Product Details

• Maximum cutting speed is 750mm/s (Table top type cutting plotter with excellent cost performance). Flatbed cutting plotter is used for not only sign making but also for a wide range of industrial applicaitons and processes. Max.750mm/s cutting speed is useful for getting high productivity. FC4500 Series are professional flatbed cutting plotters capable of processing a wide variety of materials with accuracy. Compact size that can be set on a table with precise control of contour cut, half cut, perforated cut, and plotting.this FC4500 Series is the most economical solution for cutting thick, hard materials that cannot be fed through a grit rolling type cutting plotter.
• Media hold-down method. It is very important to select exact media hold-down method in order to perform a precise cut. FC4550 Series provide the following method to fit a variety of media.
• NEW! Low tack cling mat (CM-0004). The media is held by the dot shaped adhesive material on the low tack cling mat. Low tack cling mat size: 17.126 in x 24.0157 in, thickness 0.4 mm. It is suitable for plastic film based media.
• NEW! Micro suction cling mat (CM-0005). The media to be cut is held to the cutter by the micro-sucker on the cling mat. Micro suction cling mat size: 17.126 in x 24.0157 in, thickness 0.8 mm. It is suitable for paper based media.
• Adhesive mat (CM-0002). The media to be cut is held to the cutter by the sticky soft plastic mat. Adhesive mat (soft mat for making the creasing) size: 17.126 in x 24.0157 in, thickness 1 mm. It is suitable for cardboard.
• Adhesive sheet (CM-0003). The media to be cut is held to the cutter by the pressure-sensitive adhesive on the adhesive sheet. Adhesive sheet (double-sided adhesive coated sheet) size: 21.45 in x 65.6 ft. It is suitable for harder media that needs higher cutting forces.
• Suitable materials (MEDIA).
  
  • Marking film, PVC (Vinyl) - Labels/stickers, Film/paper - High-intensity reflective film - Cardboard (Paper articles, POP, POD)
  • Paper with lamination - Micro flute board (F/G grades)

• Configuration: Digital servo system, Flatbed
• Media hold-down method: Adhesive sheet / mat
• Effective cutting area: 860 x 600 mm (33.8 x 23.6 inch)
• Mountable media: 666 mm (26.2 inch) (Y-axis direction)
• Media type:
  
  • Marking film (vinyl, fluorescent, and reflective)
  • Stiff paper/card (for stencils, etc.) up to 0.5 mm thick (The CB15U or CB15U-K30 cutter blade is used.)
  • Polystyrene foam sheets up to 0.8 mm thick (The CB15U-K30 or CB15U-K20 cutter blade is used.)
  • Sandblast rubber sheets up to 1.0 mm thick (The CB15U-K30 or CB15U-K20 cutter blade is used.)
  • Microflute board (F/G grades)
  • Clear sheets for plastic boxes
  • High-intensity reflective film (The CB15UA cutter blade is used.)
• Maximum cutting speed: 750 mm/s (30 inch/s) (1 to 75 cm/s in 23 steps)
• Cutting pressure: Tool 1, Tool 2: Max. 5.88 N (600 gf), in 48 steps
• Minimum character size: approx. 5 mm square (varies with the character font and media)
• Mechanical resolution: 0.005 mm (5µm)
• Programmable resolution: GP-GL mode: 0.1/0.05/0.025/0.01 mm, (HP-GL is registered trademark of the Hewlett-Packard Corporation of the United States.) : 0.025 mm
• Distance accuracy: Max 0.2% of the distance moved or 0.1 mm, whichever is larger (When operated with Graphtec specified media and conditions.)
• Perpendicularity: Max 0.4 mm / 610 mm
• Repeatability: Max 0.1 mm (When operated with Graphtec specified media and conditions.)
• Standard interfaces: RS-232C, USB2.0 (High speed)
• Buffer memory: 2 Mbyte
• Command sets: GP-GL and [HP-GL is registered trademark of the Hewlett-Packard Corporation of the United States.] emulation (selected by menu)
• Number of tools: 2 tools
• Cutter blade, pen, and tool types:
  
  • Cutter blade: supersteel
  • Pen: oil-based ballpoint pen
  • Creasing/scoring tool
• Others: ARMS (Advanced Registration Mark Sensing System), Reverse-side cutting and creasing with ARMS, Copy function, Creasing function, Repeatedly cut function
• Power supply: 100 to 240 VAC, 50/60 Hz (Auto switching)
• Power consumption: Max. 120 VA
• Operating environment: Temperature: +10 to +35 degree C (44 to 95 degree F) , Humidity: 35 to 75% RH (non-condensing)
• Guaranteed accuracy environment: Temperature: +16 to +32 degree C (55 to 90 degree F), Humidity: 35% to 70% RH (non-condensing)
• External dimensions (W x D x H) (Tolerance: +/- 5 mm): 1172 x 962 x 200 mm [The stand is not included] (46.1 x 37.9 x 7.9 inch)
• Weight: approx. 27 kg (60 lbs.)
• Compatible OS: Windows 10 / 8.1 / 8 / 7 , Mac OS 10.7 to 10.12
• Supported software: Cutting Master 4, Graphtec Pro Studio, Graphtec Studio(for Mac)
• Certifications: UL , cUL , CE making, FCC-A, EN55022-A, RoHS