.00

  12. Standard 24" Programmable Hydraulic Paper Cutter (APC-610)

    • Hydraulic clamping and cutting mechanism ensures powerful and accurate cutting quality.
    • The servo-motor driven backgauge assures accurate positioning and repeatability for consistent quality production.
    • The color touchscreen is intuitive and icon-based for user-friendly operation. Operation, setting and information screens are used for efficient and accurate operation.
    • The Simple Program Setting screen displays sheet rotating direction and cutting order graphically.
    • The APC-610 is activated only when the two cut buttons are simultaneously pressed for operator safety.
    Part #: APC-610

    $28100.00

  13. Graphic Whizard FL 490Z 19.3" Programmable Electric Paper Cutter (FL-490Z)

    • 7” color touchscreen.
    • Laser light guard for safety.
    • 88 job memory.
    • Quick blade depth adjustment.
    • Red beam laser cut line for accurate job set up.
    Part #: FL-490Z

    $9335.00

  14. MBM Triumph 5560 21-5/8" Programmable Hydraulic Paper Cutter with VRCut Software - V (CU0493)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0493

    $18299.00

  15. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497

    $21999.00

  16. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $26199.00

  17. YUL Programmable 19" Electric Paper Cutter with Wifi/3G Option (EPC019)

    • Performance:
    • Fully programmable up to 100 programs x 100 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC019

    $9650.00

  18. YUL Programmable 26" Electric Paper Cutter with Mobile Cabinet and Wifi/3G Option (EPC026)

    • Performance:
    • Fully programmable up to 100 programs x 100 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC026

    $20000.00

  19. YUL Programmable 17" Electric Paper Cutter with Wifi/3G Option (EPC017)

    • Performance:
    • Fully programmable up to 1000 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC017

    $7750.00

  20. YUL Programmable 22" Electric Paper Cutter with Wifi/3G Option (EPC022)

    • Performance:
    • Fully programmable up to 1000 steps
    • English, French and Spanish user interface
    • Micro Glide Backgauge eliminates bottom sheet from slipping under
    • Backgauge extremities spaced for small formats
    Part #: EPC022

    $15000.00

  21. Challenge Titan 200 20" Hydraulic Programmable Cutter with Shield (CH-TITAN200)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200

    $14995.00

  22. Challenge Titan 200 20" Hydraulic Programmable Cutter with Light Beams (CH-TITAN200L)

    • Maximum Cutting Width: 20" / 50.8cm
    • Minimum Cut: without false clamp plate: 1/2" / 13mm
    • Minimum Cut: with false clamp plate: 1-7/8" / 48mm
    • Maximum Cut Depth: 20" / 50.8cm
    • Clamp Opening: without false clamp plate: 3-1/4" / 8cm
    Part #: CH-TITAN200L

    $16695.00

  23. Challenge Titan 200 TC 20" Hydraulic Programmable Cutter with Light Beams and Colored Touch Screen (CH-TITAN200TCL)

    • 20" Cutting Width
    • 10.5" Color Touch Screen
    • New Control System and Software
    • Ethernet and USB ports
    • Compatibility with .csv files
    Part #: CH-TITAN200TCL

    $17995.00

  24. Formax FD 574 Cut-Sheet Cutter (FD-574)

    • User-Friendly Control Panel: Provides operator with helpful word prompts for effective and efficient operation
    • 6 Pre-programmed Paper Cutting Sizes, including: 8.5" into 1, 2, or 3 even cuts 11" into 1, 2, 3 or 4 even cuts 14" into 1, 2, 3, 4 or 5 even cuts 11" x 17" into 1, 2, 3, 4, 5, 6, or 7 even cuts 12" x 18" into 2-up 8.5" x 11" (with optional slitter)
    • 100 Programmable Jobs: Available for custom cutting operations
    • Cutting Method: Guillotine Cutter
    • Top-loading feed system
    Part #: FD-574

    $8250.00

  25. James Burn Onglematic O5P Guillotine Index Tab Cutter (ONGLEMATICO5P)

    • Electric positioning and manual cutting action
    • Programmable table-top cutter is equipped with a double round corner die
    • Cuts 2-12 equal size tabs per 11" long sheet.
    • Cuts 2-9 equal size tabs per 8-1/2" long sheet.
    • Cuts up to 15 sheets of 20 lb. (80gsm) paper at once.
    Part #: ONGLEMATICO5P

    $3195.00

Items 1-15 of 22

Display Type List Grid

Related Categories