Xerox Laminator

Page
  1. Xerox Synthetic Paper 4.7mil 11" x 17" - 100pk (X3R12365)

    • Weather Proof: Able to withstand water, heat and temperature variations, suitable for indoor and outdoor uses
    • Durable: Tear proof, fade resistant
    • Harsh Environmental Performance: Grease, solvent, chemical, blood and sweat resistant
    • Restrictions: Not for use with ink jet printers
    • Promotes workflow efficiency: No need to laminate
    Part #: X3R12365

    $229.99

  2. Fujipla ALM Laminator Roll Film - 1.5mil Gloss 12.6" x 984' (DL-AG1U-15) (SAP38GLOSS)

    • Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP38GLOSS

    $103.85

  3. Fujipla ALM Laminator Roll Film - 3mil Gloss 12.6" x 492' (DL-AG1U-3) (SAP75GLOSS)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP75GLOSS

    $98.84

  4. Fujipla ALM Laminator Roll Film - 5mil Gloss 12.6" x 328' (DL-AG1U-5) (SAP125GLOSS)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP125GLOSS

    $94.75

  5. Fujipla ALM Laminator Roll Film - 1.5mil Matte 12.6" x 984' (DL-AM1U-15) (SAP38MATT)

    • Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP38MATT

    $225.97

  6. Fujipla ALM Laminator Roll Film - 3mil Matte 12.6" x 492' (DL-AM1U-3) (SAP75MATT)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator.
    • Designed and developed for On Demand Digital prints.
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints.
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F.
    Part #: SAP75MATT

    $165.09

  7. Fujipla ALM Laminator Roll Film - 5mil Matte 12.6" x 328' (DL-AM1U-5) (SAP125MATT)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator.
    • Designed and developed for On Demand Digital prints.
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints.
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F.
    Part #: SAP125MATT

    $136.75

  8. Fujipla ALM Laminator Gloss Roll Film (DL-AG1U)

    • Compatible with Fujipla ALM3220, ALM3230, ALM3222 Automatic Laminators. Note that product SAP250GLOSS is ONLY compatible with Fujipla ALM3222.
    • Designed and developed for On Demand Digital prints
    • ALM film are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: DL-AG1U

    $0.00

  9. Fujipla ALM Laminator Matte Roll Film (DL-AM1U)

    • Compatible with Fujipla ALM3220, ALM3230, ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM film are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: DL-AM1U

    $0.00

  10. Fujipla ALM Laminator Roll Film - 1.2mil Elegant Silk Matte 12.6" x 984' (ECO30SILKMATTE)

    • Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: ECO30SILKMATTE

    $245.35

  11. Fujipla ALM Laminator Roll Film - 3mil Elegant Silk Matte 12.6" x 492' (ECO75SILKMATT)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator.
    • Designed and developed for On Demand Digital prints.
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints.
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F.
    Part #: ECO75SILKMATT

    $171.40

  12. Fujipla ALM Laminator Roll Film - 5mil Elegant Silk Matte 12.6" x 328' (ECO125SILKMATT)

    • Compatible with Fujipla ALM3220 or ALM3222 Automatic Laminator.
    • Designed and developed for On Demand Digital prints.
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints.
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F.
    Part #: ECO125SILKMATT

    $159.35

  13. Fujipla ALM Laminator Roll Film - 10mil Gloss 12.6" x 165' (SAP250GLOSS)

    • Compatible with Fujipla ALM3222 Automatic Laminator Only
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: SAP250GLOSS

    $98.88

  14. Fujipla ALM Laminator Elegant Silk Matte Roll Film (ECOSILKMATTE)

    • Compatible with Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
    • Designed and developed for On Demand Digital prints
    • ALM films are ASAP Film (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
    • Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
    • Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
    Part #: ECOSILKMATTE

    $0.00

  15. Drylam 3mil 25" x 250' Gloss Super-Lam Thermal Film - 1" Core (DL-SG25203-1)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Film Finish:Clear
    • Core Size:1"
    Part #: DL-SG25203-1

    $77.09

  16. Drylam 1.7mil Gloss Super-Lam Thermal Film (DL-SG12)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Designed and developed for On Demand Digital prints
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    Part #: DL-SG12

    $0.00

  17. Drylam 3mil Gloss Super-Lam Thermal Film (DL-SG203)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Designed and developed for On Demand Digital prints
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    Part #: DL-SG203

    $0.00

  18. Drylam 5mil Gloss Super-Lam Thermal Film (DL-SG205)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Designed and developed for On Demand Digital prints
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    Part #: DL-SG205

    $0.00

  19. Drylam 5mil 25" x 200' Gloss Super-Lam Thermal Film - 1" Core (DL-SG25205-1)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Film Finish:Clear
    • Core Size: 1"
    Part #: DL-SG25205-1

    $92.98

  20. Drylam 1.7mil 25" x 500' Gloss Super-Lam Thermal Film - 1" Core (DL-SG25515-1)

    • Designed and developed for On Demand Digital prints
    • ASAP (Always Sticks to All Prints) adhesive is a major technological breakthrough
    • Superior adhesion to Xerox , Canon and most other hard to stick toner-based and digital prints
    • Film Finish: Clear
    • Core Size:1"
    Part #: DL-SG25515-1

    $92.47

Items 1-15 of 22

Display Type List Grid

Related Categories