Interlam Pro Emerytex UV 5mil 51" x 300' PS Overlaminating Film
714.00 NewCondition OutOfStock

We're sorry, but we no longer offer this item.

Call us at 1-800-944-4573 for personalized recommendations

or check out these similar items that may be a good fit:

Interlam Pro Emerytex UV 5mil 51" x 300' PS Overlaminating Film

Part #: ILT51300
Brand: Drytac
  • Matte PVC overlaminates with a pebble texture finish
  • Film Width: 51"
  • Film Thickness: 5 mil
  • Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)
We're here for you!
Please call 1-800-944-4573 for help finding a comparable solution, or
Click to Chat

SWIPE FOR MORE IMAGES
  • 0
  • 1

Product Description

This Interlam Pro Emerytex UV 5mil 51" x 300' Overlaminating Film is a flexible monomeric soft calendared PVC laminating film with a matte pebble finish, coated on one side with a pressure sensitive, aqueous acrylic adhesive that prevents silvering and produces a strong bond to UV inks as well as latex and other ink technologies. The Interlam Pro Emerytex film has anti-slip properties that have been tested and are approved for floor graphics. Also, this film provides UV protection for outdoor graphics. This Interlam Pro Emerytex UV 5mil 51" x 300' Overlaminating Film is perfect for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff-resistant finish is required.

Product Details

    Features:

  • Matte PVC overlaminates with a pebble texture finish
  • Utilizes various acrylic adhesives (aqueous, solvent and Heatset®)


    Benefits:

  • Anti-slip properties make it suitable for floor graphics
  • Recommended for use in medium to high traffic indoor display areas
  • Ideal for tradeshow graphics, POP displays or event signage
  • Low Slip Potential Rating according to EN 13036-4

Item Specifications

  • Film Length: 300'
  • Film Width: 51"
  • Film Thickness: 5 mil
  • Base Film: 100μ (4 mil)
  • Film: Matte Pebble Finish, Monomeric Calendared PVC
  • Adhesive: Aqueous Acrylic (Pressure Sensitive)
  • Release Liner: 2 Side PE Coated, 1 Side Siliconized Kraft Paper
  • Adhesive Layer: 25µ (1 mil)
  • Ratio Film / Adhesive: 4:1
  • UV Protection Factor: Film and adhesive contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image
  • Outdoor Durability: 3+ years
  • Heat Resistance Range: 70°C-95°C (158°F-203°F)
  • Peel Strength (20 min, FTM1): 11 N/25mm
  • Part Number: ILT51300

Technical Data

Interlam Pro Emerytex is a 4 mil (100µ) monomeric soft calendared PVC laminating film with a matte pebble textured finish, coated on one side with a pressure sensitive acrylic adhesive that is protected by a bleached Kraft release paper coated on both sides with PE and siliconized on the release side. Interlam Pro Emerytex has been tested according to the EN 13036-4 test method and awarded a rating of low slip potential.

Typical Applications
  • Recommended for laminating mounted prints that will be placed in high traffi c indoor and outdoor display areas.
  • Provides UV protection for outdoor graphics.
  • Ideal for tradeshow graphics, POP displays, mouse pads, counter mats, event signage, floor graphics, and other signage where a scuff -resistant finish is required.
  • Can be combined with Drytac’s FloorTac print media to create a slip-resistant fl oor graphic for low to mid-traffic areas (up to 6 months).

Product Structure

Film Matte Pebble Textured Monomeric Soft Calendared PVC
Adhesive Acrylic (Pressure Sensitive)
Release Liner 2 Side PE Coated, 1 Side Siliconized Kraft


Physical Characteristics

Film Thickness 4 mil (100µ)
Adhesive Layer 1 mil (25µ)
Film/Adhesive Ratio 4:1
UV Protection Factor Film contains UV stabilizers, which prevent film degradation and provide UV protection to the underlying image
Outdoor Durability 3 years
Service Temperature Range -13°F to 302°F (-25°C to 150°C)
Peel Strength (20 min, FTM1) 11 N/25mm
Shelf Life Use within 1 year after opening original box
Storage Conditions 59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity


Process Settings

Equipment Type Temperature Speed
Roller Laminator Room temperature to 104°F (40°C) 1 ft to 8 ft (0.3m to 2.5m) per minute
Press Not recommended

Questions & Answers

Submit a New Question