Master 325B Hole Punch by Martin Yale
58.22 NewCondition InStock

Master 325B Hole Punch by Martin Yale

Part #: 325B
Brand: Master
3 Questions, 3 Answers
  • A lever handle paper punch that provides easier punching
  • Adjustable punch heads for convenienet 2 or 3-hole punching
  • Will accept 2 or 7 punch heads
  • Adjustable ruled paper guide ensures exact centering
  • 180 Day Manufacturer Warranty
  • Price Match Guarantee
  • Ships Free Over $75

$58.22

FREE shipping for orders over $75*

SWIPE FOR MORE IMAGES
  • 0
  • 1
video

Product Description

This Master 325B Hole Punch by Martin Yale has a lever handle paper punch that provides easier punching. Its adjustable punch heads for convenienet 2 or 3-hole punching also accept 2 or 7 punch heads. The Adjustable ruled paper guide ensures exact centering and large capacity paper chip pan with non-skid feet. The Master 325B Hole Punch is made from heavy-gauge steel construction and comes standard with three 9/32" punch heads.

Product Details

  • Extra long power-handle that provides easier punching.
  • Adjustable ruled paper guide ensures exact centering.
  • Large capacity paper chip pan.
  • Made from heavy-gauge steel construction.
  • Pre-set to punch 9/32" holes for 2, 3, 5, and 7-hole punching.
  • Comes standard with five 11/32? punch heads.

Item Specifications

  • Hole Diameter: 9/32"
  • Number of Holes: 5 standard (accepts 2,3,5 and 7)
  • Sheet Capacity: 40
  • Battery Operated: No
  • Electrical: No
  • Product Dimensions: 6.8 L x 11.0 W x 7.3 H in (17.0 x 28.0 x 18.0 cm)
  • Warranty: 180 Day Manufacturer's Warranty (Extended Warranties Available)
  • Product Weight: 6.6 lbs (3.0 kg)

Demonstration Video

Master 325B Hole Punch by Martin Yale

Transcript: This is the Master 325B Hole Punch!

It says it can punch up to 24 sheets, but it’s a tight fit, so it’ll probably be closer to 20 as seen here. Firmly push on the lever to make the punch.

There is an arrow right here. This is the measuring position for the edge guide, which goes out to 15 inches.

From time to time, empty the waste tray on the bottom. When you’re done, it just snaps back in place.

You can remove, add, and change the punch heads. To do so unscrew them in the back. The piece on the bottom will come off as well.

Now remove the small metal piece on the end of the lev ...
Read More
This is the Master 325B Hole Punch!

It says it can punch up to 24 sheets, but it’s a tight fit, so it’ll probably be closer to 20 as seen here. Firmly push on the lever to make the punch.

There is an arrow right here. This is the measuring position for the edge guide, which goes out to 15 inches.

From time to time, empty the waste tray on the bottom. When you’re done, it just snaps back in place.

You can remove, add, and change the punch heads. To do so unscrew them in the back. The piece on the bottom will come off as well.

Now remove the small metal piece on the end of the lever pole. You can slide the pole out from there, or it is easier to remove all the punch heads and then slide it out.

Once it’s out you can make your adjustments. Now in the pole is a crevasse; this piece fits into it when we slide the punch head in. This means we have to the gray piece down enough to align it with the crevasse—which was much harder than I thought it should have been.

Once all your punch heads are aligned in anywhere from a 2 hole punch pattern to a 7 hole pattern, put the little metal piece back on and screw them all back on.

It’s a pretty basic hole punch.

Compare to Similar Paper Punches


Model Number Model Hole Diameter (inch) Number of Holes Capacity (sheets) Battery Operated Electrical (volt)
325B 9/32" 2 to 7 24 No Manual
EP312 9/32" 3 10 Optional 115
EP323 9/32" 2 or 3 12 Optional 115
DP20 9/32" 2 or 3 20 No Manual
MP3 9/32" 3 20 No Manual
MP40 9/32" 3 30 No Manual
MP50 9/32" 3 40 No Manual
3020B 9/32" 2 or 3 30 No Manual
5325B 9/32" 2 to 7 32 No Manual
5335B 11/32" 2 to 7 32 No Manual
5340B 13/32" 2 to 7 32 No Manual
525M 11/32" 2 to 7 40 No Manual
1325B 9/32" 2 to 7 40 No Manual
1340PB 12/32" 2 to 7 40 No Manual
MP80 9/32" 3 80 No Manual
EP210 1/4" 2 12 Optional Manual
MP250 9/32" 2 40 No Manual
3275B 9/32" 2 40 No Manual

Questions & Answers

We do, that would be Master 2525B Punch Head 9/32" for 3-25B https://www.mybinding.com/martin-yale-2525b-punch-head-9-32-for-3-25b.html.

Answered by MyBinding.com
3 years and 2 months ago ago
Thank you for your question. The Master 325B Hole Punch by Martin Yale would be able to be used with legal sized paper, the measuring guide goes up to 15".

Answered by MyBinding
5 years and 10 months ago ago
Thank you for your question. We spoke with the manufacturer and unfortunately they do not stock replacement parts for the Master 325B Hole Punch.

Answered by MyBinding
7 years and 4 months ago ago

Submit a New Question