Fujipla ALM Laminator Roll Film - 3mil Gloss 12.6" x 492' (DL-AG1U-3) - 2 Rolls
- 0
- 1
Product Description
Product Details
- Designed and developed for On Demand Digital prints
- ALM films are ASAP Films (Always Sticks to All Prints) that are designed to bond to the hard to adhere to toner based digital prints.
- Superior adhesion to Xerox , Canon and most other hard to stick toner based and digital prints
- Typical running temperatures range from 210 - 270 degrees with the most common set point around 240 degrees F
Product Reviews
Item Specifications
- Film Type: ALM Roll FIlm
- Finishing: Gloss
- Thickness: 3 Mil
- Compatible Machine: Fujipla ALM3220, ALM3230 and ALM3222 Automatic Laminators
- Film Width: 12.6"
- Film Length: 492'
- Quantity: 2 Rolls
Demonstration Video
Fujipla ALM 3230 Overview Video
The huge advantage to this machine is how simple it is to get a fully laminated and trimmed project without doing any of the cutting yourself.
Before we set up the machine, I’m going to turn it on, and place the waste bin below the catch tray.
On the main display we see some different settings to adjust, such as the temperature, which is easily adjusted.
Other settings include setting the number of pages to run, setting a lamination margin or have it trim right to the edge of your project, and a ... Read More
This is the Fujipla ALM3230 Desktop Automatic Feed Laminator with an Integrated Trimmer!
The huge advantage to this machine is how simple it is to get a fully laminated and trimmed project without doing any of the cutting yourself.
Before we set up the machine, I’m going to turn it on, and place the waste bin below the catch tray.
On the main display we see some different settings to adjust, such as the temperature, which is easily adjusted.
Other settings include setting the number of pages to run, setting a lamination margin or have it trim right to the edge of your project, and a count of total projects and how much film a roll has.
Before lamination, make sure to close the rollers to the lamination position.
With the back cover open, now you’ll have to make some manual adjustments to the trimmer. This position is where it will cut the edges—it can be set for margins, or even through the project.
You’ll see some common sizes labeled for a cut with a margin, or a cut that trims at the edge of the project.
On the left is also a manual feed control, and a manual cutting control.
Back to the front, adjust the edge guides on the feed table for your project size. Do this on both sides.
Next, on the inside you can set project thickness with this little tab you move up or down—the normal paper thickness is labeled as such.
Before jumping into your real project, we recommend doing a test run. Push the table down, and insert your pages.
You’ll see it laminate and trim automatically. Where now you can evaluate if the measurements are equal and you can make any changes accordingly.
You’ll see I simply ran a test page with a margin, and one that is cut to the edge of the project.
If you need a micro adjustment, this little wheel moves the feed table from side to side in small increments.
Now I’m ready for my real project! And I can run up to a stack of 200 pages in one go. Can you imagine running a project of 200 pages, and never having to manually cut one yourself? It’s a huge time saver!
It can be place on any table, or you can purchase it’s own stand with extra room for the trimmings, and it adds a level of portability!
And that is the Fujipla ALM3230 Desktop Automatic Feed Laminator with an Integrated Trimmer!
-
![5 Mil Standard Roll Laminating Film - 1]()
5 Mil Standard Roll Laminating Film - 1" CoreStarting At: $38.49
-
![10 Mil Standard Roll Laminating Film - 1]()
10 Mil Standard Roll Laminating Film - 1" CoreStarting At: $51.49
-
![Laminating Workstation]()
Laminating Workstation$321.49
-
![Sooper Media Roll Clips]()
Sooper Media Roll ClipsStarting At: $30.20
-
![Core ID Cards for Vinyl Rolls]()
Core ID Cards for Vinyl RollsStarting At: $11.69
