Interlam Pro Anti-Graffiti UV 2.0mil 54" x 50' PS Overlaminating Film
399.59 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

Interlam Pro Anti-Graffiti UV 2.0mil 54" x 50' PS Overlaminating Film

Part #: IAG54050
Brand: Drytac
  • Film Length: 50'
  • Film Width: 54"
  • Film Thickness: 2 mil
  • Base Film: 20µ (0.8 mil) High Gloss Polyester
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1

Product Description

This Interlam Pro Anti-Graffiti UV 2.0mil 54" x 50' PS Overlaminating Film is a high performance barrier film with strong anti-graffiti characteristics and a pressure sensitive acrylic adhesive, which is protected by a siliconized PE coated paper release liner. The gloss finish of Interlam Pro Anti-Graffiti film provides a high degree of resistance to ultraviolet light, dirt and pollutants, and the film offers superb clarity, detail and color contrast. This Interlam Pro Anti-Graffiti UV 2.0mil 54" x 50' PS Overlaminating Film is perfect for retail advertising graphics, event graphics or displays where graffiti might be a possibility, such as outdoor bus shelters, train stations or kiosks. Also, the Interlam Pro Anti-Graffiti film can be used for construction barricade applications.

Product Details

  • Ideal for a variety of applications, including bus shelters, hoardings and outdoor advertising locations in high traffic areas.
  • Protac Anti-Graffi ti has a Class 1 Fire Rating according to UK standards for surface spread of flame, making it perfect for applications in public areas that require compliance with strict fire regulations, such as airports, hotels and hospitals.
  • Both the film and the adhesive contain UV stabilizers, which protect against both UV degradation and potential mechanical damage.

Item Specifications

  • Film Length: 50'
  • Film Width: 54"
  • Film Thickness: 2 mil
  • Base Film: 20µ (0.8 mil) High Gloss Polyester
  • Ratio Film/Adhesive: 0.7:1
  • UV Protection Factor: Film and adhesive contain UV stabilizers, which prevent film degradation and provide UV protection to the underlying image
  • Outdoor Durability: Up to 3 years
  • Adhesive: 30µ (1.2 mil) Solvent Acrylic (Pressure Sensitive)
  • Heat Resistance Range: 70°C-95°C (158°F-203°F)
  • Peel Strength (20 min, FTM1): 15 N/25mm
  • Release Liner: One Side Siliconized Polyester
  • Application: Anti-Graffiti, Outdoor Graphics
  • Part Number: IAG54050

Technical Data

Interlam Pro Anti-Graffi ti is a 0.8 mil (20µ) high performance PCTFE film with strong anti-graffiti characteristics and a pressure sensitive acrylic adhesive that is protected by a siliconized PE coated paper release liner. The film is flame resistant and provides a high degree of resistance to ultraviolet light, dirt and pollutants, and the gloss finish offers superb clarity, detail and color contrast. It wipes clean of virtually any spray paint and can be cleaned with most solvents and detergents without adverse effect. The premium adhesive creates a strong bond to UV inks as well as latex and other ink technologies.

Typical Applications
  • Ideal for retail advertising graphics, event graphics or displays where graffiti might be a possibility, such as outdoor bus shelters, train stations and kiosks.
  • Can be used for construction barricade applications.
  • Can be used for long-term exterior applications.

Product Structure

Film High Performance PCTFE
Adhesive Acrylic (Pressure Sensitive)
Release Liner Siliconized PE Coated Paper


Physical Characteristics

Film Thickness 0.8 mil (20µ)
Adhesive Layer 1.2 mil (30µ)
Film/Adhesive Ratio 0.8:1.2
UV Protection Factor UV resistant
Outdoor Durability 5 years
Service Temperature Range -13°F to 302°F (-25°C to 150°C)
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment Type Temperature Speed
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Downloadable Information

Questions & Answers

Submit a New Question

Get Code