Smooth Mount

Page
  1. Smooth Mount 27" Pouch Board Roll Laminator Starter Kit (PBML-2725-KIT)

    • Starter Kit Includes:
    • 27” Smooth Mount Laminator
    • Laminator Cart
    • Sircle 40” Foam Board Cutter
    • 25" X 37" White Gloss 3/16" MountCor Pouch Boards (10pk)
    Part #: PBML-2725-KIT

    $2205.88

  2. Smooth Mount 40" Pouch Board Roll Laminator Starter Kit (PBML-4025-KIT)

    • Starter Kit Includes:
    • 40” Smooth Mount Laminator
    • Laminator Cart
    • Sircle 40” Foam Board Cutter
    • 25" X 37" White Gloss 3/16" MountCor Pouch Boards (10pk)
    Part #: PBML-4025-KIT

    $2823.53

  3. Smooth Mount 52" Pouch Board Roll Laminator Starter Kit (PBML5230-KIT)

    • Starter Kit Includes:
    • 52” Smooth Mount Laminator
    • Sircle 60” Foam Board Cutter
    • 25" X 37" White Gloss 3/16" MountCor Pouch Boards (10pk)
    • 25" x 37" White 3/16" MountCor Low Temp Heat Activated Mounting Boards (10pk)
    Part #: PBML5230-KIT

    $4188.24

  4. Smooth Mount 27" Pouch Board Roll Laminator (PBML-2725)

    • Rear Table Extension Legs improve results and productivity
    • Boards exit unattended and safely cool flat (Patent applied for)
    • Attaches securely in seconds without tools
    • Stores under laminator to save space when not in use
    • Variable Temperature and Speed
    Part #: PBML-2725

    $1899.99

  5. Smooth Mount 40" Pouch Board Roll Laminator (PBML-4025)

    • Rear Table Extension Legs improve results and productivity
    • Boards exit unattended and safely cool flat (Patent applied for)
    • Attaches securely in seconds without tools
    • Stores under laminator to save space when not in use
    • Variable Temperature and Speed
    Part #: PBML-4025

    $2079.99

  6. Smooth Mount 52" Pouch Board Roll Laminator (PBML-5230)

    • Rear Table Extension Legs improve results and productivity
    • Boards exit unattended and safely cool flat (Patent applied for)
    • Attaches securely in seconds without tools
    • Stores under laminator to save space when not in use
    • Variable Temperature and Speed
    Part #: PBML-5230

    $3595.00

  7. Black ProSeal 25" x 37" Smooth Matte Mounting/Laminating Pouch Boads - 10pk (MYBSM25BLK)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBSM25BLK

    $180.96

  8. Black ProSeal 41" x 61" Smooth Matte Mounting/Laminating Pouch Boads - 10pk (MYBSM41BLK)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBSM41BLK

    $517.26

  9. Black ProSeal Smooth Matte Mounting/Laminating Pouch Boads - 10pk (MYBSBPS-SMAT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBSBPS-SMAT

    $180.96

  10. SEAL 38" x 15' 3mil Print Mount Removable Plus Pressure-Sensitive Mounting Adhesive (SPMRP62092)

    • Constructed on a 3mil white opaque carrier having a permanent top adhesive.
    • Bonds aggressively to the print, while the bottom adhesive securely bonds to the surface, yet is removable when required.
    • Bond to a wide range of hard, smooth surfaces.
    • Can be removed up to 6 months without leaving a residue.
    • Ideal for floor graphics, window signage and counter top graphics.
    Part #: SPMRP62092

    $28.57

  11. SEAL 38" x 200' 3mil Print Mount Removable Plus Pressure-Sensitive Mounting Adhesive (SPMRP62087)

    • Constructed on a 3mil white opaque carrier having a permanent top adhesive.
    • Bonds aggressively to the print, while the bottom adhesive securely bonds to the surface, yet is removable when required.
    • Bond to a wide range of hard, smooth surfaces.
    • Can be removed up to 6 months without leaving a residue.
    • Ideal for floor graphics, window signage and counter top graphics.
    Part #: SPMRP62087

    $487.07

  12. SEAL 51" x 200' 3mil Print Mount Removable Plus Pressure-Sensitive Mounting Adhesive (SPMRP62091)

    • Constructed on a 3mil white opaque carrier having a permanent top adhesive.
    • Bonds aggressively to the print, while the bottom adhesive securely bonds to the surface, yet is removable when required.
    • Bond to a wide range of hard, smooth surfaces.
    • Can be removed up to 6 months without leaving a residue.
    • Ideal for floor graphics, window signage and counter top graphics.
    Part #: SPMRP62091

    $590.67

  13. SEAL 3mil Print Mount Removable Plus Pressure-Sensitive Mounting Adhesive (SPMA-3PMRPPSMA)

    • Constructed on a 3mil white opaque carrier having a permanent top adhesive.
    • Bonds aggressively to the print, while the bottom adhesive securely bonds to the surface, yet is removable when required.
    • Bond to a wide range of hard, smooth surfaces.
    • Can be removed up to 6 months without leaving a residue.
    • Ideal for floor graphics, window signage and counter top graphics.
    Part #: SPMA-3PMRPPSMA

    $28.57

  14. H. Wilson 37" - 60" LCD TV Mount Mobile Stand (WPSMS51)

    • Flat panel TV stand and mount ideal for classrooms, libraries, tradeshow booths and corporate boardrooms.
    • Durable all steel frame with black powder coat paint finish and Integrated cable management.
    • Measures 31.5"W x 28"D x 51"H (from the floor to the middle of the mounting unit).
    • Includes WFST Universal Flat Panel Mount, which has 200 lb maximum weight capacity, holds a 37"- 60" flat panel or LCD TV, and features smooth, continuous touch tilt that allows up to 15 (+ -) degrees of adjustment.
    • A/V equipment shelf adjustable from 25" to 40" in 2.5" increments with 35 lb weight capacity.
    Part #: WPSMS51

    $320.88

  15. White ProSeal 9" x 11.5" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM911WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 9 inch width
    Part #: MYBSM911WHT

    $31.40

  16. White ProSeal 11.5" x 17.5" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM11WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 11.5 inch width
    Part #: MYBSM11WHT

    $40.67

  17. White ProSeal 25" x 37" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM25WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 25 inch width
    Part #: MYBSM25WHT

    $184.15

  18. White ProSeal 36" x 48" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM36WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBSM36WHT

    $380.57

  19. White ProSeal 41" x 61" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM41WHT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 41 inch width
    Part #: MYBSM41WHT

    $521.89

  20. Black ProSeal 36" x 48" Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSM36BLK)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Edge seal on the 36 inch width
    Part #: MYBSM36BLK

    $417.45

  21. White ProSeal Smooth Matte Mounting/Laminating Pouch Boards - 10pk (MYBSWPS-SMAT)

    • 3/16" thick foam board
    • 5 mil matte smooth film attached
    • Low temperature adhesives safe for all inkjet and other prints
    • Run at 250 degrees and 2 feet per minute in roll laminators
    • Size: Choose Above
    Part #: MYBSWPS-SMAT

    $31.40

  22. Quartet Evoque 39" x 22" Magnetic Glass Dry-Erase Board with Invisible Mount (QRT-G3922BA)

    • Features a high-end look with professional appeal.
    • Magnetic glass surface offers a smooth writing surface and doubles as a bulletin board.
    • Glass board has a black aluminum frame.
    • Invisible mounting gives the board the appearance of floating on the wall.
    • Limited 25-year warranty
    Part #: QRT-G3922BA

    $97.83

  23. Quartet Evoque 50" x 28" Magnetic Glass Dry-Erase Board with Invisible Mount (QRT-G5028BA)

    • Features a high-end look with professional appeal.
    • Magnetic glass surface offers a smooth writing surface and doubles as a bulletin board.
    • Glass board has a black aluminum frame.
    • Invisible mounting gives the board the appearance of floating on the wall.
    • Limited 25-year warranty
    Part #: QRT-G5028BA

    $212.11

  24. Quartet Evoque 74" x 42" Magnetic Glass Dry-Erase Board with Invisible Mount (QRT-G7442BA)

    • Features a high-end look with professional appeal.
    • Magnetic glass surface offers a smooth writing surface and doubles as a bulletin board.
    • Glass board has a black aluminum frame.
    • Invisible mounting gives the board the appearance of floating on the wall.
    • Limited 25-year warranty
    Part #: QRT-G7442BA

    $410.13

  25. Quartet Evoque 85" x 48" Magnetic Glass Dry-Erase Board with Invisible Mount (QRT-G8548BA)

    • Features a high-end look with professional appeal.
    • Magnetic glass surface offers a smooth writing surface and doubles as a bulletin board.
    • Glass board has a black aluminum frame.
    • Invisible mounting gives the board the appearance of floating on the wall.
    • Limited 25-year warranty
    Part #: QRT-G8548BA

    $523.28

  26. Quartet Evoque Magnetic Glass Dry-Erase Boards with Invisible Mount (QRT-GBA)

    • Features a high-end look with professional appeal.
    • Magnetic glass surface offers a smooth writing surface and doubles as a bulletin board.
    • Glass board has a black aluminum frame.
    • Invisible mounting gives the board the appearance of floating on the wall.
    • Limited 25-year warranty
    Part #: QRT-GBA

    $97.83

  27. Polar E 25" Electric Cold Mount Roll Laminator (04POLARE25)

    • Roll Print Media Guide which holds prints away from exposed adhesives until ready to be processed.
    • Can run board thicknesses of up to 1/2" thick.
    • High quality silicon rollers with smooth turning sealed bearings.
    • Single knob for roll height adjustment assures rollers are always parallel.
    • Automatic mechanism to take off the liner from laminating films while processing.
    Part #: 04POLARE25

    $1249.00

  28. Polar E 55" Electric Cold Mount Roll Laminator (04POLARE55)

    • Roll Print Media Guide which holds prints away from exposed adhesives until ready to be processed.
    • Can run board thicknesses of up to 1/2" thick.
    • High quality silicon rollers with smooth turning sealed bearings.
    • Single knob for roll height adjustment assures rollers are always parallel.
    • Automatic mechanism to take off the liner from laminating films while processing.
    Part #: 04POLARE55

    $2370.25

  29. Royal Sovereign Rollover Classic 55" x 118" Flatbed Applicator for Mounting and Laminating (10314)

    • Key Features:
    • Ideal for rigid panel application and laminating digital prints.
    • Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
    • Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
    • Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
    Part #: 10314

    $17384.29

  30. Royal Sovereign Rollover Classic 67" x 118" Flatbed Applicator for Mounting and Laminating (10317)

    • Key Features:
    • Ideal for rigid panel application and laminating digital prints.
    • Substrates up to 3.5 inches can be handled for perfectly flat applications without bubbles or creases.
    • Applying digital prints and other self-adhesive applications on rigid panels such as composite board, acrylic, aluminum etc., is just one of the areas where Rollover Classic reveals its excellent properties in results and operations.
    • Being able to comfortably operate the laminator with one hand while having free access to roller, media and tabletop, results in smooth and effective handling.
    Part #: 10317

    $19764.29

Items 1-15 of 22

Display Type List Grid

Related Categories