MediaShield Heatset Matte UV 4mil 55" x 328' Overlaminate
1020.79
NewCondition
OutOfStock
We're sorry, but we no longer offer this item.
Call us at 1-800-944-4573 for personalized recommendations
or check out these similar items that may be a good fit:
MediaShield Heatset Matte UV 4mil 55" x 328' Overlaminate
SWIPE FOR MORE IMAGES
- 0
- 1
Product Description
MediaShield Matt UV 4mil 55" x 328' overlaminating film offers a non glare, matte finish without sacrificing color definition. It is perhaps the highest quality matte laminating film on the market today. MediaShield Matt UV is a PVC (vinyl) overlaminating film coated with a solvent acrylic adhesive. MediaShield Matt UV is recommended for situations where a non glare finish is required or specific lighting conditions cannot be controlled. It is ideal for images such as trade show and POP displays that will be viewed under direct lighting from many different angles. Get 55" x 328' of 4mil MediaShield Heatset Matt UV film with every order. Product number MT55328.
Product Details
- Film Width: 55"
- Film Length: 328'
- Film Thickness: 4.0mil
- Core Size: 3"
- Finish: Dead Matte
- Base Film: 3.0mil (75 micron) PVC (vinyl)
- Adhesive: 1.0 mil (25 micron) solvent acrylic
- Initial Tack: Low
- Application Speed: 1' - 6' per minute
- Application Temperature: 185 F - 210 F
- Release Liner: Moisture Stable Paper (70gsm)
Item Specifications
- A hybrid between thermal and pressure sensitive films.
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Bond well to inkjet output with high ink coverage - even on photo gloss paper and digital photo laser output (Lambda / Lightjet).
- Image can be trimmed flush, or even die-cut without fear of delamination.
- Due to its quick setup / curing time, MediaShield laminated graphics can be handled or rolled immediately after processing.
- Protected by a release liner because the adhesive on these films is slightly tacky when cool.
Tips
Tips For Applying MediaShield UV Heatset Films:
- MediaShield UV Heatset films are an excellent choice for laminating multiple images which have been mounted onto a single board or substrate because they minimize air entrapment around the edges of each image.
- To keep the film from stretching as it becomes soft and pliable when heated, apply only minimal brake tension to the unwind supply shaft and the release liner take-up.
- Mediashield and thermal overlaminating films can be combined when encapsulating a graphic. For example: MediaShield Emerytex on the front and MHL White Backing on the back of the image is an ideal combination for trade show applications.
- Adjust the take up shaft so that the release liner is removed just prior to entering the nip rollers. By reducing the adhesive's exposure to the air, there is less chance of picking up dust particles.
