System Software

Page
  1. Formax AutoSeal FD 2006IL Print-Fold-Seal In-Line System (FD2006IL)

    • Color Touchscreen Control Panel: Graphics-based and designed for easy, walk-up use.
    • Print, Fold and Seal: One-step process eliminates excess document handling.
    • Document Security: Enclosed paper path from printer to pressure sealer ensures security. Ideal for PIN notices or other confidential applications.
    • Form Capabilities: Processes forms up to 14" in length.
    • Printer Compatibility: Designed to work with a variety of printers. See specifications below.
    Part #: FD2006IL

    $8695.00

  2. MBM Triumph 5260 20-3/8" Automatic Programmable Cutter with VRCut Software (CU0489)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0489

    $14299.00

  3. MBM Triumph 6660 25-1/2" Automatic Programmable Cutter with VRCut Software (CU0492)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Easy-To-Use Touchpad The programmable control module is equipped with a multilingual touchpad for easy operation. 99 programs with 99 steps in each can be stored in memory.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0492

    $16499.00

  4. MBM Triumph 5560 21-5/8" Programmable Hydraulic Paper Cutter with VRCut Software - V (CU0493)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0493

    $18299.00

  5. MBM Triumph 5560 LT 21-5/8" Programmable Hydraulic Paper Cutter with Air Tables and VRCut Software (CU0497)

    • Adjustable Hydraulic Clamp. Clamping pressure is fully adjustable between 1,900 and 3,800 psi.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Large 7-inch Touch Pad Extremely convenient: Programmable control module for the power backgauge with multi-lingual touch pad. 99 programs with 99 steps in each program can be stored.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0497

    $21999.00

  6. MBM Triumph 7260 28" Automatic Programmable Hydraulic Paper Cutter with VRCut Software (CU0494)

    • IR Safety Curtain. The IR light beam safety curtain covers the work area to ensure the highest level of operator safety.
    • Electronic Hand Wheel. The electronic hand wheel, with infinitely variable speed control, is used for manual back gauge positioning.
    • Easy Cut Blade Activation Bars. Patented EASY CUT blade activation bars ensure true, two-hand operation and allow blade and clamp to be activated independently.
    • Programmable Back Gauge The control module for the power back gauge can store 99 programs with up to 99 steps in each.
    • Tool Holder. Convenient, drop-in tool holder is located on the rear of the machine and keeps all tools necessary for routine maintenance (including blade changes) within reach.
    Part #: CU0494

    $26199.00

  7. PostMark 3068 High Speed Automatic Letter Opener (P-3068)

    • High Speed. Opens up to 40,000 envelopes per hour. Opens mixed mail -from the smallest to the largest - completely. Opens up to 1/3" (8 mm) thick envelopes. Entire system built to handle large flats and envelopes.
    • Heavy Duty. Solid metal construction throughout. Made of steel using the highest quality components. Has 2 motors for better performance and longer life.
    • Simple and reliable. High degree of operational reliability.
    • Easy to Operate
    • Options/Accessories. Counter and inkjet printer with dater, timer, numbering, bitmaps, and addressing capabilities (with complete software).
    Part #: P-3068

    $6400.00

  8. Formax ColorMaxLP Digital Color Label Printer (FDColorMaxLP)

    • High-speed color printing for a variety of inkjet-compatible label sizes and surfaces including gloss, semi-gloss, matte.
    • Full-color inkjet with Memjet® thermal technology.
    • Speeds of up to 12 inches per second / 60fpm.
    • Up to 1600 x 1600 dpi resolution.
    • LCD control panel with LED indicators.
    Part #: FDColorMaxLP

    $10600.00

  9. Proton T-1.5 Automatic Drawer-Style Hard Drive and Magnetic Media Degausser (PROTONT-1.5)

    • Destruction of confidential and sensitive data in accordance with the National Institute of Standards and Technology (NIST).
    • Meets US Department of Defense (DoD) and Defense Security Services (DSS) requirements for sanitizing unclassified data.
    • Provides compliance under regulations such as HIPAA, PCI DSS, GLBA, FACTA, etc.
    • Internal software requires all parameters (capacitor voltage, switch, etc.) are present prior to the “Go” LED display. If any problem exists that will compromise degaussing, the “Go” LED will not display. This software guarantees that each degauss cycle delivers sufficient strength and consistent performance.
    • Will erase any magnetic media that fits into drawer including all standard hard drives (laptop, desktop and network) and storage tapes (DLT, LTO, DDS/DAT, etc.).
    Part #: PROTONT-1.5

    $5168.00

  10. Proton T-4 Automatic Hard Drive and Magnetic Media Degausser (PROTONT-4IG)

    • Listed on the National Security Agency’s Evaluated Products List (NSA EPL-Degausser) and complies with DoD requirements for destroying classified information on magnetic media.
    • Internal software requires all parameters (capacitor voltage, switch, etc.) are present prior to the “Go” LED display. If any problem exists that will compromise degaussing, the “Go” LED will not display. This software guarantees that each degauss cycle delivers sufficient strength and consistent performance.
    • Patented “Reverse Polarity” Electro Magnetic Pulse (EMP) technology.
    • Fully automatic operation: no drawer to open and close, simply insert media into top slot and push start button.
    • Lightweight and portable design enables table top or floor operation.
    Part #: PROTONT-4IG

    $17758.00

  11. DFG PC 20 Semi-Automatic Hand-Feed Creaser with Strike Perforation (DFGPC-20)

    • Crease - up to 650 gsm (32 points) paper.
    • Paper size – up to 14.5" x 48".
    • Number of creases per sheet – up to 30 creases.
    • Crease depth control – fully automatic by software (based on paper weight).
    • UnibodySoftTouch creasing matrix – for long lasting and accurate creasing.
    Part #: DFGPC-20

    $6950.00

  12. DFG PC 10 Semi-Automatic Hand Feed Creaser (DFGPC-10)

    • Crease - up to 425 gsm (20 points) paper.
    • Paper size – up to 14.5" x 48".
    • Number of creases per sheet – up to 30 creases.
    • Crease depth control – fully automatic by software (based on paper weight).
    • UnibodySoftTouch creasing matrix – for long lasting and accurate creasing.
    Part #: DFGPC-10

    $4950.00

  13. Challenge Titan 200 TC 20" Hydraulic Programmable Cutter with Light Beams and Colored Touch Screen (CH-TITAN200TCL)

    • 20" Cutting Width
    • 10.5" Color Touch Screen
    • New Control System and Software
    • Ethernet and USB ports
    • Compatibility with .csv files
    Part #: CH-TITAN200TCL

    $17995.00

  14. Intimus TSi 2.5 Office Tabletop Folder / Inserter (A00715611)

    • The Convenient Solution For Folding And Inserting Your Mail. Imagine if you no longer had to prepare your mail by hand? The intimus TSI deals with the job for you, enabling you to perform other tasks. With its compact size and fold-away catch tray, this solution fits any office environment.
    • A Perfect Combination Of Convenience And Ease-Of Use. The intimus TSI is fully controlled from its new user interface, a modern colour touch screen with only two buttons. No more need for skilled operators – anyone can use it. Just load your documents and envelopes, and let the software guide you through adjusting the settings.
    • The Ideal Assistant In Any Office Environment. Combining ease-of-use and flexibility to save time and improve efficiency, the intimus TSI is compact and silent enough to suit any office environment.
    • A Versatile Workstation To Fulfill Your Needs. The intimus TSI can handle a wide range of documents, envelopes and even inserts or business reply envelopes. You can choose between four fold types according to your requirements. The automatic cascade feed function rules out down time thus optimizing productivity. The manual feed function allows you to feed up to five sheets for each mailing project, stapled or not.
    • Mail Integrity And Accuracy Guaranteed. The Double document control prevents double feeding. Its insensitivity to coloured paper and dust ensures complete reliability. The system guarantees that you will always send the right document to the right recipient.
    Part #: A00715611

    $4396.60

  15. TEMPbadge Non-Expiring Visitor Badge Log Book (500 Badges) (05751)

    • Perfect choice for those seeking a simple Visitor Management solution.
    • Feature 500 individual visitor badges that an organization can issue on an as-needed basis — no software or computer required!
    • Each badge can be customized with a pen, pencil or marker.
    • The information written on each badge is copied to a sheet of transfer paper below for easy record-keeping.
    • Great for organizations that want to add basic Visitor Management to their site but aren't ready to invest in a full-scale system.
    Part #: 05751

    $78.69

  16. Mactac IMAGin 2.6mil Gloss Clear PVC 54" x 164' Window Print Media (JX999R)

    • Physical Properties Property Typical Values Test Method Peel Adhesion lb./in. (N/25mm) 180° on glass - 24 hr. 0.45 - 1.4 (2 - 6) FTM - 1 Quick Tack, lb./in² (N/25mm) Glass max 0.5 FTM - 14 10" x 10" Sample Bonded to aluminum Temperature Ranges Minimum Application: End Use: 50°F (+10°C) -40°F to 194°F (-40°C to 90°C)
    • Approved Printing Processes: Screen Printing: HP Indigo No UV Cured No Off-set No Solvent No UV Off-set No Digital: UV Inkjet Yes Thermal Transfer Yes Eco-solvent Yes Flexographic* No True solvent Yes Laser No Latex Yes Jetrion Yes To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be obtained from our Distributors or can be downloaded from www.mactac.com . Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites. The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.
    • Durability The outdoor durability of the unprinted film is 5 years. JX999R has up to 2 year’s removability after application. Overlamination of the inkjet-printed material with Permacolor® or IMAGin overlaminates delays color fading that may occur over time. This color fading is mainly dependent upon the inks quality (see technical data sheets given by the ink manufacturers) and the pressure sensitive media being used.
    • Shelf Life 2 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.
    • Glass Breakage Mactac accepts no liability for glass breakage due to temperature differences across the glass which can be caused by sunlight on dark areas of the graphic. Size, thickness, quality of cut, edge treatment, tinting and frame design all effect temperature stress
    Part #: JX999R

    $507.00

  17. Graphtec Plus 24" Vinyl Cutter and Plotter with Stand (CE7000-60)

    • ARMS (Advanced Registration Mark Sensing system) functions are improved to version 8.0.
    • "Data link function", Barcode reader / Continuous cutting will improve productivity of cutting operation.
    • New function "1 Point Alignment" reduces the cutting operation time.
    • Graphtec original software Cutting Master 4 has been updated to support Adobe Illustrator trim marks.
    • Carrier sheet table which will helps stable die-cutting with carrier sheet is available for CE700-40 and 60.
    Part #: CE7000-60

    $1895.00

  18. Graphtec Plus 50" Vinyl Cutter and Plotter with Stand (CE7000-130)

    • ARMS (Advanced Registration Mark Sensing system) functions are improved to version 8.0.
    • "Data link function", Barcode reader / Continuous cutting will improve productivity of cutting operation.
    • New function "1 Point Alignment" reduces the cutting operation time.
    • Graphtec original software Cutting Master 4 has been updated to support Adobe Illustrator trim marks.
    • Carrier sheet table which will helps stable die-cutting with carrier sheet is available for CE700-40 and 60.
    Part #: CE7000-130

    $4695.00

Items 1-15 of 22

Display Type List Grid

Related Categories