Wrapping Systems

SealerSales 8" Shrink Wrapping Starter Kit w/ 6" x 6.5" CD Shrink Bags (SWK-8-04CD)

Starter sets come complete with a 8" hand sealer (FS) - FS-200rnd, heat gun (HG-1), and 500pcs 6" x 6.5") CD shrink bags .
Shrink wrapping is easy. There are three steps involved in shrink packaging:
Insert the item between the fold of film or into a shrink bag.
Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
Shrink the film on all sides with heat gun or shrink tunnel.

Part #: SWK-8-04CD

Come complete with a 8" hand sealer (FS) - FS-200rnd, heat gun (HG-1), and 500pcs 6.5" x 10.5" shrink bags.
Shrink wrapping is easy. There are three steps involved in shrink packaging:
Insert the item between the fold of film or into a shrink bag.
Use a sealer to cut off the excess film and seal by lowering the sealing bar of the sealer.
Shrink the film on all sides with heat gun or shrink tunnel.

Part #: SWK-8-04DVD

Preset lamination pressure and speed. Makes the machine easier to use and eliminates many possible sources of problems.
Enclosed laminating and pull rollers. Helps you avoid time-consuming jams and wrap-arounds.
Forced air cooling. Allows laminating with 3 and 5-mil films, as well as the 1.5 mil film often used by schools. Without a film cooling system, thicker films will warp and ripple because they are still hot and partly melted when they come out of the laminator.
Fixed-position lamination rollers. Provides a stable platform for uniform roll pressure which provides the highest quality lamination available in a school laminator.
Attached safety shield. The safety shield is fixed to the machine and is placed so that the operator will naturally put it in the guard position before laminating. The shield is made of clear polycarbonate so users can see their work and will not be tempted to try to laminate without the shield in its safe position.

Part #: 9025100D

Produce customized hard covers without messy glues, or heavy, expensive equipment.
The Image Wrapper is used with a template, Imageback Hardcover, and ImageBack Liners.
It’s a guide with a self-healing cutting matte for trimming and wrapping your printed cover sheet onto the Imageback Hardcover.
The finished covers are designed to work with all the Fastback® binding systems, including the Studio™ Binding System, Photobook Workcell™ System, and PhotoPress™ Binding.
Produce customized hard covers without messy glues, or heavy, expensive equipment.

Part #: PPImageWrapper

Binding single-sided prints. Use Fastbind FotoMount binding for single-sidedprints. With the new MountingWall system, it's easy to make exclusive-looking FotoMount binding.
180-degree-opening layflat albums. FotoMount binding is the optimal choice for high-endbusiness portfolios and premium photo albums.
Binding duplex prints. Use quick-and-easy BooXTer binding for duplex prints. The blue guide fingers in front ensure perfect alignment of both book block and staples.
Strong and beautiful books. BooXTer-bound books are stylish and durable. No worries about loose-leaf binding.
Case making and cover mounting. Making fully personalized wrap-around covers is easier than ever. Covermounting is easy and quick with preglued end sheets and position magnets.

Part #: FBExpressPlus