Proseal Laminating Film

Page
  1. White ProSeal 18.5" x 25" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC18WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 220 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 18.5" width
    Part #: MYBC18WHT

    $112.99

  2. White ProSeal 36" x 48" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC36WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 220 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36" width
    Part #: MYBC36WHT

    $336.99

  3. White ProSeal 25" x 37" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM25WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBM25WHT

    $211.99

  4. White ProSeal 36" x 48" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM36WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBM36WHT

    $378.39

  5. Black ProSeal 25" x 37" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC25BLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25" width
    Part #: MYBC25BLK

    $208.79

  6. Black ProSeal 36" x 48" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC36BLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36" width
    Part #: MYBC36BLK

    $385.49

  7. White ProSeal 41" x 61" Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBC41WHT)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 41" width
    Part #: MYBC41WHT

    $467.29

  8. Black ProSeal Clear Gloss Mounting/Laminating Pouch Boards - 10pk (MYBCBLK)

    • 3/16" thick foam board
    • 5 mil high gloss film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 240 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBCBLK

    $208.79

  9. White ProSeal 11.5" x 17.5" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM1117WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 11.5 inch width
    Part #: MYBM1117WHT

    $40.69

  10. Black ProSeal 36" x 48" Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBM36BLK)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBM36BLK

    $425.19

  11. White ProSeal 11.5" x 17.5" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM11WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 11.5 inch width
    Part #: MYBSM11WHT

    $44.79

  12. White ProSeal 18.5" x 25" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM18WHT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 18.5 inch width
    Part #: MYBSM18WHT

    $275.79

  13. White ProSeal 25" x 37" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM25WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBSM25WHT

    $202.59

  14. Black ProSeal 36" x 48" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM36BLK)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBSM36BLK

    $459.29

  15. Black ProSeal Crystal Matte Mounting/Laminating Pouch Boards - 10pk (MYBMBPS-CMAT)

    • 3/16" thick foam board
    • 5 mil matte crystal film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBMBPS-CMAT

    $234.59

  16. Black ProSeal 25" x 37" Smooth Matte Mounting/Laminating Pouch Boads - 10pk (MYBSM25BLK)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBSM25BLK

    $199.09

  17. Black ProSeal Smooth Matte Mounting/Laminating Pouch Boads - 10pk (MYBSBPS-SMAT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBSBPS-SMAT

    $199.09

  18. 5mil Matte Clear 25" x 37" Oversize Small Poster Laminating Pouches - 25pk (MYLP25X37MC5)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • 5 mil film
    • Clear or Gloss one side and Matte on the other side
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLP25X37MC5

    $370.39

  19. 5mil Clear 36" x 48" Laminating Pouches - 25pk (MYLP36X48C5)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • 5 mil film
    • Clear both sides
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLP36X48C5

    $491.99

  20. 5mil Clear 37" x 49" Laminating Pouches - 25pk (MYLP37X49C5)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • 5 mil film
    • Clear both sides
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLP37X49C5

    $580.29

  21. 5mil Matte Clear 18" x 24" Laminating Pouches - 25pk (MYLP18X24MC5)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • 5 mil film
    • Clear or Gloss one side and Matte on the other side
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLP18X24MC5

    $185.29

  22. Matte Clear Map Size Laminating Pouches (MYLKLPMAPMC)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • Available Thickness: 5 mil film
    • Clear or Gloss one side and Matte on the other side
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLKLPMAPMC

    $185.29

  23. Matte Clear 25" x 37" Oversize Small Poster Laminating Pouches (MYLKLP25X37MC)

    • Low temperature heat adhesive for use in ProSeal and Superstick pouch laminators
    • Available Thickness: 5 mil film
    • Clear or Gloss one side and Matte on the other side
    • Sled is 3/16 non-stick foam board
    • Low Temperature adhesive
    Part #: MYLKLP25X37MC

    $370.39

  24. White 25" x 37" Thermal Activated Foam Core Mounting Boards - 10pk (MB25)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MB25

    $129.79

  25. White 36" x 48" Thermal Activated Foam Core Mounting Boards - 10pk (MB36)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MB36

    $250.59

  26. White 18.5" x 25" Thermal Activated Foam Core Mounting Boards - 10pk (MYBMB18WHT)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MYBMB18WHT

    $95.89

  27. White 41" x 61" Thermal Activated Foam Core Mounting Boards - 10pk (MYBMB41WHT)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MYBMB41WHT

    $340.39

  28. Black 25" x 37" Thermal Activated Foam Core Mounting Boards - 10pk (MYBMB25BLK)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MYBMB25BLK

    $152.59

  29. Black 3/16" Thermal Activated Foam Core Mounting Boards (MYBMB316BLK)

    • Consists of 3/16" thick white foam board
    • Mounting adds stability and rigidity while laminating protects your print from spills and helps your colors 'pop'
    • Use with Seal Finishline, USI BigMouth, Fellowes or ProSeal laminators
    • Low temperature adhesives are safe for all inkjet and other prints
    • Use with easels, sold seperately
    Part #: MYBMB316BLK

    $152.59

Items 1-15 of 22

Display Type List Grid

Related Categories