Challenge Side Guide Stops for Handy Drill
5.25 NewCondition InStock

Challenge Side Guide Stops for Handy Drill

Part #: 05CHLS16111R
Brand: Challenge
  • Price Match Guarantee
  • Ships Free Over $75

$5.25

FREE shipping for orders over $75*

  • 0
video
Product Name Item Number Price Qty
Challenge Handy-Drill Single Spindle Paper Drill CH-HANDYDRILL
$2,145.00
1-1/2" x 3/4" Wood Drill Blocks - 12pk DBL-1
$23.79

Product Description

Challenge Side Guide Stops for Handy Drill

Demonstration Video

Transcript: Welcome to MyBinding video. This is the Handy-Drill, a single spindle paper drill by Challenge. If you’re tired of the price and inconvenience of outsourcing paper drilling or you’re looking to be creative and you need new holes, new sizes and new locations, a paper drill might be your best answer. The Challenge Handy-Drill could be a great start, great replacement or great second machine. It comes with a built in large work table at 18” x 19” and has plenty of measuring tools so your drilling is precise. The challenge handy drill has 2 ½” lift capacity with plenty of sizes in the 2” and 2 ½” ... Read More
Welcome to MyBinding video. This is the Handy-Drill, a single spindle paper drill by Challenge. If you’re tired of the price and inconvenience of outsourcing paper drilling or you’re looking to be creative and you need new holes, new sizes and new locations, a paper drill might be your best answer. The Challenge Handy-Drill could be a great start, great replacement or great second machine. It comes with a built in large work table at 18” x 19” and has plenty of measuring tools so your drilling is precise. The challenge handy drill has 2 ½” lift capacity with plenty of sizes in the 2” and 2 ½” drill bits. Here at MyBinding we’re committed to you as a customer for the long haul so we have all of these supplies that you may need down the road to expand or replace. This machine is built with simplicity and ease in mind and a single knob at the top allows you to make minor adjustments to the height of your drill bit from the floor of the machine. Very convenient screw on the front allows you to remove the chip trays right there in front and access drill bit for easy removal, replacement and sharpening. Blade sharpening and bit clearing is very important in the process of paper drilling. We’ve also created an entire video for this machine on how to care for and make adjustments to it. In terms of precision of drilling, there are four customizable adjustable backgauge stops. You simply measure where you want your holes to be and screw them down tight. The entire backgauge is like a fence that slides forward and backward for full depth of margin control. When you purchase the Handy-Drill, everything is in the box that you need to get going. ¼” and 5/16” hollow drill bits, two wood drilling blocks, trip backgauge, manual and a tool kit for adjustments and maintenance. Safety was thought off in building this machine. There’s an auto shut-off built right into the lever and it keeps hands clear of the work space. Here at MyBinding we are serious about our customer service. If you have any questions at all, just give us a call and we can walk you through this machine or another and find exactly what it is that you need. That’s the Challenge Handy-Drill. Happy drilling. For more demos, reviews and how-to’s, check out MyBinding.com.
Transcript: Welcome to MyBinding video. So you’ve got the Challenge Handy-Drill and you have a few questions on maintenance. You’re in luck, this video is here to help you understand how to adjust and care for your Challenge Handy-Drill. Let’s begin with the wood drilling blocks. First of all, we hope that you’re using a chip board just above that wooden block. The goal is to actually never to make contact with the block and just a little bit into the chip board below your paper stack. However, eventually everyone goes through it at some point and the wood block is damaged. You can start by flipping the b ... Read More
Welcome to MyBinding video. So you’ve got the Challenge Handy-Drill and you have a few questions on maintenance. You’re in luck, this video is here to help you understand how to adjust and care for your Challenge Handy-Drill. Let’s begin with the wood drilling blocks. First of all, we hope that you’re using a chip board just above that wooden block. The goal is to actually never to make contact with the block and just a little bit into the chip board below your paper stack. However, eventually everyone goes through it at some point and the wood block is damaged. You can start by flipping the block over and also purchasing extra replacement blocks. Make sure you get the right size for your machine. You need to be completely flushed with the worktable. Again, set your drill height so that makes just contact with the chip board. All the punched chips will pop out into the small containers right above the drill bit. Loosening the knob right in the front of the machine between the two spiral spindles you can remove either or both sides of the box. Removing the front box also gives you access to the drill bit itself. With the tool provided and the lower hole, insert the tool and simply pop out the drill bit. You’re now free to make sure that drill bit is completely clear. Here at MyBinding we do sell a drill bit clearer and it’s useful for most sizes and it is really important that you keep the drill bit clear. Those chips can gather up, compact and do damage. And should you purchase our drill bit clearer, you could do it by hand or even with the machine itself, you could simply lower the lever down and clear it that way. The Challenge Handy-Drill uses hollow drill bits. Here at MyBinding we carry quite a number of options to meet your needs. We carry standard, coated and premium drill bits in various sizes. As you well know, the cutting or drilling of paper dulls blades fast. It’s crucial that you keep your blades nice and sharp. There are at least two ways to do this. One is with a hand sharpening drill or a simple machine known as a drill bit sharpener. In goes the drill bit on one side, it holds it steady while the driller on the other side simply twists the knob, sharpening things up. This way is certainly more precise and easier with multiple spindles. If you haven’t learned by now, make sure that both sides of the boxes are on and that knob is good and tight, otherwise not everything works. It’s part of its safety shutoff feature. Your paper drill is a machine doing a lot of hard work. You’ll want to keep it lubricated. Drill-Ease is a wax style drill lubricant that’s shaped kind of like a large chopstick. With the drill on, simply hold it just to the bottom and let it spin its way to ultra smoothness. And finally, if your Trip Backgauge is getting a little wiggly, you just need to maintain it by using the tools provided and screw down those bolts. There you go. If you have any questions at all, give us a call. Happy drilling. For more demos, reviews and how-to’s, check out MyBinding.com.

Questions & Answers

Submit a New Question