We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
Fastbind Case Express 3030 Case Maker
- 0
- 1
Product Description
Product Details
- Covers and Cases Easier Than Ever! By using the Fastbind Blank Case supplies you can produce hard covers and cases faster and easier than ever! The pre-assembled cases eliminate the need & time to position binder boards, making this the fastest and easiest hard cover maker available today!.
- Versatile Applications. The applications are virtually unlimited: books and photo book covers, CD, DVD and Blu-ray cases, ring binders, punch binding covers and many more. It is the ideal solution for photographic studios, photo labs and professional photographers as well as digital printers, copy shops and on-demand publishers.
- Quick and low-cost solution to make custom printed hard covers.
- High quality results with Fastbind Blank Case supplies.
- Built-in cutting guide, folding unit and utility knife.
- Compatible with Fastbind BooXTer and Hot Melt binders using Fastbind Blank Case and Express Lami supplies.
Item Specifications
- Applications: Printed hard covers
Printed ring binders
Printed DVD / CD covers - Production Capacity (up to): One case in 30 seconds
100 cases / hour - Operation: Manual
No electricity needed
No heating needed - Edge Folding Unit: Integrated
- Edge Folding mMrginal: Adjustable 11-25 mm
- Corner Cutting Guide: Integrated
- Box Knife for Corner Cutting: Included
- Cutting Stick: Included (long lasting cutting stick with 8 wearing surfaces)
- Tacking Sheet Positioning: With adjustable guides
- Compatible With (not included): Fastbind Express Blank Case Sets
Fastbind Tacking Sheets (inkjet, laser and Lamifree) - Supported Tacking Sheet Laminating Options (May vary according to printer used),
laminator Not Included: Hot Roll lamination
New: Pouch lamination with Fastbind Express Lami Pouches
New: Lamifree (no lamination needed with laser printing) - Max Cover Size (W x L): 305 x 305 mm / 12 x 12"
- Max Finished Case Size, Opened (W x L): 635 x 316 mm / 25 x 12.4"
- Max Print Size: 685 x 366 mm / 27 x 14.4"
- Edge Folding Marginal: Adjustable 11-25 mm / 0.4-1 inch
- Machine Dimensions (W x D x H): 950 x 530 x 170 mm / 37.4 x 12.9 x 6.7"
- Box Dimensions (W x D x H): 1000 x 590 x 210 mm / 39.4 x 23.2 x 8.3"
- Net/Gross Weight: 14.5/16.5 kg / 31.9/36.4 lbs
- Part Number: FBCE3030
Demonstration Video
First take a printed tack sheet, place it against the guides and clamp it down. Slide your hard cover over the clamp, align it properly, stick the cover to the tacking sheet and slide it all away from the clamp.
After making sure it the tacking sheet is securely on, cut the covers of the sheet.
Now, insert the two longer edges in between the soft pads to fold the tacking sheet over the hard cover edges.
Press the overlaying tacking sheet corners, created by our first folds, onto the u ... Read More
This is the Case Express 3030 Case Maker. We’re going to demonstrate here how to make a ring binder.
First take a printed tack sheet, place it against the guides and clamp it down. Slide your hard cover over the clamp, align it properly, stick the cover to the tacking sheet and slide it all away from the clamp.
After making sure it the tacking sheet is securely on, cut the covers of the sheet.
Now, insert the two longer edges in between the soft pads to fold the tacking sheet over the hard cover edges.
Press the overlaying tacking sheet corners, created by our first folds, onto the unfolded end so it does not fold awkwardly at that point. Then fold the other edges on.
Take your inside printed tacking sheet and align it up. Place magnets on to hold it in place, remove part of the contact sheet to stick it to the cover
For best results, run the cover through a large enough pouch laminator, holding the tacking sheet so the tacking sheet is smoothly applied to the cover. The extra heat will help with the quality of the final look, too.
Fold your binder together.
Now take a pen and punch holes where the rings will be screwed on to. Proceed to screw your rings in place.
And now it’s finished! A beautiful hand made, fully customized ring binder!