0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Fastback ImageBack 8" x 12" Landscape Hard Covers
$216.99
Fastback ImageBack 8" x 12" Landscape Hard Covers

Fastback ImageBack 8" x 12" Landscape Hard Covers

Brand: Powis Parker
0 Questions, Ask a Question
  • Customize front, spine, and back with your own image
  • Fits 8" x 12" landscape
  • Available in 3 different sizes
  • Comes in packs of 25
Starting At

Your Price: $216.99

Choose Product Below
Product Item Number Price Qty
Fastback ImageBack 8" x 12" Landscape Hard Covers (1/2" Spine B) - 25pk Item Number : HBIBB-LX Price :

Your Price: $216.99

Qty :
Fastback ImageBack 8" x 12" Landscape Hard Covers (3/4" Spine C) - 25pk Item Number : HBIBC-LX Price :

Your Price: $216.99

Qty :
Fastback ImageBack 8" x 12" Landscape Hard Covers (1" Spine D) - 25pk Item Number : HBIBD-LX Price :

Your Price: $216.99

Qty :

ProductDescription

Create your own hardcover book in less than a minute with these Fastback ImageBack 8" x 12" Landscape Hard Covers . These ImageBack covers comes with the adhesive already applied, so all you have to do is add your printed cover sheet. In addition to ImageBack hard covers, Fastback offers a Hardcover Guide to aid in proper assembly, Foilfast Title Sheets for a unified first impression, and Headbands for that final decorative touch. Check them out today!
*Note that certain styles of Fastback Hard Covers can take between 2-3 weeks to ship. Please call for availability.

Product Details

  • Type: Fastback ImageBack Hard Cover
  • Window Specs: No Window
  • Size: 8" x 12" Landscape
  • Width: B-D
  • Quantity: 25 per pack

ProductReviews

There are No Reviews on this Product Yet

Be the first to review this product

  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

How to Make A Custom Hard Cover

Transcript: Hello and welcome to MyBinding video, today we are going to have a look at the Powis Parker image wrapper, and the question everyone asks, How do I wrap my own hard cover book? This video is designed so you can watch just how the machine you are investing in works and how to do it step by step. This is the image wrapper, it has a built-in self-healing mat on the top and uses designing template plates to do the work. They come in various sizes including twelve by twelve, eight by ten and standard eight and a half by eleven, that’s what we will be using today. Included with your machine is a r... Read More
Hello and welcome to MyBinding video, today we are going to have a look at the Powis Parker image wrapper, and the question everyone asks, How do I wrap my own hard cover book? This video is designed so you can watch just how the machine you are investing in works and how to do it step by step. This is the image wrapper, it has a built-in self-healing mat on the top and uses designing template plates to do the work. They come in various sizes including twelve by twelve, eight by ten and standard eight and a half by eleven, that’s what we will be using today. Included with your machine is a reference card going through the steps you are about to see. This is an image back hard cover blank and the outside here peels back and reveals an adhesive edge. Next are the adhesive end sleeves that we will use at the end of the project, and finally this is the cover. We have designed ours with our own logo and look to it and built it on the eight and a half by eleven template size. We’ve laminated one side and the other side is left blank. The dotted line right down the center of the template is really important. Be sure that the center of your spine goes right down that line, and everything inside the dotted line around the outside of the plastic template will be what is seen on the front and back cover. With the straight edge cut all the way around the plastic template nice and close to the edge. When you are all done peel away your scraps, you’re set and ready to wrap. You can set both the template and your project to the side for now and pick up you cover blank. It’s a good idea to take your blank and initiate those creases and crimps just a little bit more so they are nice and soft when you go to work with it. Open up your blank and lay it flat on your work table. With a straight edge lift just the corner of the adhesive and bend it back. This will expose the adhesive surface that you need for your cover. Continue to do this, all the way around the circumference of your board. Be careful when using straight edges and handle your product carefully. When all the sides are released flip your project over, bring the project down to be with the bottom of the work surface and place it just in to that green ledge. Slide the clamp from the left hand side into place so it holds it nice and steady. Now we are almost ready for your custom cover, here is a tip to make things easier, pull back that right side just a little bit more and lay your cover down on top of the whole thing. Make sure that bottom edge is right along the straight edge at the bottom of the machine. Press down on the right hand side so the adhesive begins and then flipping back the page you can simply remove the sheet underneath your cover. Sliding with one hand and pressing and pushing out all the air bubbles as you go with the other hand you can move your way all the way across to the center of the book. This is a great step for patience, really work the adhesive especially at the spine point deep into that cover, and then picking up the next sheet begin to slide it off and work all the way across to the left side of the book. Again looking for and working out any air bubbles as you see. Once that section is all done and everything is very smooth gently lift up your project and flip it over face down. Remove the rest of the paper, it’s time to finish off your edges. This is where the table top as well as the green plate of the bottom come in handy. You can fold over the edge just like this by pressing an end onto the plate and or bring it down into the green ledge, it holds it in tight as you fold it nice and firm. Spend some time with each crease it makes all the difference in the world. This is when the soft pressure roller plates come into play. They really center you down and hold it fast. No need to mess with them they work on their own with just a little bit of downward force. When one edge is nice and sealed fold in the sides of the corners of that edge and then move your way around the rest of the document. Crimping increasing with the pressure rollers after each fold. When all four sides are done, now is a good time to roll the entire document through the pressure rollers straight through. You can do it vertically and horizontally. This really seals things in, pushes out the rest of the bubbles and makes it nice and tight. This is where the hand wheels on the side can come into play, don’t force your document through just roll it on through, and there you go, very impressive, you are almost done. Now for the inside sleeves to give that perfect finish look. Each inside sleeve has both a long and a short edge. With a straight edge lift up that short end and pull it down, do a nice crease about a half an inch across. With the book cover facing down and flash against the bottom edge of the machine, and with the sticky side of the inside faced down all the way to the bottom, lay it onto the back side of the cover. Make sure it’s centered both left and right. And as you remove the bottom sheet, slide and push with your hand all the air bubbles out as you move up with the outer sheet. You are looking great and you are almost done. Simply repeat the same thing with the other side, there it is you are all done. You’ve created your own perfect custom hard cover book cover with the Powis Parker image wrapper. For more demos, reviews and how tos’ check MyBinding.com.

Specifications

ThicknessPart NumberSizeWith WindowsQuantity
1/2”HBIBB-LX8.5" x 12" LandscapeNo25pk
3/4”HBIBC-LX8.5" x 12" LandscapeNo25pk
1”HBIBD-LX8.5" x 12" LandscapeNo25pk
Questions & Answers
No question have the been asked yet.
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit