Sheet Counters

Page
  1. US Paper Counters Intelecount Sheet Counter and Batch Tabber (CW-IC)

    • Applications:
    • Fast, accurate counting
    • Fast, accurate tabbing
    • Quantity verification
    • Security verification
    Part #: CW-IC

    $18000.00

  2. US Paper Counters Shooter-IID High Speed In-Line Press Tabber and Counter (TS-IID)

    • Applications:
    • In-line batching at high speeds.
    • Maximize press time and profit.
    • Stop shortages and overages.
    • Improve customer satisfaction .
    Part #: TS-IID

    $4499.00

  3. US Paper Counters Paper Counter and Batch Tabber (Max-Bantam)

    • Applications:
    • Exact count deliveries.
    • Provide competitive quotes.
    • Eliminate re-runs & miscounts.
    • Improve quantity control.
    Part #: Max-Bantam

    $12830.04

  4. US Paper Counters Count-Wise I High Volume Paper Counter and Batch Tabber (CW1)

    • Applications:
    • Exact count deliveries.
    • Maximize efficiency.
    • Control quantity at every stage.
    • Fast, accurate tabbing.
    Part #: CW1

    $14999.00

  5. US Paper Counters Count-Wise M High Volume Paper Counter and Batch Tabber (CWM)

    • Applications:
    • Exact count deliveries.
    • Maximize efficiency.
    • Control quantity at every stage.
    • Fast, accurate tabbing.
    Part #: CWM

    $16749.00

  6. Duplo Cut Sheet Burster (V-417)

    • Wide range of paper stock up to 110 lb. index
    • Form sizes up to 11" x 17"
    • Up to 140 sheets per minute
    • Speed control in 5 steps
    • New LCD counter Adjustable side guides for different form width
    Part #: V-417

    $5400.00

  7. Formax FD 4170 Cut Sheet Burster (FD-4170)

    • 5-level speed adjustment: 42, 64, 89, 114, 140 sheets per minute
    • 4-digit LCD Counter
    • Feed tray capacity of up to 400 sheets
    • Three-tire, top-loading feed system
    • Accommodates a wide range of paper stock, up to 110# index (175gsm)
    Part #: FD-4170

    $7550.00

  8. Quik-Pik-R Sheet Picker Finger Counter Ring (MYFCR)

    • Convenient, efficient, and simple tool that helps you count and separate our stacks of paper into designated stack thicknesses.
    • Just set the depth by rotating the screw, slide the device onto your ring finger (or any finger you prefer), and run it over your stack.
    • Separator base will easily glide between sheets without damaging them, allowing you to grab the pre-determined stack easily.
    • Ppaper counting ring can greatly increase speed and productivity, while eliminating headaches and hassle with hand-counting stacks.
    • Accurate counter and sheet separating tool ensures your binding punch is not overloaded or working below it's potential by ensuring the proper number of sheets are inserted for each punch.
    Part #: MYFCR

    $29.95

  9. Formax Tabletop Document Folder (FD382)

    • Pre-programmed for 6 popular folds: Letter, Zig-Zag, Single, Gate, Fold Out and Double Parallel folds in 11", 14" & 17" (Int'l Sizes A3, B4, A4, B5, A5 & B6)
    • Telescoping Outfeed Stacker: Holds up to 500 folded documents and keeps them in a neat and sequential order
    • Optional Dedicated Multi-Sheet Feeder: Designed with an independent skew adjuster, side guides and paper sensor, operators can fold up to 3 stapled or unstapled sheets of paper at the same time
    • AutoBatchTM: Processes a pre-determined number of sheets into sets with a delay between sets
    • Manual Batch Counter: Processes a pre-determined number of forms
    Part #: FD382

    $4495.00

  10. Akiles BookletMac Semi-Automatic Booklet Maker (AKBOOKLETMAC)

    • Compact: The Akiles BookletMac fits comfortably in your office, school, church or print shop.
    • Easy to Operate: No warm-up time. Simply insert the sheets and the Akiles BookletMac will staple and fold them into a book in seconds
    • Multi-Functional: With the Akiles BookletMac you can choose from Fold & Staple, fold only or staple only. Side and corner stapling also available
    • Versatile: The Akiles BookletMac makes booklets from all common paper sizes including letter, A4, A3, and 11" x 17" sheets.
    • Precise: The Akiles BookletMac has a built in LCD-Counter that gives you precise control of your job progress. Clear window allows you to monitor the operation easily.
    Part #: AKBOOKLETMAC

    $1869.00

  11. Standard Desktop Air Feed Automatic Set Up Paper Folder (PF-P330)

    • Simple Operation: The operator can quickly select from four standard preset sheet sizes and six popular fold patterns all with push button simplicity. Operational information and settings are clearly displayed on the control panel's LCD screen. The intuitive design of the control panel makes any operator comfortable and quickly productive.
    • Revolutionary Paper Feed System: At the heart of the PF-P330 is a patented rotary vacuum-pulse feed system that delivers extraordinary paper feed reliability. Importantly, it simplifies operation by virtually eliminating the need to make paper feed adjustments with most stocks. This advancement utilizes a space saving and surprisingly quiet vacuum/blower pump. The pump's small 8" x 8" footprint creates flexibility by allowing for desktop positioning alongside the folder or on a cabinet shelf under the PF-P330. The low sound level of the PF-P330's pump is notable in comparison to the significantly higher sound levels traditionally associated with suction feed folders. In fact, the PF-P330 pump is as quiet as a mid-volume office copier.
    • Preset Fold Formats: Letter Fold, Half Fold, Double Parallel Fold, Engineering Fold, Z-Fold, Gate Fold
    • Programmable Memory Function: There are ten programmable memory settings for custom folds. The preset counter can be set to stop at a specific batch quantity with the 10-digit keypad.
    • Simple Maintenance: The PF-P330 is designed for easy operator maintenance. Removal of the fold rollers requires no tools, making cleaning or replacement a simple task.
    Part #: PF-P330

    $6799.00

  12. Formax Fully Automatic Tabletop Document Folder (FD38X)

    • Pre-programmed for 6 popular folds: Letter, Zig-Zag, Single, Gate, Fold Out and Double Parallel folds in 11", 14" & 17" (Int'l Sizes A3, B4, A4, B5, A5 & B6)
    • Telescoping Outfeed Stacker: Holds up to 500 folded documents and keeps them in a neat and sequential order
    • Dedicated Multi-Sheet Feeder: Designed with an independent skew adjuster, side guides and paper sensor, operators can fold up to 3 stapled or unstapled sheets of paper at the same time
    • AutoBatchTM: Processes a pre-determined number of sheets into sets with a delay between sets
    • Manual Batch Counter: Processes a pre-determined number of forms
    Part #: FD38X

    $5095.00

  13. Count NumberPro Touch 18" Numbering Machine (CNUMPRO18)

    • Easily program to number, perforate or score, individually or at the same time.
    • Offers a reliable top-load friction paper feed.
    • Includes a sheet counter (for both batch and total sheet count).
    • Includes reliable electric, Gothic wheel reverse numbering heads - with 7 digits, 4 drop zeros and multiple repeats.
    • Apply numbers virtually anywhere on a sheet - from lead edge, place numbers within 1 mm of previous number.
    Part #: CNUMPRO18

    $8238.00

  14. Count Auto Pro Touch 18" Numbering Machine (CAUTOPRO1)

    • Easily program to number, perforate or score, individually or at the same time.
    • Offers a reliable bottom friction feed paper feed.
    • Includes a sheet counter (for both batch and total sheet count).
    • Includes reliable pneumatic, Gothic wheel reverse numbering heads - with 7 digits, 4 drop zeros and multiple repeats.
    • Apply numbers virtually anywhere on a sheet - from lead edge, place numbers within 1 mm of previous number.
    Part #: CAUTOPRO1

    $10653.00

  15. Standard Electric 17" Desktop Paper Cutter (PC-P430)

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $4770.00

  16. Formax AutoSeal FD 2096 Mid-Volume Production Pressure Sealer (FD-2096)

    • Variable Speed: Large jobs are processed quickly at speeds of up to 30,000 forms per hour.
    • Top-Loading Bottom Air Feed: The air feed deck accurately feeds forms, while allowing for continuous top feeding, with no need to stop and reload.
    • Resettable Counter: 6-digit LED counter provides maximum audit control.
    • Noise Reduction: Covers and fold plates are insulated to reduce operating noise.
    • Rugged Construction: Designed for mid-volume production environments.
    Part #: FD-2096

    $39495.00

  17. Formax FD 324 Tabletop Document Folder (FD-324)

    • Operating Features:
    • Fixed Speed: Jobs are processed quickly at speeds of up to 8,600 pieces per hour
    • LCD Panel: Keeps an accurate tally of pages processed, with a resettable counter
    • Output Conveyor: Adjustable stacker wheels provide neat, sequential stacking of folded documents
    • Drop-In Feed System: A three-tire drop-in feed system produces dependable feeding of forms with no fanning required
    Part #: FD-324

    $2295.00

  18. Swingline ClassicCut CL560m 30" Square Maple Table Trimmer (SWI-1174)

    • Guillotine cutting of up to 15 sheets of 20 lb. paper at once
    • Table legs detach to use trimmer on a desk or counter
    • Protective guard rail safety feature plus blade latch hook to lock blade
    • 30" square
    • Limited 10-year warranty
    Part #: SWI-1174

    $690.73

  19. Swingline ClassicCut CL570m 36" x 30" Maple Table Trimmer (SWI-1184)

    • Guillotine cutting of up to 15 sheets of 20 lb. paper at once
    • Table legs detach to use trimmer on a desk or counter
    • Protective guard rail safety feature plus blade latch hook to lock blade
    • 36" x 30"
    • Limited 10-year warranty
    Part #: SWI-1184

    $827.43

  20. Swingline Black Commercial Desk Stapler (SWI-44401)

    • Commercial stapler is ideal for businesses that need to staple day in and day out
    • Specialized inner rail reduces risk of jams
    • Staples up to 20 sheets at a time
    • Metal construction stapler is durable and designed for quality stapling from a desk or counter top
    • Positive locking latch makes sure staples are in proper position for seamless use
    Part #: SWI-44401

    $9.27

  21. Lassco Wizer W175 Ultra II Padding Press (W175-ULTRA)

    • Adjustable with up to 10,000 sheet capacity
    • Pads up to 18" wide, 22" high
    • 360 degree swivel base allows high production without lifting the load
    • Heavy-duty cast iron clamps
    • Requires minimal counter space
    Part #: W175-ULTRA

    $338.24

  22. MBM FC 10 Automatic 10-Bin Friction Collator (CO0750)

    • Collates variety of paper stocks and weights at speeds up to 3,600 sets per hour
    • 275 sheet bin capacity
    • Touch-button control panel with LED 4 digit counter simplifies set-up and operation
    • Programming modes include preset batch, insertion, and an alternate bin mode for continuous production
    • Adjustable stacking table for straight or criss-cross stacking
    Part #: CO0750

    $6199.00

  23. GBC 620os-1 Automated Feeder (1880012)

    • Capable to handle paper stock ranging from 80lb. text to 12 pt. cover stock
    • Adjustable vaccum, air blast and separator fingers to prevent double feeding and miss feeding
    • Adjustable magnetic side guides for easy set-up and perfect feeding
    • Easy Laminator settings for length and overlaps
    • Sheet feed counter tracks input
    Part #: 1880012

    $11554.16

  24. Paitec ES5500 Low-Volume Desktop Pressure Sealer and Folder (PES5500)

    • Deep 150 Sheet Feed Table. The ES5500 feed table holds up to 150 sheets of pressure seal forms at a time.
    • Double Feed Detection. Advanced sensors detect double feeds and automatically stop the ES5500 to prevent jams.
    • LCD Touch Pad Control with Counter. The ES5500 is controlled by an easy to use touch pad with buttons for double feed detection, item and batch counter, and other controls.
    • Compact & Dynamic Design. Convenient compact design features a small foot print so that you can place the ES5500 pressure sealer on your office desk.
    • Deep 150 Sheet Feed Table
    Part #: PES5500

    $3752.09

  25. Baum AutoBaum B12M Desktop Paper Folder (Manual Setup) (BAUMB12M)

    • Manual setup of fold plates, manual setup of delivery wheels.
    • Multiple set feeder optional.
    • 15,500 folds per hour letter fold A4 or 11" long paper.
    • Pre-marked for six standard fold settings in common paper sizes.
    • Batch counter to process pre-set number of sheets and stops.
    Part #: BAUMB12M

    $3157.00

  26. Ultra Pad Heavy-Duty Padding Press (ULTRA-PAD)

    • Heavy-Duty Padding Press is featured with durable quick release cast iron clamps.
    • The 360 degree rotation allows for high production while using a minimum of counter space.
    • This padding press holds 10,000 8.5” wide sheets.
    • Constructed of white maple for added strength and durabilty.
    • Overall Dimensions: 30"H x 22"W x 15"D
    Part #: ULTRA-PAD

    $324.00

  27. Mini Pad II Compact Table-Top Padding Press (MINI-PAD)

    • Compact table top version of the Ultra Pad padding press.
    • It is featured with easy to use pressure clamps and 360 degree swivel for easy access without lifting padding stack.
    • It can hold 3,000 8.5" wide sheets.
    • Ideal in those locations with limited counter space.
    • Its small foot print requires a minimum of operating space for use and easy storage when padding job is complete.
    Part #: MINI-PAD

    $184.00

  28. Table-Top Padding Press (PP-1)

    • Pads up to 4,000 8.5" x 11" sheets of paper or 8,000 5.5" x 8.5" sheets.
    • Ideal where padding jobs tend to be small and counter space is a factor.
    • Can be purchased with padding supply starter kit that includes a quart of white pad adhesive, a sample of fan apart glue, a pad brush and 10 sheets of chip board.
    • Shipping Weight: 40 lb.
    • Pads up to 4,000 8.5" x 11" sheets of paper
    Part #: PP-1

    $125.00

  29. Duplo Automatic Tabletop Paper Folder (DF-870)

    • Automatic setting of fold plates and stacker roller.
    • Six preprogrammed popular folds.
    • Cross folding for right-angle folds.
    • Fold up to 241 sheet per minute (LTR Size).
    • Ascending and descending counters.
    Part #: DF-870

    $3600.00

  30. MBM 307A Automatic Tabletop Paper Folding Machine - Open Box (MYR-MBM-307A)

    • Three roller friction feed system
    • Pre-programmed with 6 standard folds
    • Stores 18 custom folds in memory
    • Control panel includes LED four digit counter with batch and total functions
    • Test button folds 2 sheets for inspection
    Part #: MYR-MBM-307A

    $3117.60

Items 1-15 of 22

Display Type List Grid

Related Categories