Standard Paper Cutter

Page
  1. Standard Electric 17" Desktop Paper Cutter (PC-P430)

    • Dual Push Buttons: The PC-P430 is activated only when the safety cover is closed and both cutting buttons are simultaneously pressed. The two buttons are sufficiently spaced to ensure operator safety.
    • Safety Covers: The cutter is equipped with front and rear safety covers. The front cover includes a safety switch to prevent unsafe operation.
    • Press Section: An automatic clamping press moves simultaneously with the cutting knife. A special cutout is provided to prevent book spines from crushing.
    • Cutting Line: Illuminated cut line conveniently identifies the cut position for easy sheet positioning
    • Cut Stick Lift Lever: The cut stick is easily replaced by using the integrated lift lever.
    Part #: PC-P430

    $4770.00

  2. Standard Semi Automatic 17.5" Electric Paper Cutter (PC-450)

    • Safety Sequence Circuitry & Safety Mechanism: The knife is actuated by two-hand throw in switches. So, if either one of the two switches is released in the middle of cutting, the machine instantaneously stops. Further, the knife automatically moves up to its home position even if the switches are released after the knife has reached its lower dead point.
    • Cutter & Illuminated Cut-Line: The cutting knife made of special steel ensures consistently high standard cutting quality for a prolonged period of time. Further, the built in illuminated cut-line indicator helps you find easily the cut-line without identifying the cut-line each time.
    • Precise Backgauge Travel: The precision-built backgauge lead-screw enables you to make a trim cut as fine as 0.5mm (0.019"). The backgauge is operated by the handcrank at the front-table and can be locked if necessary.
    • Simple Operation: There are no complicated switch controls except the two-hand knife switches. You need only three steps to complete the cutting job: setting up the cut size, clamping the stock, and depressing the two-hand knife switches. That's all.
    • Cutting Witdh: 17.5"
    Part #: PC-450

    $6390.00

  3. Standard 17.7" Programmable Electric Paper Cutter (APC-450)

    • Control Panel:
    • Job recall function. Frequent jobs, for example A3 cut to A4 can be recalled with the push of a button. Three “Quick Call” buttons are available to program frequent jobs.
    • Programming function. Repeat jobs can be conveniently saved to memory. The capacity of job memory is 30 courses and 99 steps (total 300 points).
    • Operator Safety:
    • Standard Equipped Area Sensors. If the area sensors detect any objects, the cutting motion will stop immediately. These sensors meet the high level of safety in Category 4 according to ISO13849-1.
    Part #: APC-450

    $11900.00

  4. Standard 25" Electric Paper Cutter (PC-640)

    • Accurate Cutting - The backgauge enables you to adjust the cutting length accurately within 0.5mm / 0.019" by turning the positioning handle. The backgauge can be locked when you repeat the same cutting position.
    • Cut Line - The LED cutting line shows the actual cutting position to allow easy and accurate positioning and operation.
    • Safety - The PC-640 employs updated safety standards. Two button operation, safety cover, and emergency stop features for operator safety. Simple and safe operation suitable for office use.
    • Easy Operation - Clamp the stock by turning the pressure handle by hand, and press the two cutting buttons.
    • Double Safety Circuit -The system is further equipped with a hard-wired secondary safety interrupt for operator safety.
    Part #: PC-640

    $9900.00

  5. Standard 24" Programmable Hydraulic Paper Cutter (APC-610)

    • Hydraulic clamping and cutting mechanism ensures powerful and accurate cutting quality.
    • The servo-motor driven backgauge assures accurate positioning and repeatability for consistent quality production.
    • The color touchscreen is intuitive and icon-based for user-friendly operation. Operation, setting and information screens are used for efficient and accurate operation.
    • The Simple Program Setting screen displays sheet rotating direction and cutting order graphically.
    • The APC-610 is activated only when the two cut buttons are simultaneously pressed for operator safety.
    Part #: APC-610

    $28100.00

  6. Formax Cut-True 31A 28" Electric Guillotine Cutter (Cut-True31A)

    • Standard Features:
    • Heavy Duty Construction: Designed for true two-shift operation.
    • High-Speed Hardened Steel Blade: Designed for accurate cuts and long life.
    • Electronically-Controlled: Paper clamp pressure and blade carrier.
    • False Clamp: Minimizes marking of sensitive paper stock, easily stores within the machine when not in use.
    Part #: Cut-True31A

    $19346.00

  7. Formax Cut-True 31H 28" Hydraulic Guillotine Cutter (Cut-True31H)

    • Standard Features:
    • Heavy Duty Construction: Designed for true two-shift operation.
    • Hydraulically-Controlled: Adjustable hydraulics control paper clamp and blade carrier.
    • Low-Friction Air-Assist Ball Deck: Makes it easy for operators to move and position heavy paper stacks.
    • High-Speed Hardened Steel Blade: Designed for accurate cuts and long life.
    Part #: Cut-True31H

    $22676.00

  8. HSM 450.2cc Level P-4 Cross Cut Professional Paper Shredder (1503)

    • With its practical filling hopper, the HSM 450.2 is the answer if crumpled paper is frequently the material to be shredded.
    • Keypad for constant operation and reverse.
    • Auto stop when container is full or door is open.
    • Large filling hopper and integrated, rotating loading aid (security level 3 only).
    • Hardened steel cutters can handle occasional standard paper clips or staples.
    Part #: 1503

    $8884.00

  9. Standard Replacement Blade For MBM-Ideal-Triumph 4205,4215,4225 EP,4250, 4300, 4305,4315,4350 (JH42213S)

    • Material: Standard Inlay
    • Compatible Models: MBM, Ideal, Triumph Cutter Models 4205,4215,4225 EP,4250,4300 4305,4315,4350
    • Holes: 5 Holes
    • Hole Size: M6
    • Length: 19.187"
    Part #: JH42213S

    $237.39

  10. Standard Replacement Blade (Rounded Corners) For MBM-Ideal-Triumph 430EP, 4225 (JH-37776)

    • Material: Standard Inlay
    • Compatible Models: MBM, Ideal, Triumph Cutter Models 430EP, 4225
    • Holes: 5 Holes
    • Hole Size: M6
    • Length: 19.187"
    Part #: JH-37776

    $227.89

  11. Keencut 45mm Standard Circular Textile Blades (10pk) (69133)

    • Work with: Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Length: 45mm
    • Quantity: 10 Per Pack
    • Work with Evolution-E2, Sabre Series 2, Javelin Series 2 and Javelin Integra
    • Used for cutting textiles, thin paper, fabric and other flimsy materials
    Part #: 69133

    $27.00

  12. Lassco Wizer Cornerounder Corner Cutter (CR-50B)

    • The Model CR-50B heavy duty bench model corner rounder is designed with smooth rigid cutting action for hard-to-do jobs.
    • It accepts a full range of interchangeable cutting units (1/16" to 1-1/2" radii) with a maximum cutting depth of 1/2".
    • One standard cutting unit (1/8", 1/4", 3/8", or 1/2") is included.
    • For cutting paper and plastic products.
    • Shear action cutting for hard-to-do jobs.
    Part #: CR-50B

    $284.00

  13. Lassco Wizer Cornerounder Corner Cutter (CR-20)

    • The Model CR-20 desk top corner rounder handles up to 1/2" of stock per cut.
    • It comes equipped with one standard cutting unit of your choice. (1/8", 1/4", 3/8", or 1/2").
    • For cutting paper and plastic products.
    • Shear action cutting.
    • Its 5" x 10-1/2" size makes it easy for use all around any office or factory.
    Part #: CR-20

    $163.66

  14. Lassco Wizer Cornerounder Manual Corner Cutter (CR-50)

    • The Model CR-50 Corner Rounder floor model is for large operations.
    • Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
    • Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
    • Corner Rounder Weight 50 lbs.
    • Designed to cut paper and plastic
    Part #: CR-50

    $898.99

  15. Lassco Wizer Cornerounder Electric Corner Cutter (CR-50P)

    • The Model CR-50P Corner Rounder floor model is for large operations.
    • Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
    • Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
    • Corner Rounder Weight 50 lbs.
    • Designed to cut paper and plastic
    Part #: CR-50P

    $1574.00

  16. Lassco Wizer Cornerounder Pneumatic Corner Cutter (CR-50XP)

    • The Model CR-50XP Corner Rounder floor model is for large operations.
    • Featuring hands-free operation and hold-down clamping that secures the stock with each stroke.
    • Comes with choice of a standard cutting unit (1/8", 1/4", 3/8", or 1/2") and can easily be adaptable for using large radii up to 1-1/2".
    • Corner Rounder Weight 82 lbs.
    • Designed to cut paper and plastic
    Part #: CR-50XP

    $1754.00

  17. Martin Yale 18" Manual Ream Cutter (620RC)

    • Manual paper clamp allows for additional stack pressure
    • Precise hand crank back gauge
    • Standard English and metric rulers for accuracy
    • Battery operated cutting light
    • Legs adjust up to 11/2" to facilitate leveling
    Part #: 620RC

    $2491.12

  18. Standard Red Cutting Stick for Polar 55 Cutter - 12pk (JH-CS3116)

    • Compatible Cutters: Polar 55 Cutter
    • Length: 22.047"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43200
    • Part Number: JH-CS3116
    Part #: JH-CS3116

    $22.39

  19. Standard Red Cutting Stick for Polar 58 Cutter - 12pk (JH-CS3121)

    • Compatible Cutters: Polar 58 Cutter
    • Length: 23.228"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43225
    • Part Number: JH-CS3121
    Part #: JH-CS3121

    $23.59

  20. Standard Red Cutting Stick for Polar 66 Cutter - 12pk (JH-CS3130)

    • Compatible Cutters: Polar 66 Cutter
    • Length: 26.929"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43230
    • Part Number: JH-CS3130
    Part #: JH-CS3130

    $27.39

  21. Standard Red Cutting Stick for Polar 71 Cutter - 12pk (JH-CS3137)

    • Compatible Cutters: Polar 71 Cutter
    • Length: 28.346"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43250
    • Part Number: JH-CS3137
    Part #: JH-CS3137

    $28.79

  22. Standard Red Cutting Stick for Polar 72 Cutter - 12pk (JH-CS3144)

    • Compatible Cutters: Polar 72 Cutter
    • Length: 28.74"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43250
    • Part Number: JH-CS3144
    Part #: JH-CS3144

    $29.19

  23. Standard Red Cutting Stick for Polar 76 Cutter - 12pk (JH-CS3154)

    • Compatible Cutters: Polar 76 Cutter
    • Length: 30.315"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43700
    • Part Number: JH-CS3154
    Part #: JH-CS3154

    $30.79

  24. Standard Red Cutting Stick for Polar 78 Cutter - 12pk (JH-CS3162)

    • Compatible Cutters: Polar 78 Cutter
    • Length: 31.102"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43900; 43950
    • Part Number: JH-CS3162
    Part #: JH-CS3162

    $31.69

  25. Standard Red Cutting Stick for Polar 80 Cutter - 12pk (JH-CS3172)

    • Compatible Cutters: Polar 80 Cutter
    • Length: 31.89"
    • Size: .174 x .394"
    • Replacement Blade Part #: 43900
    • Part Number: JH-CS3172
    Part #: JH-CS3172

    $32.39

  26. Standard Red Cutting Stick for Polar 82 Cutter - 12pk (JH-CS3178)

    • Compatible Cutters: Polar 82 Cutter
    • Length: 32.677"
    • Size: .174 x .394"
    • Replacement Blade Part #: 44100; 44200;
    • Part Number: JH-CS3178
    Part #: JH-CS3178

    $33.29

  27. Standard Red Cutting Stick for Polar 86 Cutter - 12pk (JH-CS3189)

    • Compatible Cutters: Polar 86 Cutter
    • Length: 34.646"
    • Size: .174 x .394"
    • Replacement Blade Part #: 44400; 44450
    • Part Number: JH-CS3189
    Part #: JH-CS3189

    $35.29

  28. Standard Red Cutting Stick for Polar 90 Cutter - 12pk (JH-CS3196)

    • Compatible Cutters: Polar 90 Cutter
    • Length: 35.827"
    • Size: .174 x .394"
    • Replacement Blade Part #: 44400; 44450; 44451
    • Part Number: JH-CS3196
    Part #: JH-CS3196

    $36.49

  29. Standard Red Cutting Stick for Polar 92 Cutter - 12pk (JH-CS3207)

    • Compatible Cutters: Polar 92 Cutter
    • Length: 36.614"
    • Size: .174 x .394"
    • Replacement Blade Part #: 44450; 44451;
    • Part Number: JH-CS3207
    Part #: JH-CS3207

    $37.29

  30. Standard Red Cutting Stick for Polar 107 Cutter - 12pk (JH-CS3218)

    • Compatible Cutters: Polar 107 Cutter
    • Length: 42.52"
    • Size: .174 x .394"
    • Replacement Blade Part #: 44459; 44500
    • Part Number: JH-CS3218
    Part #: JH-CS3218

    $43.29

Items 1-15 of 22

Display Type List Grid

Related Categories