0
Promotions & Deals
Contract Holder Contract # GS-03F-053AA
Need Help 1-800-944-4573 1-800-944-4573
Lassco Cornerounder 3/8" Standard Size Cutting Unit - CU38
$94.40 NewCondition InStock
Lassco Cornerounder 3/8" Standard Size Cutting Unit - CU38

Lassco Cornerounder 3/8" Standard Size Cutting Unit - CU38

Part #: CU38
1 Questions, 1 Answers

Was: $108.00

Your Price: $94.40

You Save: 13%

Brand New Price Match Guarantee In Stock Free Shipping
Main Features:
  • Standard Size Radius Die for Lassco Wizer Cornerounder Corner Cutters
  • Compatible with Lassco Wizer CR-20, CR-50B, CR-50, CR-50P and CR-50XP Corner Rounders
  • Holds up to 1/2" maximum material thickness
  • Radius: 3/8"
Additional Sizes Below

AdditionalOptions

Product Item Number Price Qty
Lassco Cornerounder 1/8" Standard Size Cutting Unit - CU18 Item Number : CU18 Price :

Was: $108.00

Your Price: $92.57

You Save: 14%

Qty :
Lassco Cornerounder 1/4" Standard Size Cutting Unit - CU14 Item Number : CU14 Price :

Was: $108.00

Your Price: $94.40

You Save: 13%

Qty :
Lassco Cornerounder 1/2" Standard Size Cutting Unit - CU12 Item Number : CU12 Price :

Was: $108.00

Your Price: $94.40

You Save: 13%

Qty :

ProductDescription

This is a standard radius die for the Lassco Cornerounder series of Corner Cutting machines. This die is compatible with the Cornerounder CR-20, CR-50B, CR-50, CR-50P, and CR-50XP. These cutting units are easy to change on the lassco equipment and can handle up to a 1/2" stack of product.

Product Details

  • Standard Size Radius Die for Lassco Wizer Cornerounder Corner Cutters
  • Compatible with Lassco Wizer CR-20, CR-50B, CR-50, CR-50P and CR-50XP Corner Rounders
  • Holds up to 1/2" maximum material thickness
  • Radius: 3/8"
  • Part Number: CU38

ProductReviews

There are No Reviews on this Product Yet
  • 1 star
    1 star
    1 star
    1 star
    1 star

DemonstrationVideo

Transcript: This is the Lassco Wizer Cornerounder CR-20 Corner Cutter!When you purchase this machine you get to choose one of the four sizes, which can also be purchased separately under these product numbers.It also comes with a right angle push block.First place in your cutting die by lifting the handle enough to create space to insert the piece and place it into the hole correctly. Push down on the handle all the way so the piece is in fully.Next, place the corner of your first project flush against the sides of the punch die.If your sheets are small enough, press the corner block against the opposite ... Read More

This is the Lassco Wizer Cornerounder CR-20 Corner Cutter!

When you purchase this machine you get to choose one of the four sizes, which can also be purchased separately under these product numbers.

It also comes with a right angle push block.

First place in your cutting die by lifting the handle enough to create space to insert the piece and place it into the hole correctly. Push down on the handle all the way so the piece is in fully.

Next, place the corner of your first project flush against the sides of the punch die.

If your sheets are small enough, press the corner block against the opposite corner to keep the stack aligned during the cut.

Push the handle all the way down and your first corner is finished. Rotate your project to as many times as needed.

Lift the door on the side to empty out the corner shavings. Lifting and closing it may take a bit of effort.

If you want to switch out the cutting die, pry it up from the bottom using a screwdriver. Make sure to lift the handle up as well so it can come out. Then pull it up and change it out.

Questions & Answers
Q:
Will the dies for the CR-20 model fit the older Model 20? Thank You
Asked by Jim Mullins
A:
Thank you for your question. We verified with Lassco that the dies for the CR-20 is compatible with the older Model 20 machines.

Answered by MyBinding 1 years and 1 months ago ago
* Nickname:

* Your Answer:


Sign Up for Newsletter

Submit a New Question

Submit