Artshield Satinex UV 3mil Overlaminating Film
150.22 582.04 7

Artshield Satinex UV 3mil Overlaminating Film

Brand: Drytac
1 Questions, 1 Answers
  • Film Finish: Semi-Gloss
  • Film Thickness: 3mil
  • Intial Tack: Low
  • Dwell Time: 2-6 minutes
Starting At

$150.22

Choose Product Below
SWIPE FOR MORE IMAGES
  • 0
  • 1

Product Description

This Artshield Satinex UV Overlaminating Film is a 3mil Heatset PVC (vinyl) semi-gloss laminating film that provides excellent UV protection. The Artshield Satinex UV is perfect for enhancing posters, digital prints and photographs. This Artshield Satinex UV can be applied in laminating fabrics, canvas, and raised surfaces such as leaves and dried flowers.

Product Details

  • Finish: Semi-Gloss PVC
  • Film Length: 50' (15m) - 300' (91m)
  • Film Width: 25.5" (648mm) - 51" (1300mm)
  • Film Thickness: 3mil
  • Base Film: 2.0 mil (50 micron) PVC (vinyl)
  • Adhesive: 1.0 mil (25 micron) solvent acrylic
  • Release Liner: Moisture stable paper
  • Initial Tack: Low
  • Application Temperature: 185°F-210°F (85°C-99°C)
  • Dwell Time: 2-6 minutes
  • Application: Fine Art Prints, Picture Framing/Photography, Plaque Mounting

Product Reviews

Write Your Own Review
You're reviewing:Artshield Satinex UV 3mil Overlaminating Film
Your Rating

Technical Data

Artshield Satinex is a 2 mil (50µ) UV stabilized, pre-perforated clear PVC laminating film with a semi-gloss finish, coated on one side with a heat activated solvent acrylic adhesive that is protected by a moisture stable bleached Kraft gridded release paper coated on one side with siliconized PE.

Typical Applications
  • Enhances posters, digital prints and photographs.
  • Ideal for laminating fabrics and canvas, and protecting raised surfaces, such as leaves and dried flowers.

Product Structure

FilmSemi-Gloss Perforated PVC
AdhesiveSolvent Acrylic (Heat Activated)
Release Liner1 Side PE Coated Bleached Kraft Grid Paper (Moisture Stable)


Physical Characteristics

Film Thickness2 mil (50µ)
Adhesive Layer1 mil (25µ)
Film/Adhesive Ratio2:1
UV Protection FactorFilm contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image
Outdoor DurabilityNot Applicable
Service Temperature Range-4°F to 203°F (-20°C to 95°C)
Peel Strength (20 min, FTM1)18 N/25mm
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment TypeTemperatureDwell Time
Roller LaminatorNot recommended
Press185°F to 210°F (85°C to 99°C)2-6 minutes

Downloadable Information

Questions & Answers

Thank you for your question. Unfortunetly we do not have any thermal film with a texture. You are able to find our full selection of textured cold pressure sensitive film here .

Answered by MyBinding
2 years and 10 months ago ago

Submit a New Question