FloorTac 3.2mil 54" x 150' Matte White Printable PVC Film with Removable Adhesive
231.43
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
FloorTac 3.2mil 54" x 150' Matte White Printable PVC Film with Removable Adhesive
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
The FloorTac 3.2mil 54" x 150' Matte White Printable PVC Film with Removable Adhesive is specifically designed for floor graphics. It can be used with solvent, eco-solvent, latex, and UV printers.This FloorTac 3.2mil 54" x 150' Matte White Printable PVC Film with Removable Adhesive is ideal for short-term floor graphic advertising and is recommended for use with Drytac's Emerytex laminating film or other floor approved laminate to provide slip resistance.
Product Details
- Printable polymeric PVC film
- Utilizes a removable acrylic adhesive
- White matte finish available
- Compatible with (eco) solvent, UV and latex printers
Features:
- No-lift adhesive technology makes it ideal for short-term indoor floor advertising
- Recommened to be paired with Emerytex® overlaminate
- Ideal for applications where graphics are applied to floor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo
- Warrantied for 6 months of indoor use when combined with Drytac’s Emerytex® laminating film
Benefits:
Item Specifications
- Size: 54" x 150'
- Thickness: 3.2mil
- Film: Matte White Finish
- Adhesive: 1mil Removable Aqueous Acrylic
- Release Liner: 90 # Poly Coated Kraft
- Application: Floor Graphics
- Part Number: PFL54150-3.5MWR
Technical Data
FloorTac is a 3.2 mil (80µ) printable matte white polymeric PVC film with a removable, pressure sensitive gray acrylic adhesive protected by a poly coated Kraft release liner. It is recommended for use with Drytac’s Emerytex laminating films to provide slip resistance.
Typical Applications
Print Compatibility
Product Structure
Physical Characteristics
Overlaminate Recommendations
When using FloorTac, an overlaminate can be used for maximum life expectancy. Products recommended for use with FloorTac are Drytac’s Emerytex overlaminates.
Installation Recommendations Please see FloorTac installation instructions for further details. The surface must be clean and smooth and free of defects before application.
Typical Applications
- Ideal for short-term indoor advertising where graphics are applied to fl oor or ceramic tiles, sealed wood or concrete, waxed vinyl, marble, or terrazzo.
- Ideal for use in schools, hospitals, supermarkets, and restaurants.
- Suitable for medium foot traffi c areas.
- Use in combination with Drytac’s Emerytex laminating films for an approved slip-resistant fi nish.
- For best results, leave a 0.25” (6mm) non-printed border around the edge of the image.
Print Compatibility
- (Eco) Solvent
- Latex
- UV
Product Structure
Film | Matte White Polymeric PVC |
---|---|
Adhesive | Acrylic (Pressure Sensitive) |
Release Liner | 90# Poly Coated Kraft |
Physical Characteristics
Film Thickness | 3.2 mil (80µ) |
---|---|
Adhesive Layer | 1 mil (25µ) |
Film/Adhesive Ratio | 3.2:1 |
UV Protection Factor | Not Applicable |
Outhoor Durability | Not Applicable |
Application Temperature | >-4°F (-20°C) |
Service Temperature Range | -22°F to 302°F (-30°C to 150°C) |
Shelf Life | Use within 1 year after opening original box |
Storage Conditions | 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity |
Overlaminate Recommendations
When using FloorTac, an overlaminate can be used for maximum life expectancy. Products recommended for use with FloorTac are Drytac’s Emerytex overlaminates.
Installation Recommendations Please see FloorTac installation instructions for further details. The surface must be clean and smooth and free of defects before application.