Punches and Dies

Page
  1. GBC CombBind Magnapunch and 660id Die Set (7707020)

    • Type: GBC Magnapunch / Ibico 660ID Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC CombBind with 3 Position Adjustable Back Gauge
    • Pitch: 9/16" Pitch
    • Hole Shape: Rectangle
    Part #: 7707020

    $656.74

  2. GBC WireBind 2:1 Square Hole Magnapunch and 660id Die Set (7707130)

    • Type: GBC Magnapunch / Ibico 660ID Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC WireBind
    • Pitch: 2:1 Pitch
    • Hole Shape: Square
    Part #: 7707130

    $689.59

  3. GBC Colorcoil 4:1 .2475 Pitch Magnapunch and 660id Die Set (7707040)

    • Type: GBC Magnapunch / Ibico 660ID Die Set
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC ColorCoil
    • Pitch: 4:1 Pitch (0.2475)
    • Hole Shape: Round
    Part #: 7707040

    $656.74

  4. Akiles Manual Modular Interchangeable Die Binding Punch (FLEXIPUNCH-M)

    • High Volume Punching Capacity : The heavy duty manual punching mechanism can handle up to 25 sheets of 20lb paper per lift.
    • Interchangeable Die Sets : You can easily change from one punching pattern to another. No tools are required and it only takes seconds to switch patterns.
    • Fully Disengageable Punching Pins : The FlexiPunch-M allows punching of all paper sizes without partially punched holes at either end.
    • Four Available Punching Patterns: Punching patterns are available for comb punching (rectangular holes), 2:1 pitch twin loop wire binding (square holes), 3:1 pitch twin loop wire binding (square holes) and 4:1 Pitch (0.2475") Round Hole Coil Binding.
    • Adjustable Depth of Punch Margin Control : Available for all four punching dies, this feature allows you to adjust the distance of the punched holes from the edge of your document.
    Part #: FLEXIPUNCH-M

    $622.49

  5. GBC WireBind 3:1 Square Pitch Magnapunch 2.0 Die Set (7705630)

    • Type: GBC Magnapunch 2.0
    • Manufacturer: GBC (General Binding Corporation)
    • Punching Pattern: GBC WireBind
    • Pitch: 3:1
    • Hole Shape: Square
    Part #: 7705630

    $669.71

  6. Tamerica Versabind Modular Comb Die Set - NH-D18C (NH-D18-C)

    • Punch Capacity : 30 sheets
    • Punch Length: 14" (35.6 cm)
    • Disengageable Punch Pins: Yes 24 fully disengageable pins
    • Part Number: NH-D18-C
    • Create clean comb binding with Versabind
    Part #: NH-D18-C

    $230.29

  7. Tamerica Versabind Modular 2:1 Wire Die Set (WO-11A)

    • Punch Capacity : 30 sheets
    • Punch Length: 14" (35.6 cm)
    • Disengageable Punch Pins: Yes 24 fully disengageable pins
    • Part Number: WO-11A
    • Create clean comb binding with Versabind
    Part #: WO-11A

    $230.29

  8. Tamerica Versabind Modular 3:1 Wire Die Set - WO11 (WO-11)

    • Punch Capacity : 30 sheets
    • Punch Length: 14" (35.6 cm)
    • Disengageable Punch Pins: Yes ( 24 fully disengageable pins)
    • Part Number: WO-11A
    • Create clean comb binding with Versabind
    Part #: WO-11

    $230.29

  9. Tamerica Versabind Modular 4:1 Coil Die Set - SP11 (SP-11)

    • Punch Capacity : 30 sheets
    • Punch Length: 14" (35.6 cm)
    • Disengageable Punch Pins: Yes, 24 fully disengageable pins
    • Part Number: SP-11.
    • Create clean comb binding with Versabind
    Part #: SP-11

    $230.29

  10. Akiles FlexiPunch-M 2:1 Pitch Wire Binding Die Set (FLEXIPUNCH21DM)

    • Type : Akiles FlexiPunch-M Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 2:1 Pitch (Two Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH21DM

    $271.95

  11. Akiles FlexiPunch-M 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DM)

    • Type: Akiles FlexiPunch-M Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DM

    $271.95

  12. Akiles FlexiPunch-M 4:1 Pitch Coil Binding Die Set (FLEXIPUNCH41DM)

    • Type: Akiles FlexiPunch-M Die Set
    • Punching Pattern: Spiral Coil Binding
    • Pitch: 4:1 Pitch (0.2475") (Four Holes Per Inch)
    • Hole Shape: Round
    • Length: Twelve Inches
    Part #: FLEXIPUNCH41DM

    $271.95

  13. Akiles FlexiPunch-M Binding Die Sets (FLEXIPUNCHBDS-M)

    • Type : Akiles FlexiPunch-M Die Set
    • Punching Pattern: Varies
    • Pitch: Varies
    • Hole Shape: Varies
    • Length: Twelve Inches
    Part #: FLEXIPUNCHBDS-M

    $271.95

  14. Akiles FlexiPunch-E Plastic Comb Binding Die Set (FLEXIPUNCHPBDE)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Plastic Comb Binding
    • Pitch: 9/16" On Center
    • Hole Shape: Rectangle
    • Length: Twelve Inches
    Part #: FLEXIPUNCHPBDE

    $271.95

  15. Akiles FlexiPunch-E 2:1 Pitch Wire Binding Die Set (FLEXIPUNCH21DE)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 2:1 Pitch (Two Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH21DE

    $271.95

  16. Akiles FlexiPunch-E 3:1 Pitch Wire Binding Die Set (FLEXIPUNCH31DE)

    • Type: Akiles FlexiPunch-E Die Set
    • Punching Pattern: Double Loop Wire Binding
    • Pitch: 3:1 Pitch (Three Holes Per Inch)
    • Hole Shape: Square
    • Length: Twelve Inches
    Part #: FLEXIPUNCH31DE

    $271.95

  17. Akiles FlexiPunch-E 4:1 Pitch Coil Binding Die Set (FLEXIPUNCH41DE)

    • Type: Akiles FlexiPunch-E Die Set
    • Punching Pattern: Spiral Coil Binding
    • Pitch: 4:1 Pitch (0.2475") (Four Holes Per Inch)
    • Hole Shape: Round
    • Length: Twelve Inches
    Part #: FLEXIPUNCH41DE

    $271.95

  18. Akiles FlexiPunch-E Binding Die Sets (FLEXIPUNCHBDS-E)

    • Type : Akiles FlexiPunch-E Die Set
    • Punching Pattern: Varies
    • Pitch: Varies
    • Hole Shape: Varies
    • Length: Twelve Inches
    Part #: FLEXIPUNCHBDS-E

    $271.95

  19. Tamerica 213PB Plastic Comb 3-Hole Punch Binding Machine (TP-213PB)

    • Punch and Bind plastic and wire rings.
    • 4-position punching depth adjustment.
    • 21 Disengageable dies.
    • Hollow Ground dies.
    • All Metal construction.
    Part #: TP-213PB

    $308.29

  20. Tamerica 4:1 Coil Punch & Bind Machine with Crimping Pliers (TPC-4600)

    • Punches 44 hole pattern on 8.5" x 11" Letter sized stock and 46 hole pattern on A4 sized stock.
    • Open-ended punch throat.
    • 4-position punching depth adjustment.
    • Heavy-duty, all-metal construction.
    • Hollow ground dies.
    Part #: TPC-4600

    $242.00

  21. Tamerica Refurbished - 210-PB Plastic Comb Punch & Bind (R4TAM210PB)

    • Punches 5,000 sheets/ hr up to 12” or 21 holes and binds 250 books/ hr up to 2” thick
    • Heavy duty all metal construction.
    • Compatible with Combs from 3/16" - 2"
    • 4 Position depth of punch margin adjustment
    • 21 Fully disengageable dies for custom sheet sizes.
    Part #: R4TAM210PB

    $163.00

  22. Akiles RubiCoil Manual Coil Binding Machine (AKRUBICOIL)

    • Punches up to 10 sheets of 20lbs bond paper
    • Harden Steel dies: For a clean and precise punch every time, even when perforating delicate or hard to punch materials, such as PVC, PP, Polyester, etc.
    • "U" Shape Handle: Maximizes punching-strength, for an effortless perforation.
    • Strong: Metal chassis and high quality components guarantee durability and reliability.
    • Side Margin Guide: To evenly center the document.
    Part #: AKRUBICOIL

    $290.09

  23. Akiles CoilMac M Manual Coil Binding Machine (AKCOILMAC)

    • Die Disengagement Pins: For a clean punch with multiple paper sizes.
    • Punching Margin Control: Provides the correct punch-margin-depth for each coil size and maximizes the document's tear resistance.
    • Side Margin Control: Provides an evenly centered punch for all document sizes.
    • Coil Selector
    • Open Punching Throat and Continuous Punching Guide
    Part #: AKCOILMAC

    $385.69

  24. Akiles 3:1 OffiWire Manual Wire Binding Machine (OffiWire31)

    • Punches up to 10 sheets of 20lbs. bond paper.
    • Harden Steel Dies Provide a clean and precise punch every time, even when punching delicate or hard to punch materials, such as PVC, Poly Covers, Polyester, etc.
    • "U" Shape Handle: Maximizes punching-strength, for an effortless perforation.
    • Strong: Metal chassis and high quality components guarantee durability and reliability.
    • Bilateral Closer: Systematically and independently adjusts at either end, providing a precise and even wire closure.
    Part #: OffiWire31

    $264.09

  25. Akiles CoilMac ER+ Plus Oval Hole Coil Binding Machine with Inserter (Coilmac-ER+)

    • Extended Single Punching Length (13") : With open ends & continuous punch guide to easily punch documents of any length (up to 26").
    • High Volume Punch Capacity : Suggested up to 20-sheet* for 20 lbs paper, or 2.6mm (28-sheet equivalent)** for hardboard, in 13" length (53 holes).
    • Super Strength Punch Mechanism with exclusive "Precision Guiding SystemTM" Blade Set : Cast-hardened & heat-treated steel dies provide superior strength & hardness. Exclusive "precision guiding system" guarantees a sharp & clean perforation everytime.
    • Top Electric Roller Coil Inserter (Foot Pedal Operated) : This easy to use and durable roller makes coil inserting surprisingly fast and easy. It is strategically placed on the left side of the machine so your coil will clear the punch handle while you are inserting.
    • Side Margin Control : Provides an evenly centered punch for all document sizes.
    Part #: Coilmac-ER+

    $524.09

  26. Akiles Manual Plastic Comb Binding Machine (ALPHABIND-CM)

    • Punching Length : 12" with open throat for longer documents.
    • High-Volume Punch Capacity : With its unique punching mechanism, you can punch up to 25 sheets of 20 lbs paper per lift.
    • Binding Capacity : Up to 2".
    • Die Disengagement Pins : Allows punching of all paper sizes without any partially punched holes.
    • Depth Margin Control : Adjustable depth margins (4 steps) offers the best margin distance for each book size.
    Part #: ALPHABIND-CM

    $355.95

  27. Akiles 2:1 OffiWire Manual Wire Binding Machine (offiWire21)

    • Punches up to 10 sheets of 20lbs. bond paper.
    • Harden Steel Dies Provide a clean and precise punch every time, even when punching delicate or hard to punch materials, such as PVC, Poly Covers, Polyester, etc.
    • "U" Shape Handle: Maximizes punching-strength, for an effortless perforation.
    • Strong: Metal chassis and high quality components guarantee durability and reliability.
    • Bilateral Closer: Systematically and independently adjusts at either end, providing a precise and even wire closure.
    Part #: offiWire21

    $264.09

  28. Akiles RubiCoil Manual Coil Binding Starter Kit with Supplies (AKRUBICOIL-K)

    • Punches up to 10 sheets of 20lbs bond paper
    • Harden Steel dies: For a clean and precise punch every time, even when perforating delicate or hard to punch materials, such as PVC, PP, Polyester, etc.
    • "U" Shape Handle: Maximizes punching-strength, for an effortless perforation.
    • Strong: Metal chassis and high quality components guarantee durability and reliability.
    • Side Margin Guide: To evenly center the document.
    Part #: AKRUBICOIL-K

    $360.16

  29. Akiles OfficWire Manual 3:1 Wire Binding Starter Kit with Supplies and Covers (OffiWire31-K)

    • Punches up to 10 sheets of 20lbs. bond paper.
    • Harden Steel Dies Provide a clean and precise punch every time, even when punching delicate or hard to punch materials, such as PVC, Poly Covers, Polyester, etc.
    • "U" Shape Handle: Maximizes punching-strength, for an effortless perforation.
    • Strong: Metal chassis and high quality components guarantee durability and reliability.
    • Bilateral Closer: Systematically and independently adjusts at either end, providing a precise and even wire closure.
    Part #: OffiWire31-K

    $343.16

  30. Akiles Refurbished CoilMac ECI 4:1 Coil Binding Machine w/ Electric Inserter (R4AKELCOIL)

    • Die Disengagement Pins: For a clean punch with multiple paper sizes.
    • Punching Margin Control: Provides the correct punch-margin-depth for each coil size and maximizes the document's tear resistance.
    • Open Punching Throat and Continuous Punching Guide: For an easy alignment and punching of longer documents.
    • Side Margin Control: Provides an evenly centered punch for all document sizes.
    • Electric Roller Inserter (Foot Pedal Operated): Allows the free use of both hands and grants the operator complete rotating control of the roller. Drastically reduces time and costs by making the inserting surprisingly fast and easy.
    Part #: R4AKELCOIL

    $546.00

Items 1-15 of 22

Display Type List Grid

Related Categories