IMAGin digiTrans 4mil 64" x 164' Gloss White Transit Wrap Vinyl Print Media

Product Details

• Features and Benefits:
  • Three year durability
  • Available on 6" core
  • CBS approved


• Typical Uses:
  • Bus, taxi and subway train applications
  • Station domination programs
  • Applications needing a true block-out adhesive


• Use with:
  • ColorGard LUV Series


• Physical Properties
  
  

  Property	Typical Values	Test Method
  Peel Adhesion lb./in. (N/25mm) 180° on Stainless Steel - 24 hr.	0.57 (2.5 – 9.5)	FTM - 1
  Quick Tacks, lb./in.² (N/25mm) Stainless Steel	0.68 – 1.6 (3 - 7)	FTM - 9
  Dimensional Stability, (%) 48 hours @ 158°F	max 0.2	FTM - 14 10" x 10" Sample Bonded to aluminum
  Temperature Ranges Minimum Application: End Use:	46°F (+8°C) -4°F to 158°F (-20°C to 70°C)
  Flammability	Self-extinguishing	ISO 3795
  Surface Burning Characteristics Flame Spread Smoke Density ANSI, NFPA and IFC	5 35 Class A	ASTM E84-01 or ANSI/NFPA 255 or IFC 8-1



• APPROVED BY Out Front Media and Clear Channel
  For Bus Posters including, King-size, Super King-size, and Queen-size Bus Posters with extensions and snipes, Headlight Displays, Taillight Displays, Headliners and Michelangelo.


• Durability
  The outdoor durability of the unprinted film is 3 years. JDT429 has up to 2 year removability after application. Removal after the first year may result in some slight adhesive residue, which can be easily cleaned off with alcohol or adhesive remover.


• Shelf Life
  2 year from D.O.M. when stored at 60/77°F (15/25°C) and 50% relative humidity in the original package.


• Removability
  This product has 1 year clean and easy removability after application on many surfaces. The removability of JDT429 may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.


• Approved Printing Processes:
  
  

  Screen Printing:						HP Indigo     ☐
  UV Cured     ☐						Off-set     ☐
  Solvent     ☐						UV Off-set     ☐
  WF Digital: UV Inkjet     ☒						Thermal Transfer     ☒
  Eco-solvent     ☒						Flexographic *     ☐
  True solvent     ☒						UV Flexographic     ☐
  Canon UVgel 356     ☒						Narrow Web UV Inkjet     ☐
  Latex     ☒

  
  
  To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used. Profiles can be downloaded from www.mactac.com. Printer and heater settings and ICC profiles can also be downloaded from some O.E.M. or software manufacturer’s websites.
  
  The ICC profiles are provided solely as a customer resource. Print environments, the individual nature of printing systems, inks and software can significantly affect output. It is the customer’s responsibility to determine the suitability of any profile for use in their specific print environment.


• Limitations
  Due to the wide variability of interior walls, sealants and paints, no claims for successful applications to or removal from painted wall surfaces are made by Mactac. It is the users’ responsibility to determine the products suitability for the intended wall.
  • 1) The user is responsible for determining the product’s suitability, including adhesion and if needed, removal characteristics when used in applications other than listed specifically in this Performance Guide.
  • 2) If there are any questions about applications, please contact your Mactac sales representative to discuss your requirements for recommendations.
  • 3) If this is a printed Performance Guide it is an uncontrolled document. Please check the Mactac website for the latest, most up-to-date version.


• Recommendations
  Always test your combination of JT5000 products, inks and laminating films prior to commercial use.
  
  • 1)Printing Conditions: Print in conditioned pressroom at ±73°F (23°C) and 50% RH. Ink saturation should not exceed 270%.
  • 2)Drying Requirements: Solvent, Eco-solvent and Mild-solvent inkjet prints require 24 - 48 hr. drying time - open to the air. Inks do not dry when printed media is rolled up. The prints must be dry prior to lamination.
  • 3)Laminating Conditions: If the printed graphic is likely to be exposed to corrosive liquids, smoke, fumes and highly polluted areas or there is a likelihood of scratching it is highly recommended you laminate with Permacolor ColorGard LUV series (intermediate) or PromoGard PG7000 Gloss (economical) overlaminating films. Please be aware that adding an overlaminate will significantly reduce conformability to complex surfaces.
  • 4)Transportation Conditions: To allow for easy transportation, StreetRAP series can be rolled up, with the image out, with a minimum diameter of 6 inches (15cm). During transportation or storage, avoid exposing them to extreme temperature and humidity changes.


• • Values given are typical and are not necessarily for use in specification.

• Adhesive Type: Permanent Acrylic
• Color: White
• Films: Vinyl (PVC)
• Length: 164'
• Width: 64"
• Liner Category: 74# White Kraft
• Outdoor Durability: 3 Years
• Precise Program: N
• Print Method: Latex, UV Inkjet
• Thickness: 4.0 mil