2-1/4" x 3-3/8" Vertical Anti-Static Clear Vinyl Badge Holders - 100pk
32 NewCondition InStock

2-1/4" x 3-3/8" Vertical Anti-Static Clear Vinyl Badge Holders - 100pk

Part #: 1815-1101
Brand: MyBinding
1 Questions, 1 Answers
  • Color: Clear
  • Orientation: Vertical (Top Load)
  • Connectors: Sot with Chain Holes
  • Max Card Size: 2-1/4" x 3-3/8" (57mm x 86mm)
  • Price Match Guarantee
  • Ships Free Over $75
  • Brand New
In Stock

$32.00

FREE shipping for orders over $75*
SWIPE FOR MORE IMAGES
  • 0
  • 1
video

Product Description

These special anti-static badge holders are designed specifically not to generate static electricity. This makes them ideal for sensitive manufacturing environments or for use expensive electronic circuitry. These anti-static name badge holders are designed for use with standard ID badges. However, we also carry anti static badge holders for proximity cards. Check them out today and consider adding them to your manufacturing floor.

Product Details

  • Type: Anti-Static Badge Holders
  • Color: Clear
  • Orientation: Vertical (Top Load)
  • Connectors: Sot with Chain Holes
  • Max Card Size: 2-1/4" x 3-3/8" (57mm x 86mm)
  • Quantity: 100 Per Pack
  • Part Number: 1815-1101

Product Reviews

Write Your Own Review
You're reviewing:2-1/4" x 3-3/8" Vertical Anti-Static Clear Vinyl Badge Holders - 100pk
Your Rating

Demonstration Video

Transcript: These are Anti-Static Badge Holders! You can find them in Proximity, and clear vinyl?notice there is a slight shading difference. The proximity badges are actually a tad larger as well, good to know if you need it. Lets start off with Proximity. Insert your card into the top of the holder. Notice that the slot is on both sides?so when you take your badge reel or lanyard, it secures both covers together so your card cannot come out with it secured. Now, the distance from the slot and the edge is longer than others, which makes it difficult for certain attachments, like this bulldog clip(which d ... Read More
These are Anti-Static Badge Holders! You can find them in Proximity, and clear vinyl?notice there is a slight shading difference. The proximity badges are actually a tad larger as well, good to know if you need it. Lets start off with Proximity. Insert your card into the top of the holder. Notice that the slot is on both sides?so when you take your badge reel or lanyard, it secures both covers together so your card cannot come out with it secured. Now, the distance from the slot and the edge is longer than others, which makes it difficult for certain attachments, like this bulldog clip(which doesn?t fit). Even this swivel hook was tricky to get on. But the chain works fine if that?s what you?re using. With the Clear Vinyl, the slot is only on one side, and your cards fit more snugly. The card is also not completely covered, allowing for easy removal of it. All the attachments fit perfectly, too. On the back of the clear vinyl badge holder is also a slight textured pattern. They don?t generate static electricity and they display your cards brilliantly!

Questions & Answers

Yes you can use badges with a magnetic stripe in these badge holders. However, you will need to remove the badge from the holder in order to swipe it.

Answered by MyBinding.com
5 years ago

Submit a New Question