Fellowes 12 Inch Replacement Cutting Strips 3pk - 5411504
8.99 NewCondition InStock

Fellowes 12 Inch Replacement Cutting Strips 3pk - 5411504

Part #: 5411504
Brand: Fellowes
  • Width: .37"
  • Length: 14.87"
  • Models Compatible With: Fellowes Electron, Proton, Neutron and Neutron Plus
  • Quantity: 3 per box
  • Price Match Guarantee
  • Ships Free Over $75

$8.99

FREE shipping for orders over $75*

SWIPE FOR MORE IMAGES
  • 0
  • 1
  • 2
video

Product Description

Fellowes high quality SafeCut rotary trimmer replacement cutting strips help to maintain clean cuts on your 12" rotary trimmer, even after frequent use. Both sides of the strips are useable, resulting in extended product life, and come in packs of 3. Use them with Fellowes Electron, Proton, Neutron and Neutron Plus trimmers.

Product Details

  • Width: .37"
  • Length: 14.87"
  • Models Compatible With: Fellowes Electron, Proton, Neutron and Neutron Plus
  • Quantity: 3 per box
  • Part Number: 5411504

Demonstration Video

Transcript: Welcome to MyBinding video. This is a look at the Fellowes SafeCut Replacement Cutting Mats. In both 12 and 18 inches in length, they're made for the Electron, Proton, Neutron, and Neutron Plus rotary trimmers. They are a breeze to use and easy to install. Cutting mats always wear out with wear and tear and for the 12 inch, or the 120 models, simply pull out from the little divot there and give the mat a tug, it should slide right out. For the 120 model, it's an even switch. For the Neutron and Neutron Plus, you'll need to snip off one end. Simply take a new one, line it up with the old one, a ... Read More

Welcome to MyBinding video. This is a look at the Fellowes SafeCut Replacement Cutting Mats. In both 12 and 18 inches in length, they're made for the Electron, Proton, Neutron, and Neutron Plus rotary trimmers. They are a breeze to use and easy to install. Cutting mats always wear out with wear and tear and for the 12 inch, or the 120 models, simply pull out from the little divot there and give the mat a tug, it should slide right out. For the 120 model, it's an even switch. For the Neutron and Neutron Plus, you'll need to snip off one end. Simply take a new one, line it up with the old one, and make your cut. The whole thing slide right back into the groove, press it all the way down and you're all set. For the 180 models you need the 18-inch strip. The replacement is done in much the same fashion. With the blade out of the way, lift and pull; it's a little bit harder but there are more grooves. Slide it all the way out, replace it with the new one, push it all the way down, and you're set. Those are the Fellowes SafeCut Replacement Cutting Mats. For more demos, reviews, and how-tos, check out MyBinding.com.

Questions & Answers

Submit a New Question