MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive
277.49 NewCondition InStock

MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive

Part #: PSA26-38164
Brand: Drytac
1 Questions, 1 Answers
  • Film Finish: Clear Polyester
  • Core Size: 3"
  • Thickness: 0.5 mil
  • Hot or Cold: Hot
  • Price Match Guarantee
  • Free Shipping


Buy Now - Pay Later

From $25.67 a month

with Credit Key

Qualifies for FREE Shipping!*
  • 0
  • 1
Product NameItem NumberPriceQty
MediaTac 25.5" x 164' Pressure Sensitive Aqueous AdhesivePSA26-25164
MediaTac 38" x 328' Pressure Sensitive Aqueous AdhesivePSA26-38328
MediaTac 41" x 328' Pressure Sensitive Aqueous AdhesivePSA26-41328
MediaTac 51" x 164' Pressure Sensitive Aqueous AdhesivePSA26-51164
MediaTac 51" x 328' Pressure Sensitive Aqueous AdhesivePSA26-51328

Product Description

This 38" x 164' MediaTac consists of a smooth coating of Drytac's aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive's new non-slip release liner allows boards pre-coated with MediaTac to stack safely without slippage. The 38" x 164' MediaTac adhesive is ideal for image decal and high volume mounting applications. This adhesive can be used for pre-coating mounting boards and for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam and tempered hardboard. All of this makes MediaTac an economical general purpose pressure-sensitive aqueous adhesive with a non-slip release liner. Product number PSA26-38164.

Product Details

  • Roll Width: 38"
  • Roll Length: 164'
  • Core Size: 3"
  • Laminate Type: MediaTac Adhesive
  • Filmic Carrier: 0.5 mil (13 micron) clear polyester
  • Adhesive Bond: Permanent
  • Adhesive Base: High
  • Application Speed: 1' - 8' per minute
  • Application Temp: Room Temperature - 120F (49 C)
  • Release Liner: Moisture Stable Paper (60 lbs) (100 gsm)

Product Reviews

Write Your Own Review
You're reviewing:MediaTac 38" x 164' Pressure Sensitive Aqueous Adhesive
Your Rating

Technical Data

MediaTac is a 0.5 mil (12µ) clear PET film, coated on both sides with a pressure sensitive acrylic adhesive, one of which is protected by a bleached clay coated Kraft paper siliconized on both sides with a differential release. The adhesive is self-wound on the release liner.

Typical Applications
  • Developed for photo labs where a high grade of moisture stability within the mounting film is required.
  • Ideal for high-volume mounting, including pre-coating boards and image decal applications.
  • Recommended for mounting prints to smooth, porous substrates, such as white display board, foam boards, Gatorfoam, and tempered hardboard.

Product Structure

AdhesiveAcrylic (Pressure Sensitive)
FilmClear PET
AdhesiveAcrylic (Pressure Sensitive)
Release Liner2 Side Clay Coated, 2 Side Siliconized Kraft

Physical Characteristics

Film Thickness0.5 mil (12µ)
Adhesive Layer1 mil (25µ) on each side
Film/Adhesive Ratio1:0.5:1
UV Protection FactorNot Applicable
Outdoor DurabilityNot Applicable
Service Temperature Range-4°F to 248°F (-20°C to 120°C)
Shelf LifeUse within 1 year after opening original box
Storage Conditions59°F to 72°F (15°C to 22°C); 50 - 55% Relative Humidity

Process Settings

Equipment TypeTemperatureDwell Time
Roller LaminatorRoom temperature to 104°F (40°C)1 ft to 8 ft (0.3m to 2.5m) per minute
PressNot recommended

Downloadable Information

Questions & Answers

Thank you for your question. The adhesive can be attached to the item you want to mount, i.e. photo print and when ready to apply it to a substrate you’d peel off the liner that’s protecting the 2nd surface. You wouldn't need to attach it to something else. We have it in a size 25.5" x 15' roll, that is perfect to sample with your applications with laser/water cutter.

Answered by MyBinding
2 years and 12 months ago ago

Submit a New Question