The Challenge MS-5 Multi-Spindle Paper Drill has a maximum of five easily adjustable heads and can handle multiple various hole patterns in one single stroke. The MS-5 Paper Drill has a solid cast-iron construction and a powerful 1.5 hourse power motor that drives the drilling heads. Its easily accessible control panel and powerful hydraulic operation are designed to reduce operator fatigue and increase job production. With Challenge MS-5 Multi-Spindle Paper Drill, you have assurance that you made the right decision.
This product is currently only available to our customers in Oregon, Washington, and Idaho.
Product Details
Side guide adjustment.
Backgauge adjustment.
Easy drill length adjustment.
2"/ 5.1 cm hollow drill bits available in 13 sizes.
2-1/2"/ 6.4 cm hollow drill bits available in 4 sizes.
Hollow drill bits also available with teflon coating.
Cast iron and steel construction.
Three drill heads and drilling blocks standard (Two & four head options for European applications).
Two backgauge filler blocks.
Manual drill sharpener.
Chip disposal bag.
Hydraulic power, foot pedal activated.
Automatic table return.
Up to 5 holes in a single stroke.
Set-up changes are quick & simple.
Item Specifications
Number of Drill Heads: 2 to 5
Drill Sizes Available (2" capacity): 1/8" to 1/2" / 3 to 13 mm
Drill Sizes Available (2-1/2" capacity): 1/4" to 1/2" / 6 to 13 mm
Center to Center Distance Maximum: 15" / 38 cm
Center to Center Minimum (standard): 1-7/8" / 48 mm
Center to Center Minimum (optional narrow heads): 1-3/8 / 35 mm
Maximum Drilling Capacity: 2-1/2" / 63 mm
Strokes per Minute (adjustable): Up to 18
Backgauge Adjustment: 0 to 5" / 0 to 13 cm
Vertical Adjustment of Individual Heads: 1/4" / 6 mm
Manufacturer's Warranty: 3 Years Manufacturer Manufacturer's Warranty
Demonstration Video
Challenge MS-5 Multi-Spindle Paper Drill Demo
Transcript :
Challenge MS-5 Paper Drill
The Challenge Machinery Company
The MS-5 multiple-spindle paper drill
Another quality product for Challenge Machinery
The MS-5 draws its strength from solid cast-iron construction
A powerful 1-1/2 h.p. motor drive the drilling heads
Integrated head positioning scale
Positioning or adding drilling heads takes mere seconds
Intuitive control layout
Table speed adjustment for difficult materials
Overall table height adjustment
Fine adjustment of individual drill depth
Integrated chip chute guides scrap to rear-mounted waste bin
With automatic table retur ...
Challenge MS-5 Paper Drill
The Challenge Machinery Company
The MS-5 multiple-spindle paper drill
Another quality product for Challenge Machinery
The MS-5 draws its strength from solid cast-iron construction
A powerful 1-1/2 h.p. motor drive the drilling heads
Integrated head positioning scale
Positioning or adding drilling heads takes mere seconds
Intuitive control layout
Table speed adjustment for difficult materials
Overall table height adjustment
Fine adjustment of individual drill depth
Integrated chip chute guides scrap to rear-mounted waste bin
With automatic table return, the MS-5 is designed for high-production drilling
Rock-solid construction and reliability
Up to five drilling heads with 2-1/2” (63 mm) drilling capacity per stroke
Use of our narrow drilling heads allows for medical forms drilling
With the MS-5, you will not compromise
You have assurance you made the right decision
